Skip to content

Commit 9752a9b

Browse files
ChazJinChazJin
committed
Re add target support for GD32F307VG
1. Mainly change TARGET_Gigadevice --> TARGET_GigaDevice 2. Add license header
1 parent 6403b9c commit 9752a9b

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

87 files changed

+36737
-0
lines changed

‎targets/TARGET_GigaDevice/TARGET_GD32F30X/GD32F30x_standard_peripheral/Include/gd32f30x_adc.h

Lines changed: 396 additions & 0 deletions
Large diffs are not rendered by default.

‎targets/TARGET_GigaDevice/TARGET_GD32F30X/GD32F30x_standard_peripheral/Include/gd32f30x_bkp.h

Lines changed: 243 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,243 @@
1+
/*!
2+
\file gd32f30x_bkp.h
3+
\brief definitions for the BKP
4+
5+
\version 2018-10-10, V1.1.0, firmware for GD32F30x (The version is for mbed)
6+
*/
7+
8+
/*
9+
Copyright (c) 2018, GigaDevice Semiconductor Inc.
10+
11+
All rights reserved.
12+
13+
Redistribution and use in source and binary forms, with or without modification,
14+
are permitted provided that the following conditions are met:
15+
16+
1. Redistributions of source code must retain the above copyright notice, this
17+
list of conditions and the following disclaimer.
18+
2. Redistributions in binary form must reproduce the above copyright notice,
19+
this list of conditions and the following disclaimer in the documentation
20+
and/or other materials provided with the distribution.
21+
3. Neither the name of the copyright holder nor the names of its contributors
22+
may be used to endorse or promote products derived from this software without
23+
specific prior written permission.
24+
25+
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
26+
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
27+
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
28+
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
29+
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
30+
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
31+
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
32+
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
33+
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
34+
OF SUCH DAMAGE.
35+
*/
36+
37+
#ifndef GD32F30X_BKP_H
38+
#define GD32F30X_BKP_H
39+
40+
#include "gd32f30x.h"
41+
42+
/* BKP definitions */
43+
#define BKP BKP_BASE /*!< BKP base address */
44+
45+
/* registers definitions */
46+
#define BKP_DATA0 REG16((BKP) + 0x04U) /*!< BKP data register 0 */
47+
#define BKP_DATA1 REG16((BKP) + 0x08U) /*!< BKP data register 1 */
48+
#define BKP_DATA2 REG16((BKP) + 0x0CU) /*!< BKP data register 2 */
49+
#define BKP_DATA3 REG16((BKP) + 0x10U) /*!< BKP data register 3 */
50+
#define BKP_DATA4 REG16((BKP) + 0x14U) /*!< BKP data register 4 */
51+
#define BKP_DATA5 REG16((BKP) + 0x18U) /*!< BKP data register 5 */
52+
#define BKP_DATA6 REG16((BKP) + 0x1CU) /*!< BKP data register 6 */
53+
#define BKP_DATA7 REG16((BKP) + 0x20U) /*!< BKP data register 7 */
54+
#define BKP_DATA8 REG16((BKP) + 0x24U) /*!< BKP data register 8 */
55+
#define BKP_DATA9 REG16((BKP) + 0x28U) /*!< BKP data register 9 */
