Add new ST target TARGET_NUCLEO_L053R8 to few tests

Author: PrzemekWirkus

libraries/tests/mbed/echo/main.cpp

@@ -1,6 +1,11 @@
 #include "mbed.h"
 
-#if defined(TARGET_NUCLEO_F103RB) || defined(TARGET_NUCLEO_L152RE) || defined(TARGET_NUCLEO_F401RE) || defined(TARGET_NUCLEO_F030R8)
+#elif defined(TARGET_NUCLEO_F103RB) || \
+    defined(TARGET_NUCLEO_L152RE) || \
+    defined(TARGET_NUCLEO_F302R8) || \
+    defined(TARGET_NUCLEO_F030R8) || \
+    defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_L053R8)
 #define TXPIN     STDIO_UART_TX
 #define RXPIN     STDIO_UART_RX
 #else

libraries/tests/mbed/i2c_eeprom/main.cpp

@@ -37,7 +37,8 @@ I2C i2c(P0_23, P0_22);
     defined(TARGET_NUCLEO_L152RE) || \
     defined(TARGET_NUCLEO_F302R8) || \
     defined(TARGET_NUCLEO_F030R8) || \
-    defined(TARGET_NUCLEO_F401RE)
+    defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_L053R8)
 I2C i2c(I2C_SDA, I2C_SCL);
 
 #elif defined(TARGET_K64F)

libraries/tests/mbed/i2c_eeprom_line/main.cpp

@@ -46,7 +46,8 @@ I2C i2c(P0_23, P0_22);
     defined(TARGET_NUCLEO_L152RE) || \
     defined(TARGET_NUCLEO_F302R8) || \
     defined(TARGET_NUCLEO_F030R8) || \
-    defined(TARGET_NUCLEO_F401RE)
+    defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_L053R8)
 I2C i2c(I2C_SDA, I2C_SCL);
 
 #elif defined(TARGET_K64F)
@@ -110,8 +111,8 @@ int main()
     }
 
     printf("[%s]\r\n", read_errors ? "FAIL" : "OK");
-    printf("I2C: Read errors: %d ... [%s]\r\n", read_errors, read_errors ? "FAIL" : "OK");
-    printf("EEPROM: Pattern match errors: %d ... [%s]\r\n", pattern_errors, pattern_errors ? "FAIL" : "OK");
+    printf("I2C: Read errors: %d/%d ... [%s]\r\n", read_errors, ntests, read_errors ? "FAIL" : "OK");
+    printf("EEPROM: Pattern match errors: %d/%d ... [%s]\r\n", pattern_errors, ntests, pattern_errors ? "FAIL" : "OK");
 
     result = write_errors == 0 && read_errors == 0;
     notify_completion(result);

libraries/tests/mbed/interruptin/main.cpp

@@ -29,9 +29,14 @@ void in_handler() {
 #define PIN_IN      (p11)
 #define PIN_OUT     (p12)
 
-#elif defined(TARGET_NUCLEO_F103RB) || defined(TARGET_NUCLEO_L152RE) || defined(TARGET_NUCLEO_F401RE) || defined(TARGET_NUCLEO_F030R8)
-#define PIN_IN      (PB_8)
-#define PIN_OUT     (PC_6)
+#elif defined(TARGET_NUCLEO_F103RB) || \
+    defined(TARGET_NUCLEO_L152RE) || \
+    defined(TARGET_NUCLEO_F302R8) || \
+    defined(TARGET_NUCLEO_F030R8) || \
+    defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_L053R8)
+#define PIN_IN      PB_8
+#define PIN_OUT     PC_6
 
 #elif defined(TARGET_FF_ARDUINO)
 #define PIN_OUT    D0

libraries/tests/mbed/ticker_2/main.cpp

@@ -21,7 +21,8 @@ DigitalOut out(PTA1);
     defined(TARGET_NUCLEO_L152RE) || \
     defined(TARGET_NUCLEO_F302R8) || \
     defined(TARGET_NUCLEO_F030R8) || \
-    defined(TARGET_NUCLEO_F401RE)
+    defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_L053R8)
 DigitalOut out(PA_3);
 
 #else

libraries/tests/mbed/time_us/main.cpp

@@ -19,7 +19,8 @@ DigitalOut out(D10);
     defined(TARGET_NUCLEO_L152RE) || \
     defined(TARGET_NUCLEO_F302R8) || \
     defined(TARGET_NUCLEO_F030R8) || \
-    defined(TARGET_NUCLEO_F401RE)
+    defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_L053R8)
 DigitalOut out(LED1);
 
 #else

libraries/tests/mbed/timeout/main.cpp

@@ -24,7 +24,8 @@ DigitalOut out(LED1);
     defined(TARGET_NUCLEO_L152RE) || \
     defined(TARGET_NUCLEO_F302R8) || \
     defined(TARGET_NUCLEO_F030R8) || \
-    defined(TARGET_NUCLEO_F401RE)
+    defined(TARGET_NUCLEO_F401RE) || \
+    defined(TARGET_NUCLEO_L053R8)
 DigitalOut out(LED1);
 
 #else