KW24D: Add MMCAU drivers that is needed for mbedtls support

Signed-off-by: Mahadevan Mahesh <[email protected]>

Author: mmahadevan108

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KW24D/device/TOOLCHAIN_ARM_STD/lib_mmcau.ar

@@ -0,0 +1,339 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _CAU_API_H_
+#define _CAU_API_H_
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*!
+ * @addtogroup mmcau MMCAU Peripheral Driver
+ * @{
+ */
+#define cau_aes_set_key               mmcau_aes_set_key
+#define cau_aes_encrypt               mmcau_aes_encrypt
+#define cau_aes_decrypt               mmcau_aes_decrypt
+#define cau_des_chk_parity            mmcau_des_chk_parity
+#define cau_des_encrypt               mmcau_des_encrypt
+#define cau_des_decrypt               mmcau_des_decrypt
+#define cau_md5_initialize_output     mmcau_md5_initialize_output
+#define cau_md5_hash_n                mmcau_md5_hash_n
+#define cau_md5_update                mmcau_md5_update
+#define cau_md5_hash                  mmcau_md5_hash
+#define cau_sha1_initialize_output    mmcau_sha1_initialize_output
+#define cau_sha1_hash_n               mmcau_sha1_hash_n
+#define cau_sha1_update               mmcau_sha1_update
+#define cau_sha1_hash                 mmcau_sha1_hash
+#define cau_sha256_initialize_output  mmcau_sha256_initialize_output
+#define cau_sha256_hash_n             mmcau_sha256_hash_n
+#define cau_sha256_update             mmcau_sha256_update
+#define cau_sha256_hash               mmcau_sha256_hash
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @brief AES: Performs an AES key expansion
+ *
+ * This function performs an AES key expansion
+ *
+ * @param key Pointer to input key (128, 192, 256 bits in length).
+ * @param key_size Key size in bits (128, 192, 256)
+ * @param[out] key_sch Pointer to key schedule output (44, 52, 60 longwords)
+ * @note All pointers must have word (4 bytes) alignment
+ * @note Table below shows the requirements for the cau_aes_set_key() function when using AES128, AES192 or AES256.@n
+ * | [in] Key Size (bits)    |  [out] Key Schedule Size (32 bit data values)  |@n
+ * | :---------------------: | :--------------------------------------------: |@n
+ * |          128            |                      44                        |@n
+ * |          192            |                      52                        |@n
+ * |          256            |                      60                        |
+ */
+void cau_aes_set_key(const unsigned char *key, const int key_size, unsigned char *key_sch);
+
+/*!
+ * @brief AES: Encrypts a single 16 byte block
+ *
+ *  This function encrypts a single 16-byte block for AES128, AES192 and AES256
+ *
+ * @param in Pointer to 16-byte block of input plaintext
+ * @param key_sch Pointer to key schedule (44, 52, 60 longwords)
+ * @param nr Number of AES rounds (10, 12, 14 = f(key_schedule))
+ * @param[out] out Pointer to 16-byte block of output ciphertext
+ * @note All pointers must have word (4 bytes) alignment
+ * @note   Input and output blocks may overlap.@n
+ *         Table below shows the requirements for the cau_aes_encrypt()/cau_aes_decrypt()
+ *         function when using AES128, AES192 or AES256.@n
+ * | Block Cipher | [in] Key Schedule Size (longwords) | [in] Number of AES rounds |@n
+ * | :----------: | :--------------------------------: | :-----------------------: |@n
+ * |    AES128    |               44                   |             10            |@n
+ * |    AES192    |               52                   |             12            |@n
+ * |    AES256    |               60                   |             14            |
+ */
+void cau_aes_encrypt(const unsigned char *in, const unsigned char *key_sch, const int nr, unsigned char *out);
+
+/*!
+ * @brief AES: Decrypts a single 16-byte block
+ *
+ * This function decrypts a single 16-byte block for AES128, AES192 and AES256
+ *
+ * @param in Pointer to 16-byte block of input ciphertext
+ * @param key_sch Pointer to key schedule (44, 52, 60 longwords)
+ * @param nr Number of AES rounds (10, 12, 14 = f(key_schedule))
+ * @param[out] out Pointer to 16-byte block of output plaintext
+ * @note All pointers must have word (4 bytes) alignment
+ * @note   Input and output blocks may overlap.@n
+ *         Table below shows the requirements for the cau_aes_encrypt()/cau_aes_decrypt()
+ *         function when using AES128, AES192 or AES256.@n
+ * | Block Cipher | [in] Key Schedule Size (longwords) | [in] Number of AES rounds |@n
+ * | :----------: | :--------------------------------: | :-----------------------: |@n
+ * |    AES128    |               44                   |             10            |@n
+ * |    AES192    |               52                   |             12            |@n
+ * |    AES256    |               60                   |             14            |
+ */
+void cau_aes_decrypt(const unsigned char *in, const unsigned char *key_sch, const int nr, unsigned char *out);
+
+/*!
