Updated system clock settings to run at 170MHz (max for this target). Affects both HSI and HSE modes.

Author: AGlass0fMilk

targets/TARGET_STM/TARGET_STM32G4/TARGET_STM32G474xx/TARGET_NUCLEO_G474RE/system_clock.c

@@ -37,7 +37,7 @@
                                    This value must be a multiple of 0x100. */
 
 #define USE_PLL_HSE_EXTC     0x8  // Use external clock (ST Link MCO)
-#define USE_PLL_HSE_XTAL     0x4  // Use external xtal (X3 on board - not provided by default)
+#define USE_PLL_HSE_XTAL     0x4  // Use external xtal (X3 on board)
 #define USE_PLL_HSI          0x2  // Use HSI internal clock
 
 #if ( ((CLOCK_SOURCE) & USE_PLL_HSE_XTAL) || ((CLOCK_SOURCE) & USE_PLL_HSE_EXTC) )
@@ -97,15 +97,15 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
 
     /** Configure the main internal regulator output voltage
     */
-    HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+    HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1_BOOST);
     /** Initializes the CPU, AHB and APB busses clocks
     */
     RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.HSEState = RCC_HSE_ON;
     RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
-    RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
-    RCC_OscInitStruct.PLL.PLLN = 16;
+    RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV6;
+    RCC_OscInitStruct.PLL.PLLN = 85;
     RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
     RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
     RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
@@ -115,12 +115,13 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
     /** Initializes the CPU, AHB and APB busses clocks
     */
     RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
-                                  | RCC_CLOCKTYPE_PCLK1;
+                                  | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
     RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
     RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
     RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
 
-    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_8) != HAL_OK) {
         return 0; // FAIL
     }
 
@@ -147,8 +148,8 @@ uint8_t SetSysClock_PLL_HSI(void)
     RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
     RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
     RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
-    RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
-    RCC_OscInitStruct.PLL.PLLN = 8;
+    RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV4;
+    RCC_OscInitStruct.PLL.PLLN = 85;
     RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
     RCC_OscInitStruct.PLL.PLLQ = RCC_PLLQ_DIV2;
     RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
@@ -158,12 +159,13 @@ uint8_t SetSysClock_PLL_HSI(void)
     /** Initializes the CPU, AHB and APB busses clocks
     */
     RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
-                                  | RCC_CLOCKTYPE_PCLK1;
+                                  | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
     RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
     RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
     RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+    RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
 
-    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
+    if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_8) != HAL_OK) {
         return 0; // FAIL
     }