[NUCLEO_F446ZE] Add HAL target

Inspired from NUCLEO_F446RE, only PinNames.h updated according to NUCLEO_F446ZE schematics.

Author: LMESTM

hal/targets.json

@@ -751,6 +751,18 @@
         "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
         "default_build": "small"
     },
+    "NUCLEO_F446ZE": {
+        "supported_form_factors": ["ARDUINO", "MORPHO"],
+        "core": "Cortex-M4F",
+        "default_toolchain": "uARM",
+        "extra_labels": ["STM", "STM32F4", "STM32F446ZE"],
+        "supported_toolchains": ["ARM", "uARM", "GCC_ARM", "IAR"],
+        "inherits": ["Target"],
+        "progen": {"target": "nucleo-f446ze"},
+        "detect_code": ["0778"],
+        "device_has": ["ANALOGIN", "ANALOGOUT", "CAN", "ERROR_RED", "I2C", "I2CSLAVE", "INTERRUPTIN", "PORTIN", "PORTINOUT", "PORTOUT", "PWMOUT", "RTC", "SERIAL", "SLEEP", "SPI", "SPISLAVE", "STDIO_MESSAGES"],
+        "default_build": "small"
+    },
     "B96B_F446VE": {
         "supported_form_factors": ["ARDUINO", "MORPHO"],
         "core": "Cortex-M4F",

hal/targets/hal/TARGET_STM/TARGET_STM32F4/TARGET_NUCLEO_F446ZE/PeripheralNames.h

@@ -0,0 +1,100 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_1 = (int)ADC1_BASE,
+    ADC_2 = (int)ADC2_BASE,
+    ADC_3 = (int)ADC3_BASE
+} ADCName;
+
+typedef enum {
+    DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+    UART_1 = (int)USART1_BASE,
+    UART_2 = (int)USART2_BASE,
+    UART_3 = (int)USART3_BASE,
+    UART_4 = (int)UART4_BASE,
+    UART_5 = (int)UART5_BASE,
+    UART_6 = (int)USART6_BASE
+} UARTName;
+
+#define STDIO_UART_TX  SERIAL_TX
+#define STDIO_UART_RX  SERIAL_RX
+#define STDIO_UART     UART_3
+
+typedef enum {
+    SPI_1 = (int)SPI1_BASE,
+    SPI_2 = (int)SPI2_BASE,
+    SPI_3 = (int)SPI3_BASE,
+    SPI_4 = (int)SPI4_BASE
+} SPIName;
+
+typedef enum {
+    I2C_1 = (int)I2C1_BASE,
+    I2C_2 = (int)I2C2_BASE,
+    I2C_3 = (int)I2C3_BASE,
+    FMPI2C_1 = (int)FMPI2C1_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1  = (int)TIM1_BASE,
+    PWM_2  = (int)TIM2_BASE,
+    PWM_3  = (int)TIM3_BASE,
+    PWM_4  = (int)TIM4_BASE,
+    PWM_5  = (int)TIM5_BASE,
+    PWM_8  = (int)TIM8_BASE,
+    PWM_9  = (int)TIM9_BASE,
+    PWM_10 = (int)TIM10_BASE,
+    PWM_11 = (int)TIM11_BASE,
+    PWM_12 = (int)TIM12_BASE,
+    PWM_13 = (int)TIM13_BASE,
+    PWM_14 = (int)TIM14_BASE
+} PWMName;
+
+typedef enum {
+    CAN_1 = (int)CAN1_BASE,
+    CAN_2 = (int)CAN2_BASE
+} CANName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif