Skip to content

Commit b1a284a

Browse files
jeromecoutantjeromecoutant
committed
STM32: astyle check
1 parent 7addb80 commit b1a284a

File tree

18 files changed

+163
-180
lines changed

18 files changed

+163
-180
lines changed

‎targets/TARGET_STM/TARGET_STM32H7/TARGET_STM32H743xI/TARGET_NUCLEO_H743ZI/PeripheralNames.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -75,7 +75,7 @@ typedef enum {
7575
} I2CName;
7676

7777
typedef enum {
78-
PWM_I = (int)HRTIM1_BASE,
78+
PWM_I = (int)HRTIM1_BASE,
7979
PWM_1 = (int)TIM1_BASE,
8080
PWM_2 = (int)TIM2_BASE,
8181
PWM_3 = (int)TIM3_BASE,

‎targets/TARGET_STM/TARGET_STM32H7/TARGET_STM32H743xI/TARGET_NUCLEO_H743ZI/PeripheralPins.c

Lines changed: 6 additions & 6 deletions
Original file line numberDiff line numberDiff line change
@@ -251,13 +251,13 @@ MBED_WEAK const PinMap PinMap_UART_TX[] = {
251251
{PA_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
252252
{PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to RMII_MDIO
253253
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_VBUS
254-
{PA_9_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_VBUS
254+
{PA_9_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_VBUS
255255
{PA_12, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)}, // Connected to USB_DP
256256
{PA_15, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
257257
{PB_4, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)},
258258
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
259259
{PB_6_ALT0, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
260-
{PB_6_ALT1, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
260+
{PB_6_ALT1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)},
261261
{PB_9, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
262262
{PB_10, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
263263
{PB_13, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)}, // Connected to RMII_TXD1
@@ -281,12 +281,12 @@ MBED_WEAK const PinMap PinMap_UART_RX[] = {
281281
{PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
282282
{PA_8, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)}, // Connected to USB_SOF [TP1]
283283
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_ID
284-
{PA_10_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_ID
284+
{PA_10_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_ID
285285
{PA_11, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_UART4)}, // Connected to USB_DM
286286
{PB_3, UART_7, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_UART7)}, // Connected to SWO
287287
{PB_5, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
288288
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to LD2 [Blue]
289-
{PB_7_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)}, // Connected to LD2 [Blue]
289+
{PB_7_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART)}, // Connected to LD2 [Blue]
290290
{PB_8, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
291291
{PB_11, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
292292
{PB_12, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_UART5)},
@@ -308,7 +308,7 @@ MBED_WEAK const PinMap PinMap_UART_RX[] = {
308308
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
309309
{PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to RMII_REF_CLK
310310
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // Connected to USB_DP
311-
{PA_12_ALT0, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_DP
311+
{PA_12_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_DP
312312
{PA_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
313313
{PB_14, UART_3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // Connected to LD3 [Red]
314314
{PB_14_ALT0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // Connected to LD3 [Red]
@@ -324,7 +324,7 @@ MBED_WEAK const PinMap PinMap_UART_RTS[] = {
324324
};
325325

326326
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
327-
{PA_11, LPUART_1,STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_DM
327+
{PA_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_LPUART)}, // Connected to USB_DM
328328
{PB_0, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
329329
{PB_15, UART_4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
330330
{PC_9, UART_5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},

‎targets/TARGET_STM/TARGET_STM32H7/TARGET_STM32H743xI/TARGET_NUCLEO_H743ZI/PinNames.h

Lines changed: 4 additions & 4 deletions
Original file line numberDiff line numberDiff line change
@@ -291,7 +291,7 @@ typedef enum {
291291
SPI_CS = D10,
292292
PWM_OUT = D9,
293293

294-
/**** USB pins ****/
294+
/**** USB pins ****/
295295
USB_OTG_FS_DM = PA_11,
296296
USB_OTG_FS_DP = PA_12,
297297
USB_OTG_FS_ID = PA_10,
@@ -315,7 +315,7 @@ typedef enum {
315315
USB_OTG_HS_ULPI_STP = PC_0,
316316
USB_OTG_HS_VBUS = PB_13,
317317

318-
/**** ETHERNET pins ****/
318+
/**** ETHERNET pins ****/
319319
ETH_COL = PA_3,
320320
ETH_CRS = PA_0,
321321
ETH_CRS_DV = PA_7,
@@ -345,13 +345,13 @@ typedef enum {
345345
ETH_TX_ER = PB_2,
346346
ETH_TX_ER_ALT0 = PA_9,
347347