+ * @brief DES: Checks key parity
+ *
+ * This function checks the parity of a DES key
+ *
+ * @param key 64-bit DES key with parity bits. Must have word (4 bytes) alignment.
+ * @return  0 no error
+ * @return -1 parity error
+ */
+int cau_des_chk_parity(const unsigned char *key);
+
+/*!
+ * @brief DES: Encrypts a single 8-byte block
+ *
+ * This function encrypts a single 8-byte block with DES algorithm.
+ *
+ * @param in Pointer to 8-byte block of input plaintext
+ * @param key Pointer to 64-bit DES key with parity bits
+ * @param[out] out Pointer to 8-byte block of output ciphertext
+ * @note All pointers must have word (4 bytes) alignment
+ * @note Input and output blocks may overlap.
+ */
+void cau_des_encrypt(const unsigned char *in, const unsigned char *key, unsigned char *out);
+
+/*!
+ * @brief DES: Decrypts a single 8-byte block
+ *
+ * This function decrypts a single 8-byte block with DES algorithm.
+ *
+ * @param in Pointer to 8-byte block of input ciphertext
+ * @param key Pointer to 64-bit DES key with parity bits
+ * @param[out] out Pointer to 8-byte block of output plaintext
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input and output blocks may overlap.
+ */
+void cau_des_decrypt(const unsigned char *in, const unsigned char *key, unsigned char *out);
+
+/*!
+ * @brief MD5: Initializes the MD5 state variables
+ *
+ * This function initializes the MD5 state variables.
+ * The output can be used as input to cau_md5_hash() and cau_md5_hash_n().
+ *
+ * @param[out] md5_state Pointer to 128-bit block of md5 state variables: a,b,c,d
+ * @note All pointers must have word (4 bytes) alignment
+ */
+void cau_md5_initialize_output(const unsigned char *md5_state);
+
+/*!
+ * @brief MD5: Updates MD5 state variables with n message blocks
+ *
+ * This function updates MD5 state variables for one or more input message blocks
+ *
+ * @param msg_data Pointer to start of input message data
+ * @param num_blks Number of 512-bit blocks to process
+ * @param[in,out] md5_state Pointer to 128-bit block of MD5 state variables: a,b,c,d
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_md5_initialize_output() function must be called when starting a new hash.
+ *        Useful when handling non-contiguous input message blocks.
+ */
+void cau_md5_hash_n(const unsigned char *msg_data, const int num_blks, unsigned char *md5_state);
+
+/*!
+ * @brief MD5: Updates MD5 state variables
+ *
+ * This function updates MD5 state variables for one or more input message blocks.
+ * It starts a new hash as it internally calls cau_md5_initialize_output() first.
+ *
+ * @param msg_data Pointer to start of input message data
+ * @param num_blks Number of 512-bit blocks to process
+ * @param[out] md5_state Pointer to 128-bit block of MD5 state variables: a,b,c,d
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_md5_initialize_output() function is not required to be called
+ *        as it is called internally to start a new hash.
+ *        All input message blocks must be contiguous.
+ */
+void cau_md5_update(const unsigned char *msg_data, const int num_blks, unsigned char *md5_state);
+
+/*!
+ * @brief MD5: Updates MD5 state variables with one message block
+ *
+ * This function updates MD5 state variables for one input message block
+ *
+ * @param msg_data Pointer to start of 512-bits of input message data
+ * @param[in,out] md5_state Pointer to 128-bit block of MD5 state variables: a,b,c,d
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_md5_initialize_output() function must be called when starting a new hash.
+ */
+void cau_md5_hash(const unsigned char *msg_data, unsigned char *md5_state);
+
+/*!
+ * @brief SHA1: Initializes the SHA1 state variables
+ *
+ * This function initializes the SHA1 state variables.
+ * The output can be used as input to cau_sha1_hash() and cau_sha1_hash_n().
+ *
+ * @param[out] sha1_state Pointer to 160-bit block of SHA1 state variables: a,b,c,d,e
+ * @note All pointers must have word (4 bytes) alignment
+ */
+void cau_sha1_initialize_output(const unsigned int *sha1_state);
+
+/*!
