Add support for X-NUCLEO-IDW01M1 & X-NUCLEO-IDW04A1

Author: betzw

README.md

@@ -65,7 +65,7 @@ This example supports these shields:
 
 * [AT86RF233/212B](https://github.com/ARMmbed/atmel-rf-driver)
 * [NXP-MCR20a](https://github.com/ARMmbed/mcr20a-rf-driver)
-* [X-NUCLEO-IDS01A4](https://github.com/ARMmbed/stm-spirit1-rf-driver) (*a.k.a.* Spirit1) radio shields. Check instructions for compilation [here](#compile-configuration-for-spirit1)
+* [X-NUCLEO-IDS01A4](https://github.com/ARMmbed/stm-spirit1-rf-driver) (*a.k.a.* Spirit1) radio shields. Check instructions for compilation [here](#compile-configuration-for-spirit1).
 
 To select the radio shield make sure that the `mbed_app.json` file points to the correct radio driver type:
 
@@ -122,12 +122,12 @@ For sub-GHz shields ([Spirit1](https://github.com/ARMmbed/stm-spirit1-rf-driver)
 
 ```json
 "mbed-mesh-api.6lowpan-nd-channel-page": 2,
-"mbed-mesh-api.6lowpan-nd-channel": 1
+"mbed-mesh-api.6lowpan-nd-channel": 1,
+"mbed-mesh-api.6lowpan-nd-channel-mask": "(1<<1)"
 ```
 
 For more information about the radio shields, see [the related documentation](docs/radio_module_identify.md). 
 
-=======
 #### Supported combinations of board and shields
 
 See Mesh-minimal's [Notes on different hardware](https://github.com/ARMmbed/mbed-os-example-mesh-minimal/blob/master/Hardware.md) for known combinations of development boards and RF shields that have been tested with mesh networking stack.
@@ -155,6 +155,7 @@ With Thread, you can change the operating mode of the client from the default ro
 * UBLOX_EVK_ODIN_W2. Check instructions for compilation [here](#compile-configuration-for-odin-wifi).
 * K64F + GROVE SEEED shield using [ESP8266](https://en.wikipedia.org/wiki/ESP8266) WiFi module.
 * NUCLEO_F429ZI + GROVE SEEED shield using [ESP8266](https://en.wikipedia.org/wiki/ESP8266) WiFi module.
+* [NUCLEO_F401RE](https://os.mbed.com/platforms/ST-Nucleo-F401RE/) + [X-NUCLEO-IDW0XX1](https://github.com/ARMmbed/wifi-x-nucleo-idw01m1/).
 
 To run this application using ESP8266 WiFi Interface, you need:
 
@@ -166,8 +167,8 @@ To run this application using ESP8266 WiFi Interface, you need:
 
 ```json
     "network-interface": {
-        "help": "options are ETHERNET,WIFI,MESH_LOWPAN_ND,MESH_THREAD.",
-        "value": "WIFI"
+        "help": "options are ETHERNET,WIFI_ESP8266,WIFI_IDW0XX1,WIFI_ODIN,MESH_LOWPAN_ND,MESH_THREAD.",
+        "value": "WIFI_ESP8266"
     }
 ```
 
@@ -201,14 +202,36 @@ For example, NUCLEO_F401RE requires a different serial connection:
 
 #### Compile configuration for ODIN WiFi
 
-To compile ODIN WiFi configuration, you need to tell mbed NOT to compile the related files. To do that, set up a `.mbedignore` file. An example file is available in the `configs` folder.     
+To compile ODIN WiFi configuration, you need to tell mbed NOT to compile mesh files for example. To do that, set up a `.mbedignore` file. An example file is available in the `configs` folder.
 
