|
1 | 1 | /* mbed Microcontroller Library
|
2 |
| - * Copyright (c) 2017 ARM Limited |
| 2 | + ******************************************************************************* |
| 3 | + * Copyright (c) 2017, STMicroelectronics |
| 4 | + * All rights reserved. |
3 | 5 | *
|
4 |
| - * Licensed under the Apache License, Version 2.0 (the "License"); |
5 |
| - * you may not use this file except in compliance with the License. |
6 |
| - * You may obtain a copy of the License at |
| 6 | + * Redistribution and use in source and binary forms, with or without |
| 7 | + * modification, are permitted provided that the following conditions are met: |
7 | 8 | *
|
8 |
| - * http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | + * 1. Redistributions of source code must retain the above copyright notice, |
| 10 | + * this list of conditions and the following disclaimer. |
| 11 | + * 2. Redistributions in binary form must reproduce the above copyright notice, |
| 12 | + * this list of conditions and the following disclaimer in the documentation |
| 13 | + * and/or other materials provided with the distribution. |
| 14 | + * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| 15 | + * may be used to endorse or promote products derived from this software |
| 16 | + * without specific prior written permission. |
9 | 17 | *
|
10 |
| - * Unless required by applicable law or agreed to in writing, software |
11 |
| - * distributed under the License is distributed on an "AS IS" BASIS, |
12 |
| - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
13 |
| - * See the License for the specific language governing permissions and |
14 |
| - * limitations under the License. |
| 18 | + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| 19 | + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| 20 | + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| 21 | + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| 22 | + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| 23 | + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| 24 | + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| 25 | + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| 26 | + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| 27 | + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| 28 | + ******************************************************************************* |
15 | 29 | */
|
16 | 30 |
|
17 | 31 | #include "flash_api.h"
|
|
22 | 36 |
|
23 | 37 | #if DEVICE_FLASH
|
24 | 38 |
|
25 |
| -// This is a flash algo binary blob. It is PIC (position independent code) that should be stored in RAM |
26 |
| -static uint32_t FLASH_ALGO[] = { |
27 |
| - 0xf3c04601, 0x28203007, 0x2204bf24, 0x1050eb02, 0x2810d205, 0x2203bf26, 0x1010eb02, 0xf4110880, |
28 |
| - 0xbf181f80, 0x0010f040, 0x48714770, 0x6001496f, 0x60014970, 0x68014870, 0x01f0f041, 0x486f6001, |
29 |
| - 0xf0106800, 0xd1080f20, 0xf245486d, 0x60015155, 0x60412106, 0x71fff640, 0x20006081, 0x49694770, |
30 |
| - 0xf4206808, 0x600a52f8, 0x48676008, 0xf0416801, 0x60014100, 0x47702000, 0xc18cf8df, 0x0000f8dc, |
31 |
| - 0x0004f040, 0x0000f8cc, 0x0000f8dc, 0x4000f440, 0x0000f8cc, 0x0000f8dc, 0x3080f440, 0x0000f8cc, |
32 |
| - 0x0004f1ac, 0xf4116801, 0xbf1c3f80, 0x21aaf64a, 0xd0044a53, 0x68036011, 0x3f80f413, 0xf8dcd1fa, |
33 |
| - 0xf0200000, 0xf8cc0004, 0xf8dc0000, 0xf4200000, 0xf8cc4000, 0x20000000, 0xf3c04770, 0x29203107, |
34 |
| - 0x2204bf24, 0x1151eb02, 0x2910d205, 0x2203bf26, 0x1111eb02, 0xf4100889, 0xbf181f80, 0x0110f041, |
35 |
| - 0x6802483d, 0x02f0f042, 0xf1006002, 0x22020c04, 0x2000f8cc, 0x2000f8dc, 0xea0323f8, 0x431101c1, |
36 |