348-
/**** OSCILLATOR pins ****/
348+
/**** OSCILLATOR pins ****/
349349
RCC_OSC32_IN = PC_14,
350350
RCC_OSC32_OUT = PC_15,
351351
RCC_OSC_IN = PH_0,
352352
RCC_OSC_OUT = PH_1,
353353

354-
/**** DEBUG pins ****/
354+
/**** DEBUG pins ****/
355355
SYS_JTCK_SWCLK = PA_14,
356356
SYS_JTDI = PA_15,
357357
SYS_JTDO_SWO = PB_3,

‎targets/TARGET_STM/TARGET_STM32H7/TARGET_STM32H743xI/TARGET_NUCLEO_H743ZI/system_clock.c

Lines changed: 8 additions & 9 deletions
Original file line numberDiff line numberDiff line change
@@ -102,11 +102,11 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
102102

103103
/*!< Supply configuration update enable */
104104
// HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
105-
/* The voltage scaling allows optimizing the power consumption when the device is
106-
clocked below the maximum system frequency, to update the voltage scaling value
105+
/* The voltage scaling allows optimizing the power consumption when the device is
106+
clocked below the maximum system frequency, to update the voltage scaling value
107107
regarding system frequency refer to product datasheet. */
108108
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
109-
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
109+
while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
110110

111111
// NEEDED ???
112112
/* Select CSI as system clock source to allow modification of the PLL configuration */
@@ -121,8 +121,7 @@ uint8_t SetSysClock_PLL_HSE(uint8_t bypass)
121121
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI48;
122122
if (bypass) {
123123
RCC_OscInitStruct.HSEState = RCC_HSE_BYPASS;
124-
}
125-
else {
124+
} else {
126125
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
127126
}
128127
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
@@ -190,11 +189,11 @@ uint8_t SetSysClock_PLL_HSI(void)
190189

191190
/*!< Supply configuration update enable */
192191
HAL_PWREx_ConfigSupply(PWR_LDO_SUPPLY);
193-
/* The voltage scaling allows optimizing the power consumption when the device is
194-
clocked below the maximum system frequency, to update the voltage scaling value
192+
/* The voltage scaling allows optimizing the power consumption when the device is
193+
clocked below the maximum system frequency, to update the voltage scaling value
195194
regarding system frequency refer to product datasheet. */
196195
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
197-
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
196+
while (!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
198197

199198
// Enable HSI oscillator and activate PLL with HSI as source
200199
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_CSI;
@@ -216,7 +215,7 @@ uint8_t SetSysClock_PLL_HSI(void)
216215

217216
/* Select PLL as system clock source and configure bus clocks dividers */
218217
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_D1PCLK1 | RCC_CLOCKTYPE_PCLK1 | \
219-
RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1);
218+
RCC_CLOCKTYPE_PCLK2 | RCC_CLOCKTYPE_D3PCLK1);
220219
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
221220
RCC_ClkInitStruct.SYSCLKDivider = RCC_SYSCLK_DIV1;
222221
RCC_ClkInitStruct.AHBCLKDivider = RCC_HCLK_DIV2;

‎targets/TARGET_STM/TARGET_STM32H7/analogout_device.c

Lines changed: 5 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -35,7 +35,8 @@
3535
#include "stm32h7xx_hal.h"
3636
#include "PeripheralPins.h"
3737

38-
void analogout_init(dac_t *obj, PinName pin) {
38+
void analogout_init(dac_t *obj, PinName pin)
39+
{
3940
DAC_ChannelConfTypeDef sConfig = {0};
4041

4142
// Get the peripheral name (DAC_1, ...) from the pin and assign it to the object
@@ -73,7 +74,7 @@ void analogout_init(dac_t *obj, PinName pin) {
7374
obj->handle.Instance = DAC1;
7475
obj->handle.State = HAL_DAC_STATE_RESET;
7576

76-
if (HAL_DAC_Init(&obj->handle) != HAL_OK ) {
77+
if (HAL_DAC_Init(&obj->handle) != HAL_OK) {
7778
error("HAL_DAC_Init failed");
7879
}
7980

@@ -87,7 +88,8 @@ void analogout_init(dac_t *obj, PinName pin) {
8788
analogout_write_u16(obj, 0);
8889
}
8990

