[NANO130] Override wait_ns(...) to provide more accurate implementation

NANO100 series doesn't support cache and so cannot provide zero-wait state
flash performance.

Author: ccli8

targets/TARGET_NUVOTON/TARGET_NANO100/wait_ns.c

@@ -0,0 +1,58 @@
+/*
+ * Copyright (c) 2018-2020, Nuvoton Technology Corporation
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "cmsis.h"
+#include "platform/mbed_mpu_mgmt.h"
+#include "platform/mbed_toolchain.h"
+#include "platform/mbed_wait_api.h"
+
+/* Override wait_ns to provide more accurate implementation
+ *
+ * NOTE1: NANO100 series doesn't support cache and so cannot provide zero-wait
+ *        state flash performance.
+ * NOTE2: NANO100 series doesn't support MPU. The mbed_mpu_manager...() MPU functions
+ *        are dummy.
+ */
+
+// Cortex-M0+, M3, M4 and M23 take 5 cycles per iteration - SUBS = 1, 2xNOP = 2, BCS = 2
+#define LOOP_SCALER 5000
+
+MBED_ALIGN(16)
+static uint16_t delay_loop_code[] = {
+    0x1E40, // SUBS R0,R0,#1
+    0xBF00, // NOP
+    0xBF00, // NOP
+    0xD2FB, // BCS .-3        (0x00 would be .+2, so 0xFB = -5 = .-3)
+    0x4770  // BX LR
+};
+
+/* Take the address of the code, set LSB to indicate Thumb, and cast to void() function pointer */
+#define delay_loop ((void(*)()) ((uintptr_t) delay_loop_code + 1))
+
+void wait_ns(unsigned int ns)
+{
+    uint32_t cycles_per_us = SystemCoreClock / 1000000;
+    // Note that this very calculation, plus call overhead, will take multiple
+    // cycles. Could well be 100ns on its own... So round down here, startup is
+    // worth at least one loop iteration.
+    uint32_t count = (cycles_per_us * ns) / LOOP_SCALER;
+
+    mbed_mpu_manager_lock_ram_execution();
+    delay_loop(count);
+    mbed_mpu_manager_unlock_ram_execution();
+}