56+
#define BKP_DATA10 REG16((BKP) + 0x40U) /*!< BKP data register 10 */
57+
#define BKP_DATA11 REG16((BKP) + 0x44U) /*!< BKP data register 11 */
58+
#define BKP_DATA12 REG16((BKP) + 0x48U) /*!< BKP data register 12 */
59+
#define BKP_DATA13 REG16((BKP) + 0x4CU) /*!< BKP data register 13 */
60+
#define BKP_DATA14 REG16((BKP) + 0x50U) /*!< BKP data register 14 */
61+
#define BKP_DATA15 REG16((BKP) + 0x54U) /*!< BKP data register 15 */
62+
#define BKP_DATA16 REG16((BKP) + 0x58U) /*!< BKP data register 16 */
63+
#define BKP_DATA17 REG16((BKP) + 0x5CU) /*!< BKP data register 17 */
64+
#define BKP_DATA18 REG16((BKP) + 0x60U) /*!< BKP data register 18 */
65+
#define BKP_DATA19 REG16((BKP) + 0x64U) /*!< BKP data register 19 */
66+
#define BKP_DATA20 REG16((BKP) + 0x68U) /*!< BKP data register 20 */
67+
#define BKP_DATA21 REG16((BKP) + 0x6CU) /*!< BKP data register 21 */
68+
#define BKP_DATA22 REG16((BKP) + 0x70U) /*!< BKP data register 22 */
69+
#define BKP_DATA23 REG16((BKP) + 0x74U) /*!< BKP data register 23 */
70+
#define BKP_DATA24 REG16((BKP) + 0x78U) /*!< BKP data register 24 */
71+
#define BKP_DATA25 REG16((BKP) + 0x7CU) /*!< BKP data register 25 */
72+
#define BKP_DATA26 REG16((BKP) + 0x80U) /*!< BKP data register 26 */
73+
#define BKP_DATA27 REG16((BKP) + 0x84U) /*!< BKP data register 27 */
74+
#define BKP_DATA28 REG16((BKP) + 0x88U) /*!< BKP data register 28 */
75+
#define BKP_DATA29 REG16((BKP) + 0x8CU) /*!< BKP data register 29 */
76+
#define BKP_DATA30 REG16((BKP) + 0x90U) /*!< BKP data register 30 */
77+
#define BKP_DATA31 REG16((BKP) + 0x94U) /*!< BKP data register 31 */
78+
#define BKP_DATA32 REG16((BKP) + 0x98U) /*!< BKP data register 32 */
79+
#define BKP_DATA33 REG16((BKP) + 0x9CU) /*!< BKP data register 33 */
80+
#define BKP_DATA34 REG16((BKP) + 0xA0U) /*!< BKP data register 34 */
81+
#define BKP_DATA35 REG16((BKP) + 0xA4U) /*!< BKP data register 35 */
82+
#define BKP_DATA36 REG16((BKP) + 0xA8U) /*!< BKP data register 36 */
83+
#define BKP_DATA37 REG16((BKP) + 0xACU) /*!< BKP data register 37 */
84+
#define BKP_DATA38 REG16((BKP) + 0xB0U) /*!< BKP data register 38 */
85+
#define BKP_DATA39 REG16((BKP) + 0xB4U) /*!< BKP data register 39 */
86+
#define BKP_DATA40 REG16((BKP) + 0xB8U) /*!< BKP data register 40 */
87+
#define BKP_DATA41 REG16((BKP) + 0xBCU) /*!< BKP data register 41 */
88+
#define BKP_OCTL REG16((BKP) + 0x2CU) /*!< RTC signal output control register */
89+
#define BKP_TPCTL REG16((BKP) + 0x30U) /*!< tamper pin control register */
90+
#define BKP_TPCS REG16((BKP) + 0x34U) /*!< tamper control and status register */
91+
92+
/* bits definitions */
93+
/* BKP_DATA */
94+
#define BKP_DATA BITS(0,15) /*!< backup data */
95+
96+
/* BKP_OCTL */
97+
#define BKP_OCTL_RCCV BITS(0,6) /*!< RTC clock calibration value */
98+
#define BKP_OCTL_COEN BIT(7) /*!< RTC clock calibration output enable */
99+
#define BKP_OCTL_ASOEN BIT(8) /*!< RTC alarm or second signal output enable */
100+
#define BKP_OCTL_ROSEL BIT(9) /*!< RTC output selection */
101+
#define BKP_OCTL_CCOSEL BIT(14) /*!< RTC clock output selection */
102+
#define BKP_OCTL_CALDIR BIT(15) /*!< RTC clock calibration direction */
103+
104+
/* BKP_TPCTL */
105+
#define BKP_TPCTL_TPEN BIT(0) /*!< tamper detection enable */
106+
#define BKP_TPCTL_TPAL BIT(1) /*!< tamper pin active level */
107+
108+
/* BKP_TPCS */
109+
#define BKP_TPCS_TER BIT(0) /*!< tamper event reset */
110+
#define BKP_TPCS_TIR BIT(1) /*!< tamper interrupt reset */
111+
#define BKP_TPCS_TPIE BIT(2) /*!< tamper interrupt enable */
112+
#define BKP_TPCS_TEF BIT(8) /*!< tamper event flag */
113+
#define BKP_TPCS_TIF BIT(9) /*!< tamper interrupt flag */
114+
115+
/* constants definitions */
116+
/* BKP register */
117+
#define BKP_DATA0_9(number) REG16((BKP) + 0x04U + (number) * 0x04U)
118+
#define BKP_DATA10_41(number) REG16((BKP) + 0x40U + ((number)-10U) * 0x04U)
119+
120+
/* get data of BKP data register */
121+
#define BKP_DATA_GET(regval) GET_BITS((uint32_t)(regval), 0, 15)
122+
123+
/* RTC clock calibration value */
124+
#define OCTL_RCCV(regval) (BITS(0,6) & ((uint32_t)(regval) << 0))
125+
126+
/* RTC output selection */
127+
#define RTC_OUTPUT_ALARM_PULSE ((uint16_t)0x0000U) /*!< RTC alarm pulse is selected as the RTC output */
128+
#define RTC_OUTPUT_SECOND_PULSE ((uint16_t)0x0200U) /*!< RTC second pulse is selected as the RTC output */
129+
130+
/* RTC clock output selection */
131+
#define RTC_CLOCK_DIV_64 ((uint16_t)0x0000U) /*!< RTC clock div 64 */
132+
#define RTC_CLOCK_DIV_1 ((uint16_t)0x4000U) /*!< RTC clock div 1 */
133+
134+
/* RTC clock calibration direction */
135+
#define RTC_CLOCK_SLOWED_DOWN ((uint16_t)0x0000U) /*!< RTC clock slow down */
136+
#define RTC_CLOCK_SPEED_UP ((uint16_t)0x8000U) /*!< RTC clock speed up */
137+
138+
/* tamper pin active level */
139+
#define TAMPER_PIN_ACTIVE_HIGH ((uint16_t)0x0000U) /*!< the tamper pin is active high */
140+
#define TAMPER_PIN_ACTIVE_LOW ((uint16_t)0x0002U) /*!< the tamper pin is active low */
141+
142+
/* tamper flag */
143+
#define BKP_FLAG_TAMPER BKP_TPCS_TEF /*!< tamper event flag */
144+
145+
/* tamper interrupt flag */
146+
#define BKP_INT_FLAG_TAMPER BKP_TPCS_TIF /*!< tamper interrupt flag */
147+
148+
/* BKP data register number */
149+
typedef enum
150+
{
151+
BKP_DATA_0 = 1, /*!< BKP data register 0 */
152+
BKP_DATA_1, /*!< BKP data register 1 */
153+
BKP_DATA_2, /*!< BKP data register 2 */
154+
BKP_DATA_3, /*!< BKP data register 3 */
155+
BKP_DATA_4, /*!< BKP data register 4 */
156+
BKP_DATA_5, /*!< BKP data register 5 */
157+
BKP_DATA_6, /*!< BKP data register 6 */
158+
BKP_DATA_7, /*!< BKP data register 7 */
159+
BKP_DATA_8, /*!< BKP data register 8 */
160+
BKP_DATA_9, /*!< BKP data register 9 */
161+
BKP_DATA_10, /*!< BKP data register 10 */
162+
BKP_DATA_11, /*!< BKP data register 11 */
163+
BKP_DATA_12, /*!< BKP data register 12 */
164+
BKP_DATA_13, /*!< BKP data register 13 */
165+
BKP_DATA_14, /*!< BKP data register 14 */
166+
BKP_DATA_15, /*!< BKP data register 15 */
167+
BKP_DATA_16, /*!< BKP data register 16 */
168+
BKP_DATA_17, /*!< BKP data register 17 */
169+
BKP_DATA_18, /*!< BKP data register 18 */
170+
BKP_DATA_19, /*!< BKP data register 19 */
171+
