Update WHD to 1.30.0

Author: cy-opm

targets/TARGET_Cypress/TARGET_PSOC6/TARGET_WHD/generated_mac_address.txt

@@ -6,4 +6,4 @@
  * MAC address is printed during WHD power up
  */
 
-#define NVRAM_GENERATED_MAC_ADDRESS        "macaddr=00:A0:50:45:2e:c8"
+#define NVRAM_GENERATED_MAC_ADDRESS        "macaddr=00:A0:50:8c:3c:1b"

targets/TARGET_Cypress/TARGET_PSOC6/TARGET_WHD/inc/whd_resource_api.h

@@ -86,14 +86,15 @@ struct whd_resource_source
      *
      *  @param whd_drv     Pointer to handle instance of the driver
      *  @param type        Type of resource - WHD_RESOURCE_WLAN_FIRMWARE, WHD_RESOURCE_WLAN_NVRAM, WHD_RESOURCE_WLAN_CLM
+     *  @param blockno     The number of block
      *  @param data        Pointer to a block of data
      *  @param size_out    Size of the resource
      *
      *  @return            WHD_SUCCESS or error code
      *
      */
-    uint32_t (*whd_get_resource_block)(whd_driver_t whd_drv, whd_resource_type_t type, const uint8_t **data,
-                                       uint32_t *size_out);
+    uint32_t (*whd_get_resource_block)(whd_driver_t whd_drv, whd_resource_type_t type,
+                                       uint32_t blockno, const uint8_t **data, uint32_t *size_out);
 
     /** Gets block count for the specified resource_type
      *

targets/TARGET_Cypress/TARGET_PSOC6/TARGET_WHD/inc/whd_types.h

@@ -22,6 +22,7 @@
 
 #include <stdint.h>
 #include "cy_result.h"
+#include "cyhal_hw_types.h"
 
 #ifndef INCLUDED_WHD_TYPES_H_
 #define INCLUDED_WHD_TYPES_H_
@@ -943,30 +944,25 @@ typedef struct
 } whd_wep_key_t;
 
 /**
- * Variant data type.
+ * Structure for Out-of-band interrupt config parameters which can be set by application during whd power up
  */
-typedef union whd_variant
+typedef struct whd_oob_config
 {
-    void *pvval;     /**< Void pointer */
-    uint32_t u32val; /**< uint32_t type variable */
-} whd_variant_t;
-
-/**
- * SDIO bus will use the host-wake out-of-band (OOB) signal.
- * @ref whd_get_intr_config_func_t must be specified when this flag is set.
- */
-#define WHD_BUS_SDIO_OOB_INTR (1UL << 0)
+    cyhal_gpio_t host_oob_pin;   /**< Host-side GPIO pin selection */
+    uint8_t dev_gpio_sel;        /**< WiFi device-side GPIO pin selection (must be zero) */
+    whd_bool_t is_falling_edge;  /**< Interrupt trigger (polarity) */
+    uint8_t intr_priority;       /**< OOB interrupt priority */
+} whd_oob_config_t;
 
 /**
  * Structure for SDIO config parameters which can be set by application during whd power up
  */
 typedef struct whd_sdio_config
 {
-    uint32_t flags;                   /**< Configuration flags (see WHD_BUS_SDIO_XXX constants). */
     /* Bus config */
     whd_bool_t sdio_1bit_mode;        /**< Default is false, means SDIO operates under 4 bit mode */
     whd_bool_t high_speed_sdio_clock; /**< Default is false, means SDIO operates in normal clock rate */
-    whd_variant_t oob_intr;           /**< Caller provided opaque data (@ref WHD_BUS_SDIO_OOB_INTR) */
+    whd_oob_config_t oob_config;      /**< Out-of-band interrupt configuration (required when bus can sleep) */
 } whd_sdio_config_t;
 
 /**
@@ -976,7 +972,7 @@ typedef struct whd_spi_config
 {
     /* Bus config */
     whd_bool_t is_spi_normal_mode; /**< Default is false */
-    whd_variant_t oob_intr;        /**< Caller provided opaque data */
+    whd_oob_config_t oob_config;   /**< Out-of-band interrupt configuration */
 } whd_spi_config_t;
 