90-
void analogout_free(dac_t *obj) {
91+
void analogout_free(dac_t *obj)
92+
{
9193
}
9294

9395

‎targets/TARGET_STM/TARGET_STM32H7/common_objects.h

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -80,7 +80,7 @@ struct serial_s {
8080
PinName pin_rts;
8181
PinName pin_cts;
8282
#endif
83-
};
83+
};
8484

8585
struct i2c_s {
8686
/* The 1st 2 members I2CName i2c

‎targets/TARGET_STM/TARGET_STM32H7/flash_api.c

Lines changed: 30 additions & 46 deletions
Original file line numberDiff line numberDiff line change
@@ -85,8 +85,7 @@ int32_t flash_erase_sector(flash_t *obj, uint32_t address)
8585
if (HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK) {
8686
status = -1;
8787
}
88-
}
89-
else {
88+
} else {
9089
EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS;
9190
EraseInitStruct.Banks = FLASH_BANK_2;
9291
if (HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK) {
@@ -100,7 +99,7 @@ int32_t flash_erase_sector(flash_t *obj, uint32_t address)
10099
}
101100

102101
int32_t flash_program_page(flash_t *obj, uint32_t address, const uint8_t *data,
103-
uint32_t size)
102+
uint32_t size)
104103
{
105104
uint32_t StartAddress = 0;
106105
int32_t status = 0;
@@ -163,49 +162,34 @@ uint32_t flash_get_size(const flash_t *obj)
163162
*/
164163
static uint32_t GetSector(uint32_t Address)
165164
{
166-
uint32_t sector = 0;
167-
168-
if(((Address < ADDR_FLASH_SECTOR_1_BANK1) && (Address >= ADDR_FLASH_SECTOR_0_BANK1)) || \
169-
((Address < ADDR_FLASH_SECTOR_1_BANK2) && (Address >= ADDR_FLASH_SECTOR_0_BANK2)))
170-
{
171-
sector = FLASH_SECTOR_0;
172-
}
173-
else if(((Address < ADDR_FLASH_SECTOR_2_BANK1) && (Address >= ADDR_FLASH_SECTOR_1_BANK1)) || \
174-
((Address < ADDR_FLASH_SECTOR_2_BANK2) && (Address >= ADDR_FLASH_SECTOR_1_BANK2)))
175-
{
176-
sector = FLASH_SECTOR_1;
177-
}
178-
else if(((Address < ADDR_FLASH_SECTOR_3_BANK1) && (Address >= ADDR_FLASH_SECTOR_2_BANK1)) || \
179-
((Address < ADDR_FLASH_SECTOR_3_BANK2) && (Address >= ADDR_FLASH_SECTOR_2_BANK2)))
180-
{
181-
sector = FLASH_SECTOR_2;
182-
}
183-
else if(((Address < ADDR_FLASH_SECTOR_4_BANK1) && (Address >= ADDR_FLASH_SECTOR_3_BANK1)) || \
184-
((Address < ADDR_FLASH_SECTOR_4_BANK2) && (Address >= ADDR_FLASH_SECTOR_3_BANK2)))
185-
{
186-
sector = FLASH_SECTOR_3;
187-
}
188-
else if(((Address < ADDR_FLASH_SECTOR_5_BANK1) && (Address >= ADDR_FLASH_SECTOR_4_BANK1)) || \
189-
((Address < ADDR_FLASH_SECTOR_5_BANK2) && (Address >= ADDR_FLASH_SECTOR_4_BANK2)))
190-
{
191-
sector = FLASH_SECTOR_4;
192-
}
193-
else if(((Address < ADDR_FLASH_SECTOR_6_BANK1) && (Address >= ADDR_FLASH_SECTOR_5_BANK1)) || \
194-
((Address < ADDR_FLASH_SECTOR_6_BANK2) && (Address >= ADDR_FLASH_SECTOR_5_BANK2)))
195-
{
196-
sector = FLASH_SECTOR_5;
197-
}
198-
else if(((Address < ADDR_FLASH_SECTOR_7_BANK1) && (Address >= ADDR_FLASH_SECTOR_6_BANK1)) || \
199-
((Address < ADDR_FLASH_SECTOR_7_BANK2) && (Address >= ADDR_FLASH_SECTOR_6_BANK2)))
200-
{
201-
sector = FLASH_SECTOR_6;
202-
}
203-
else
204-
{
205-
sector = FLASH_SECTOR_7;
206-
}
207-
208-
return sector;
165+
uint32_t sector = 0;
166+
167+
if (((Address < ADDR_FLASH_SECTOR_1_BANK1) && (Address >= ADDR_FLASH_SECTOR_0_BANK1)) || \
168+
((Address < ADDR_FLASH_SECTOR_1_BANK2) && (Address >= ADDR_FLASH_SECTOR_0_BANK2))) {
169+
sector = FLASH_SECTOR_0;
170+
} else if (((Address < ADDR_FLASH_SECTOR_2_BANK1) && (Address >= ADDR_FLASH_SECTOR_1_BANK1)) || \
171+
((Address < ADDR_FLASH_SECTOR_2_BANK2) && (Address >= ADDR_FLASH_SECTOR_1_BANK2))) {
172+
sector = FLASH_SECTOR_1;
173+
} else if (((Address < ADDR_FLASH_SECTOR_3_BANK1) && (Address >= ADDR_FLASH_SECTOR_2_BANK1)) || \
174+
((Address < ADDR_FLASH_SECTOR_3_BANK2) && (Address >= ADDR_FLASH_SECTOR_2_BANK2))) {
175+
sector = FLASH_SECTOR_2;
176+
} else if (((Address < ADDR_FLASH_SECTOR_4_BANK1) && (Address >= ADDR_FLASH_SECTOR_3_BANK1)) || \
177+
((Address < ADDR_FLASH_SECTOR_4_BANK2) && (Address >= ADDR_FLASH_SECTOR_3_BANK2))) {
178+
sector = FLASH_SECTOR_3;
179+
} else if (((Address < ADDR_FLASH_SECTOR_5_BANK1) && (Address >= ADDR_FLASH_SECTOR_4_BANK1)) || \
180+
((Address < ADDR_FLASH_SECTOR_5_BANK2) && (Address >= ADDR_FLASH_SECTOR_4_BANK2))) {
181+
sector = FLASH_SECTOR_4;
182+
} else if (((Address < ADDR_FLASH_SECTOR_6_BANK1) && (Address >= ADDR_FLASH_SECTOR_5_BANK1)) || \
183+
((Address < ADDR_FLASH_SECTOR_6_BANK2) && (Address >= ADDR_FLASH_SECTOR_5_BANK2))) {
184+
sector = FLASH_SECTOR_5;
185+
} else if (((Address < ADDR_FLASH_SECTOR_7_BANK1) && (Address >= ADDR_FLASH_SECTOR_6_BANK1)) || \
186+
((Address < ADDR_FLASH_SECTOR_7_BANK2) && (Address >= ADDR_FLASH_SECTOR_6_BANK2))) {
187+
sector = FLASH_SECTOR_6;
188+
} else {
189+
sector = FLASH_SECTOR_7;
190+
}
191+
192+
return sector;
209193
}
210194