BKP_DATA_20, /*!< BKP data register 20 */
172+
BKP_DATA_21, /*!< BKP data register 21 */
173+
BKP_DATA_22, /*!< BKP data register 22 */
174+
BKP_DATA_23, /*!< BKP data register 23 */
175+
BKP_DATA_24, /*!< BKP data register 24 */
176+
BKP_DATA_25, /*!< BKP data register 25 */
177+
BKP_DATA_26, /*!< BKP data register 26 */
178+
BKP_DATA_27, /*!< BKP data register 27 */
179+
BKP_DATA_28, /*!< BKP data register 28 */
180+
BKP_DATA_29, /*!< BKP data register 29 */
181+
BKP_DATA_30, /*!< BKP data register 30 */
182+
BKP_DATA_31, /*!< BKP data register 31 */
183+
BKP_DATA_32, /*!< BKP data register 32 */
184+
BKP_DATA_33, /*!< BKP data register 33 */
185+
BKP_DATA_34, /*!< BKP data register 34 */
186+
BKP_DATA_35, /*!< BKP data register 35 */
187+
BKP_DATA_36, /*!< BKP data register 36 */
188+
BKP_DATA_37, /*!< BKP data register 37 */
189+
BKP_DATA_38, /*!< BKP data register 38 */
190+
BKP_DATA_39, /*!< BKP data register 39 */
191+
BKP_DATA_40, /*!< BKP data register 40 */
192+
BKP_DATA_41, /*!< BKP data register 41 */
193+
}bkp_data_register_enum;
194+
195+
/* function declarations */
196+
/* reset BKP registers */
197+
void bkp_deinit(void);
198+
/* write BKP data register */
199+
void bkp_write_data(bkp_data_register_enum register_number, uint16_t data);
200+
/* read BKP data register */
201+
uint16_t bkp_read_data(bkp_data_register_enum register_number);
202+
203+
/* RTC related functions */
204+
/* enable RTC clock calibration output */
205+
void bkp_rtc_calibration_output_enable(void);
206+
/* disable RTC clock calibration output */
207+
void bkp_rtc_calibration_output_disable(void);
208+
/* enable RTC alarm or second signal output */
209+
void bkp_rtc_signal_output_enable(void);
210+
/* disable RTC alarm or second signal output */
211+
void bkp_rtc_signal_output_disable(void);
212+
/* RTC output selection */
213+
void bkp_rtc_output_select(uint16_t outputsel);
214+
/* RTC clock output selection */
215+
void bkp_rtc_clock_output_select(uint16_t clocksel);
216+
/* RTC clock calibration direction */
217+
void bkp_rtc_clock_calibration_direction(uint16_t direction);
218+
/* set RTC clock calibration value */
219+
void bkp_rtc_calibration_value_set(uint8_t value);
220+
221+
/* tamper pin related functions */
222+
/* enable tamper pin detection */
223+
void bkp_tamper_detection_enable(void);
224+
/* disable tamper pin detection */
225+
void bkp_tamper_detection_disable(void);
226+
/* set tamper pin active level */
227+
void bkp_tamper_active_level_set(uint16_t level);
228+
/* enable tamper pin interrupt */
229+
void bkp_tamper_interrupt_enable(void);
230+
/* disable tamper pin interrupt */
231+
void bkp_tamper_interrupt_disable(void);
232+
233+
/* flag functions */
234+
/* get BKP flag state */
235+
FlagStatus bkp_flag_get(uint16_t flag);
236+
/* clear BKP flag state */
237+
void bkp_flag_clear(uint16_t flag);
238+
/* get BKP interrupt flag state */
239+
FlagStatus bkp_interrupt_flag_get(uint16_t flag);
240+
/* clear BKP interrupt flag state */
241+
void bkp_interrupt_flag_clear(uint16_t flag);
242+
243+
#endif /* GD32F30X_BKP_H */

0 commit comments

Comments
 (0)