 /**

targets/TARGET_Cypress/TARGET_PSOC6/TARGET_WHD/inc/whd_version.h

@@ -1,3 +1,3 @@
-#define WHD_VERSION "1b9fceb7"
+#define WHD_VERSION "v1.30.0-rc1-4-g9bd856ef-dirty"
 #define WHD_BRANCH "master"
-#define WHD_DATE "2019-07-03 16:07:52 +0530"
+#define WHD_DATE "2019-08-23 15:56:34 +0800"

targets/TARGET_Cypress/TARGET_PSOC6/TARGET_WHD/inc/whd_wifi_api.h

@@ -76,43 +76,33 @@ extern uint32_t whd_init(whd_driver_t *whd_driver_ptr, whd_init_config_t *whd_in
  *  @param  whd_driver         Pointer to handle instance of the driver
  *  @param  whd_config         Configuration for SDIO bus
  *  @param  sdio_obj           The SDHC hardware interface, from the Level 3 CY HW APIs
- *  @param  sdio_ops           Pointer to a whd_sdio_funcs_t to provide SDIO services to the driver instance
  *
  *  @return WHD_SUCCESS or Error code
  */
-extern uint32_t whd_bus_sdio_attach(whd_driver_t whd_driver, whd_sdio_config_t *whd_config, void *sdio_obj,
-                                    whd_sdio_funcs_t *sdio_ops);
+extern uint32_t whd_bus_sdio_attach(whd_driver_t whd_driver, whd_sdio_config_t *whd_config, cyhal_sdio_t *sdio_obj);
 
-/** Notify the WLAN device that the SDIO host-wake signal asserted.
+/** Detach the WLAN Device to a specific SDIO bus
  *
- * This function may be called after the WHD calls @ref whd_enable_intr_func_t with enable
- * set to WHD_TRUE.
- *
- *  @param  whd_driver        Pointer to handle instance of the driver
+ *  @param  whd_driver         Pointer to handle instance of the driver
  */
-extern void whd_bus_sdio_oob_intr_asserted(whd_driver_t whd_driver);
+extern void whd_bus_sdio_detach(whd_driver_t whd_driver);
 
 /** Attach the WLAN Device to a specific SPI bus
  *
  *  @param  whd_driver        Pointer to handle instance of the driver
  *  @param  whd_config        Configuration for SPI bus
  *  @param  spi_obj           The SPI hardware interface, from the Level 3 CY HW APIs
- *  @param  spi_ops           Pointer to a whd_spi_funcs_t to provide SPI services to the driver instance
  *
  *  @return WHD_SUCCESS or Error code
  */
-extern uint32_t whd_bus_spi_attach(whd_driver_t whd_driver, whd_spi_config_t *whd_config, void *spi_obj,
-                                   whd_spi_funcs_t *spi_ops);
+extern uint32_t whd_bus_spi_attach(whd_driver_t whd_driver, whd_spi_config_t *whd_config, cyhal_spi_t *spi_obj);
 
-/**
- * Notify the WLAN device that the SPI interrupt signal asserted.
+/** Detach the WLAN Device to a specific SPI bus
  *
- * This function may be called after the WHD calls @ref whd_enable_intr_func_t with enable
- * set to WHD_TRUE.
- *
- *  @param  whd_driver        Pointer to the handle instance of the driver associated to the event
+ *  @param  whd_driver         Pointer to handle instance of the driver
  */
-extern void whd_bus_spi_oob_intr_asserted(whd_driver_t whd_driver);
+extern void whd_bus_spi_detach(whd_driver_t whd_driver);
+
 /*  @} */
 
 /** @addtogroup wifi WHD Wi-Fi API
@@ -263,7 +253,7 @@ extern uint32_t whd_wifi_scan(whd_interface_t ifp,
                               const uint16_t *optional_channel_list,
                               const whd_scan_extended_params_t *optional_extended_params,
                               whd_scan_result_callback_t callback,
-                              whd_scan_result_t **result_ptr,
+                              whd_scan_result_t *result_ptr,
                               void *user_data);
 
 /** Abort a previously issued scan