211195
/**

‎targets/TARGET_STM/TARGET_STM32H7/pin_device.h

Lines changed: 4 additions & 3 deletions
Original file line numberDiff line numberDiff line change
@@ -56,14 +56,15 @@ static inline void stm_pin_PullConfig(GPIO_TypeDef *gpio, uint32_t ll_pin, uint3
5656
}
5757
}
5858

59-
static inline void stm_pin_SetAFPin( GPIO_TypeDef *gpio, PinName pin, uint32_t afnum)
59+
static inline void stm_pin_SetAFPin(GPIO_TypeDef *gpio, PinName pin, uint32_t afnum)
6060
{
6161
uint32_t ll_pin = ll_pin_defines[STM_PIN(pin)];
6262

63-
if (STM_PIN(pin) > 7)
63+
if (STM_PIN(pin) > 7) {
6464
LL_GPIO_SetAFPin_8_15(gpio, ll_pin, afnum);
65-
else
65+
} else {
6666
LL_GPIO_SetAFPin_0_7(gpio, ll_pin, afnum);
67+
}
6768
}
6869

6970
#endif

‎targets/TARGET_STM/TARGET_STM32H7/pwmout_device.c

Lines changed: 1 addition & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -33,8 +33,7 @@
3333

3434
#ifdef DEVICE_PWMOUT
3535

36-
const pwm_apb_map_t pwm_apb_map_table[] =
37-
{
36+
const pwm_apb_map_t pwm_apb_map_table[] = {
3837
#if defined(TIM2_BASE)
3938
{PWM_2, PWMOUT_ON_APB1},
4039
#endif

0 commit comments

Comments
 (0)