| - 0x1000f8cc, 0x1000f8dc, 0x3180f441, 0x1000f8cc, 0xf4116801, 0xbf1c3f80, 0x21aaf64a, 0xd0044a30, |
37 |
| - 0x68036011, 0x3f80f413, 0xf8dcd1fa, 0xf0211000, 0xf8cc0102, 0x68011000, 0x0ff0f011, 0x2000bf04, |
38 |
| - 0x68014770, 0x01f0f041, 0x20016001, 0x4b224770, 0x1cc9b430, 0xc000f8d3, 0x0103f031, 0x0cf0f04c, |
39 |
| - 0xc000f8c3, 0x0404f103, 0x0c00f04f, 0xc000f8c4, 0xf240bf18, 0xd0252501, 0xc000f8d4, 0x0c05ea4c, |
40 |
| - 0xc000f8c4, 0xc000f8d2, 0xc000f8c0, 0xc000f8d3, 0x3f80f41c, 0xf8d4d1fa, 0xf02cc000, 0xf8c40c01, |
41 |
| - 0xf8d3c000, 0xf01cc000, 0xd0060ff0, 0xf0406818, 0x601800f0, 0x2001bc30, 0x1d004770, 0xf1021f09, |
42 |
| - 0xd1d90204, 0x2000bc30, 0x00004770, 0x45670123, 0x40023c04, 0xcdef89ab, 0x40023c0c, 0x40023c14, |
43 |
| - 0x40003000, 0x40023c00, 0x40023c10, 0x00000000 |
44 |
| -}; |
45 |
| - |
46 |
| -static const flash_algo_t flash_algo_config = { |
47 |
| - .init = 0x2b, |
48 |
| - .uninit = 0x5f, |
49 |
| - .erase_sector = 0xdb, |
50 |
| - .program_page = 0x16f, |
51 |
| - .static_base = 0x20c, |
52 |
| - .algo_blob = FLASH_ALGO |
53 |
| -}; |
54 |
| - |
55 |
| -static const sector_info_t sectors_info[] = { |
56 |
| - {0x8000000, 0x4000}, |
57 |
| - {0x8010000, 0x10000}, |
58 |
| - {0x8020000, 0x20000}, |
59 |
| - {0x8100000, 0x4000}, |
60 |
| - {0x8110000, 0x10000}, |
61 |
| - {0x8120000, 0x20000}, |
62 |
| -}; |
63 |
| - |
64 |
| -static const flash_target_config_t flash_target_config = { |
65 |
| - .page_size = 0x400, |
66 |
| - .flash_start = 0x8000000, |
67 |
| - .flash_size = 0x200000, |
68 |
| - .sectors = sectors_info, |
69 |
| - .sector_info_count = sizeof(sectors_info) / sizeof(sector_info_t) |
70 |
| -}; |
71 |
| - |
72 |
| -void flash_set_target_config(flash_t *obj) |
| 39 | +#if defined (STM32F429xx) || defined (STM32F439xx) |
| 40 | +#define FLASH_SIZE (uint32_t) 0x200000 |
| 41 | +#endif |
| 42 | + |
| 43 | +static uint32_t GetSector(uint32_t Address); |
| 44 | +static uint32_t GetSectorSize(uint32_t Sector); |
| 45 | + |
| 46 | +int32_t flash_init(flash_t *obj) |
| 47 | +{ |
| 48 | + /* Allow Access to Flash control registers and user Falsh */ |
| 49 | + if (HAL_FLASH_Unlock()) { |
| 50 | + return -1; |
| 51 | + } else { |
| 52 | + return 0; |
| 53 | + } |
| 54 | +} |
| 55 | +int32_t flash_free(flash_t *obj) |
| 56 | +{ |
| 57 | + /* Disable the Flash option control register access (recommended to protect |
| 58 | + the option Bytes against possible unwanted operations) */ |
| 59 | + if (HAL_FLASH_Lock()) { |
| 60 | + return -1; |
| 61 | + } else { |
| 62 | + return 0; |
| 63 | + } |
| 64 | +} |
| 65 | +int32_t flash_erase_sector(flash_t *obj, uint32_t address) |
| 66 | +{ |
| 67 | + /*Variable used for Erase procedure*/ |
| 68 | + static FLASH_EraseInitTypeDef EraseInitStruct; |
| 69 | + uint32_t FirstSector; |
| 70 | + uint32_t SectorError = 0; |
| 71 | + |
| 72 | + if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) { |
| 73 | + |
| 74 | + return -1; |
| 75 | + } |
| 76 | + |
| 77 | + /* Get the 1st sector to erase */ |
| 78 | + FirstSector = GetSector(address); |
| 79 | + |
| 80 | + /* Fill EraseInit structure*/ |
| 81 | + EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS; |
| 82 | + EraseInitStruct.VoltageRange = FLASH_VOLTAGE_RANGE_3; |
| 83 | + EraseInitStruct.Sector = FirstSector; |
| 84 | + EraseInitStruct.NbSectors = 1; |
| 85 | + if(HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK){ |
| 86 | + return -1; |
| 87 | + } else { |
| 88 | + return 0; |
| 89 | + } |
| 90 | +} |
| 91 | + |
| 92 | +int32_t flash_program_page(flash_t *obj, uint32_t address, const uint8_t *data, uint32_t size) |
| 93 | +{ |
| 94 | + |