 This should resolve the issue:
 
-```     
-cp configs/eth-wifi-mbedignore ./.mbedignore 
-```    
- 
+``` bash
+cp configs/wifi_odin_v4.json mbed_app.json
+<use your favourite editor to modify mbed_app.json for WiFi details>
+cp configs/mesh-mbedignore ./.mbedignore 
+```
+
+#### Compile configuration for STM `X-NUCLEO-IDW0XX1` WiFi expansion boards
+
+Currently, two STM WiFi expansion boards are available:
+- `X-NUCLEO-IDW01M1`, which is the Morpho form-factor board, and
+- `X-NUCLEO-IDW04A1`, which is the Arduino form-factor board.
+
+The label is clearly printed on the PCB.
+
+To compile STM X-NUCLEO WiFi configuration, you need to tell mbed NOT to compile mesh files for example. To do that, set up a `.mbedignore` file. Example files are available in the `configs` folder.
+
+This should resolve the issue (example for `X-NUCLEO-IDW01M1`):
+
+``` bash
+cp configs/wifi_idw01m1_v4.json mbed_app.json
+<use your favourite editor to modify mbed_app.json for WiFi details>
+cp configs/mesh-mbedignore ./.mbedignore 
+```
+
+If you have issues with the `X-NUCLEO-IDW04A1` board, please double-check that macro `IDW04A1_WIFI_HW_BUG_WA` has been added to the `macros` section of the `mbed_app.json` file.
+
 ### Non listed board support 
 
 Apart from the listed configurations, this example can work on other Mbed OS supported hardware boards which support any of the given network interface including Ethernet, WiFi, Mesh (6LoWPAN) or Thread, provided the configuration fulfills condition that the target hardware has TLS entropy implemented for it. On devices where hardware entropy is not present, TLS is disabled by default. This would result in compile time failures or linking failures.

build_all.sh

@@ -59,3 +59,10 @@ mbed compile -m K64F -t $TOOL
 cp BUILD/K64F/$TOOL/mbed-os-example-client.bin k64f-$TOOL-Thread.bin
 mbed compile -m NUCLEO_F429ZI -t $TOOL
 cp ./BUILD/NUCLEO_F429ZI/$TOOL/mbed-os-example-client.bin f429zi-$TOOL-Thread.bin
+
+echo WiFi-X-Nucleo
+cp configs/wifi_idw01m1_v4.json mbed_app.json
+cp configs/wifi-idw0xx1-mbedignore .mbedignore
+mbed compile -m NUCLEO_F401RE -t $TOOL
+cp ./BUILD/NUCLEO_F401RE/GCC_ARM/mbed-os-example-client.bin f401re-$TOOL-WifiXNucleo.bin
+

configs/mesh-mbedignore

@@ -1 +1,2 @@
 easy-connect/esp8266-driver/*
+easy-connect/wifi-x-nucleo-idw01m1/*

configs/wifi_idw01m1_v4.json

@@ -0,0 +1,36 @@
+{
+    "config": {
+        "network-interface":{
+            "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_IDW0XX1, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
+            "value": "WIFI_IDW0XX1"
+        },
+        "wifi-ssid": {
+            "help": "WiFi SSID",
+            "value": "\"SSID\""
+        },
+        "wifi-password": {
+            "help": "WiFi Password",
+            "value": "\"Password\""
+        },
+        "wifi-tx": {
+            "help": "TX pin for serial connection to external device",
+            "value": "PA_9"
+        },
+        "wifi-rx": {
+            "help": "RX pin for serial connection to external device",
+            "value": "PA_10"
+        }
+    },
+    "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_mbed_client_config.h\"", "MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES","MBEDTLS_TEST_NULL_ENTROPY"],
+    "target_overrides": {
+        "*": {
+            "target.features_add": ["COMMON_PAL"],
+            "platform.stdio-baud-rate": 115200,
+            "platform.stdio-convert-newlines": true,
+            "mbed-trace.enable": 0,
+            "idw0xx1.expansion-board": "IDW01M1",
+	    "drivers.uart-serial-txbuf-size": 730,
+	    "drivers.uart-serial-rxbuf-size": 730
+        }
+    }
+}

configs/wifi_idw04a1_v4.json

@@ -0,0 +1,36 @@
+{
+    "config": {
+        "network-interface":{
+            "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_IDW0XX1, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD",
+            "value": "WIFI_IDW0XX1"
+        },
+        "wifi-ssid": {
+            "help": "WiFi SSID",
+            "value": "\"SSID\""
+        },
+        "wifi-password": {
+            "help": "WiFi Password",
+            "value": "\"Password\""
+        },
+        "wifi-tx": {
+            "help": "TX pin for serial connection to external device",
+            "value": "D8"
+        },
+        "wifi-rx": {
+            "help": "RX pin for serial connection to external device",
+            "value": "D2"
+        }
+    },
+    "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_mbed_client_config.h\"", "MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES","MBEDTLS_TEST_NULL_ENTROPY", "IDW04A1_WIFI_HW_BUG_WA"],
+    "target_overrides": {
+        "*": {
+            "target.features_add": ["COMMON_PAL"],
+            "platform.stdio-baud-rate": 115200,
+            "platform.stdio-convert-newlines": true,
+            "mbed-trace.enable": 0,
+            "idw0xx1.expansion-board": "IDW04A1",
+	    "drivers.uart-serial-txbuf-size": 750,
+	    "drivers.uart-serial-rxbuf-size": 750
+        }
+    }
+}

easy-connect.lib

@@ -1 +1 @@
-https://github.com/ARMmbed/easy-connect/#bf821b0695ccada3620a6091503eb53a2a1ac3c8
+https://github.com/ARMmbed/easy-connect/#6af200df4817ec38661b409c7ba417e6098e8f1f

main.cpp

@@ -197,7 +197,7 @@ class LedResource {
                 status_ticker.attach_us(blinky, 250000);
                 return;
             }
-            // Wait requested time, then continue prosessing the blink pattern from next position.
+            // Wait requested time, then continue processing the blink pattern from next position.
             Thread::wait(blink_args->blink_pattern.at(blink_args->position));
             blink_args->position++;
         }
@@ -326,6 +326,11 @@ void button_clicked() {
     updates.release();
 }
 
+// debug printf function
+void trace_printer(const char* str) {
+    printf("%s\r\n", str);
+}
+
 // Entry point to the program
 int main() {
 
@@ -361,6 +366,8 @@ Add MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES and MBEDTLS_TEST_NULL_ENTROPY in mbed_app
     printf("\nStarting mbed Client example\n");
 
     mbed_trace_init();
+    mbed_trace_print_function_set(trace_printer);
+    mbed_trace_config_set(TRACE_MODE_COLOR | TRACE_ACTIVE_LEVEL_INFO | TRACE_CARRIAGE_RETURN);
 
     NetworkInterface* network = easy_connect(true);
     if(network == NULL) {

mbed-os.lib

@@ -1 +1 @@
-https://github.com/ARMmbed/mbed-os/#182bbd51bc8d1b6217477c2b5de3f1d0c5e6249f
+https://github.com/ARMmbed/mbed-os/#fc1836545dcc2fc86f03b01292b62bf2089f67c3

mbed_app.json

@@ -1,7 +1,7 @@
 {
     "config": {
         "network-interface":{
-            "help": "Options are ETHERNET, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD, CELLULAR_ONBOARD",
+            "help": "Options are ETHERNET, WIFI_IDW0XX1, WIFI_ESP8266, WIFI_ODIN, MESH_LOWPAN_ND, MESH_THREAD, CELLULAR_ONBOARD",
             "value": "ETHERNET"
         },
         "mesh_radio_type": {
@@ -36,8 +36,8 @@
             "mbed-trace.enable": 0
         },
         "NUCLEO_F401RE": {
-            "wifi-tx": "PA_11",
-            "wifi-rx": "PA_12"
+            "wifi-tx": "D8",
+            "wifi-rx": "D2"
         },
         "NUCLEO_F411RE": {
             "wifi-tx": "PA_11",

pal.lib

@@ -1 +1 @@
-https://github.com/ARMmbed/pal/#60ce64d5ec358b3cf8bb492b95c5da7dad9254ca
+https://github.com/ARMmbed/pal/#4e46c0ea870631bb5bec3e4aa9fd7eebf3db21f0