+ * @brief SHA1: Updates SHA1 state variables with n message blocks
+ *
+ * This function updates SHA1 state variables for one or more input message blocks
+ *
+ * @param msg_data Pointer to start of input message data
+ * @param num_blks Number of 512-bit blocks to process
+ * @param[in,out] sha1_state Pointer to 160-bit block of SHA1 state variables: a,b,c,d,e
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_sha1_initialize_output() function must be called when starting a new hash.
+ *        Useful when handling non-contiguous input message blocks.
+ */
+void cau_sha1_hash_n(const unsigned char *msg_data, const int num_blks, unsigned int *sha1_state);
+
+/*!
+ * @brief SHA1: Updates SHA1 state variables
+ *
+ * This function updates SHA1 state variables for one or more input message blocks.
+ * It starts a new hash as it internally calls cau_sha1_initialize_output() first.
+ *
+ * @param msg_data Pointer to start of input message data
+ * @param num_blks Number of 512-bit blocks to process
+ * @param[out] sha1_state Pointer to 160-bit block of SHA1 state variables: a,b,c,d,e
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_sha1_initialize_output() function is not required to be called
+ *        as it is called internally to start a new hash.
+ *        All input message blocks must be contiguous.
+ */
+void cau_sha1_update(const unsigned char *msg_data, const int num_blks, unsigned int *sha1_state);
+
+/*!
+ * @brief SHA1: Updates SHA1 state variables with one message block
+ *
+ * This function updates SHA1 state variables for one input message block
+ *
+ * @param msg_data Pointer to start of 512-bits of input message data
+ * @param[in,out] sha1_state Pointer to 160-bit block of SHA1 state variables: a,b,c,d,e
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_sha1_initialize_output() function must be called when starting a new hash.
+ */
+void cau_sha1_hash(const unsigned char *msg_data, unsigned int *sha1_state);
+
+/*!
+ * @brief SHA256: Initializes the SHA256 state variables
+ *
+ * This function initializes the SHA256 state variables.
+ * The output can be used as input to cau_sha256_hash() and cau_sha256_hash_n().
+ *
+ * @param[out] sha256_state Pointer to 256-bit block of SHA2 state variables a,b,c,d,e,f,g,h
+ * @note All pointers must have word (4 bytes) alignment
+ * @return 0 No error. CAU hardware support for SHA256 is present.
+ * @return -1 Error. CAU hardware support for SHA256 is not present.
+ */
+int cau_sha256_initialize_output(const unsigned int *output);
+
+/*!
+ * @brief SHA256: Updates SHA256 state variables with n message blocks
+ *
+ * This function updates SHA256 state variables for one or more input message blocks
+ *
+ * @param msg_data Pointer to start of input message data
+ * @param num_blks Number of 512-bit blocks to process
+ * @param[in,out] sha256_state Pointer to 256-bit block of SHA2 state variables: a,b,c,d,e,f,g,h
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_sha256_initialize_output() function must be called when starting a new hash.
+ *        Useful when handling non-contiguous input message blocks.
+ */
+void cau_sha256_hash_n(const unsigned char *input, const int num_blks, unsigned int *output);
+
+/*!
+ * @brief SHA256: Updates SHA256 state variables
+ *
+ * This function updates SHA256 state variables for one or more input message blocks.
+ * It starts a new hash as it internally calls cau_sha256_initialize_output() first.
+ *
+ * @param msg_data Pointer to start of input message data
+ * @param num_blks Number of 512-bit blocks to process
+ * @param[out] sha256_state Pointer to 256-bit block of SHA2 state variables: a,b,c,d,e,f,g,h
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_sha256_initialize_output() function is not required to be called
+ *        as it is called internally to start a new hash.
+ *        All input message blocks must be contiguous.
+ */
+void cau_sha256_update(const unsigned char *input, const int num_blks, unsigned int *output);
+
+/*!
+ * @brief SHA256: Updates SHA256 state variables with one message block
+ *
+ * This function updates SHA256 state variables for one input message block
+ *
+ * @param msg_data Pointer to start of 512-bits of input message data
+ * @param[in,out] sha256_state Pointer to 256-bit block of SHA2 state variables: a,b,c,d,e,f,g,h
+ * @note All pointers must have word (4 bytes) alignment
+ * @note  Input message and digest output blocks must not overlap.
+ *        The cau_sha256_initialize_output() function must be called when starting a new hash.
+ */
+void cau_sha256_hash(const unsigned char *input, unsigned int *output);
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*! @}*/
+#endif /* _CAU_API_H_ */