| 95 | + if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) { |
| 96 | + return -1; |
| 97 | + } |
| 98 | + |
| 99 | + /* Note: If an erase operation in Flash memory also concerns data in the data or instruction cache, |
| 100 | + you have to make sure that these data are rewritten before they are accessed during code |
| 101 | + execution. If this cannot be done safely, it is recommended to flush the caches by setting the |
| 102 | + DCRST and ICRST bits in the FLASH_CR register. */ |
| 103 | + __HAL_FLASH_DATA_CACHE_DISABLE(); |
| 104 | + __HAL_FLASH_INSTRUCTION_CACHE_DISABLE(); |
| 105 | + |
| 106 | + __HAL_FLASH_DATA_CACHE_RESET(); |
| 107 | + __HAL_FLASH_INSTRUCTION_CACHE_RESET(); |
| 108 | + |
| 109 | + __HAL_FLASH_INSTRUCTION_CACHE_ENABLE(); |
| 110 | + __HAL_FLASH_DATA_CACHE_ENABLE(); |
| 111 | + |
| 112 | + while (size > 0) { |
| 113 | + if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, address, (uint64_t)*data) != HAL_OK) { |
| 114 | + return -1; |
| 115 | + } else { |
| 116 | + size--; |
| 117 | + address++; |
| 118 | + data++; |
| 119 | + } |
| 120 | + } |
| 121 | + return 0; |
| 122 | +} |
| 123 | + |
| 124 | +uint32_t flash_get_sector_size(const flash_t *obj, uint32_t address) |
| 125 | +{ |
| 126 | + |
| 127 | + if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) { |
| 128 | + return MBED_FLASH_INVALID_SIZE; |
| 129 | + } |
| 130 | + |
| 131 | + return (GetSectorSize(GetSector(address))); |
| 132 | +} |
| 133 | + |
| 134 | +uint32_t flash_get_page_size(const flash_t *obj) |
| 135 | +{ |
| 136 | + // not applicable for STM32F4 |
| 137 | + return (0x4000); // minimum sector size |
| 138 | +} |
| 139 | +uint32_t flash_get_start_address(const flash_t *obj) |
| 140 | +{ |
| 141 | + return FLASH_BASE; |
| 142 | +} |
| 143 | +uint32_t flash_get_size(const flash_t *obj) |
| 144 | +{ |
| 145 | + return FLASH_SIZE; |
| 146 | +} |
| 147 | + |
| 148 | +/** |
| 149 | + * @brief Gets the sector of a given address |
| 150 | + * @param None |
| 151 | + * @retval The sector of a given address |
| 152 | + */ |
| 153 | +static uint32_t GetSector(uint32_t address) |
| 154 | +{ |
| 155 | + uint32_t sector = 0; |
| 156 | + uint32_t tmp = address - ADDR_FLASH_SECTOR_0; |
| 157 | + if (address & 0x100000) { // handle 2nd bank |
| 158 | + sector = FLASH_SECTOR_12; |
| 159 | + tmp = address - ADDR_FLASH_SECTOR_12; |
| 160 | + } |
| 161 | + if (address < ADDR_FLASH_SECTOR_4) { // 16k sectorsize |
| 162 | + sector += tmp >>14; |
| 163 | + } else if (address < ADDR_FLASH_SECTOR_5) { //64k sector size |
| 164 | + sector += FLASH_SECTOR_4; |
| 165 | + } else { |
| 166 | + sector += 4 + (tmp >>17); |
| 167 | + } |
| 168 | + return sector; |
| 169 | +} |
| 170 | + |
| 171 | +/** |
| 172 | + * @brief Gets sector Size |
| 173 | + * @param None |
| 174 | + * @retval The size of a given sector |
| 175 | + */ |
| 176 | +static uint32_t GetSectorSize(uint32_t Sector) |
73 | 177 | {
|
74 |
| - obj->flash_algo = &flash_algo_config; |
75 |
| - obj->target_config = &flash_target_config; |
| 178 | + uint32_t sectorsize = 0x00; |
| 179 | + if((Sector == FLASH_SECTOR_0) || (Sector == FLASH_SECTOR_1) || (Sector == FLASH_SECTOR_2) ||\ |
| 180 | + (Sector == FLASH_SECTOR_3) || (Sector == FLASH_SECTOR_12) || (Sector == FLASH_SECTOR_13) ||\ |
| 181 | + (Sector == FLASH_SECTOR_14) || (Sector == FLASH_SECTOR_15)) { |
| 182 | + sectorsize = 16 * 1024; |
| 183 | + } else if((Sector == FLASH_SECTOR_4) || (Sector == FLASH_SECTOR_16)) { |
| 184 | + sectorsize = 64 * 1024; |
| 185 | + } else { |
| 186 | + sectorsize = 128 * 1024; |
| 187 | + } |
| 188 | + return sectorsize; |
76 | 189 | }
|
77 | 190 |
|
78 | 191 | #endif
|
0 commit comments