ublox eva nina - fix line endings

Fixes #3346

Author: 0xc0170

targets/TARGET_NORDIC/TARGET_NRF5/TARGET_MCU_NRF52832/TARGET_UBLOX_EVA_NINA/PinNames.h

@@ -1,106 +1,106 @@
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-#define PORT_SHIFT 3
-
-typedef enum {
-    // nRF52 pin names
-    p0  = 0,
-    p1  = 1,
-    p2  = 2,
-    p3  = 3,
-    p4  = 4,
-    p5  = 5,
-    p6  = 6,
-    p7  = 7,
-    p8  = 8,
-    p9  = 9,
-    p10 = 10,
-    p11 = 11,
-    p12 = 12,
-    p13 = 13,
-    p14 = 14,
-    p15 = 15,
-    p16 = 16,
-    p17 = 17,
-    p18 = 18,
-    p19 = 19,
-    p20 = 20,
-    p21 = 21,
-    p22 = 22,
-    p23 = 23,
-    p24 = 24,
-    p25 = 25,
-    p26 = 26,
-    p27 = 27,
-    p28 = 28,
-    p29 = 29,
-    p30 = 30,
-    p31 = 31,
-    NC = (int)0xFFFFFFFF, // Not connected
-
-    //NINA-B1 module pin names
-    NINA_B1_GPIO_1 = p8,
-    NINA_B1_GPIO_2 = p11,
-    NINA_B1_GPIO_3 = p12,
-    NINA_B1_GPIO_4 = p13,
-    NINA_B1_GPIO_5 = p14,
-    NINA_B1_GPIO_7 = p16,
-    NINA_B1_GPIO_8 = p18,
-
-    NINA_B1_GPIO_16 = p28,
-    NINA_B1_GPIO_17 = p29,
-    NINA_B1_GPIO_18 = p30,
-
-    NINA_B1_GPIO_20 = p31,
-    NINA_B1_GPIO_21 = p7,
-    NINA_B1_GPIO_22 = p6,
-    NINA_B1_GPIO_23 = p5,
-    NINA_B1_GPIO_24 = p2,
-    NINA_B1_GPIO_25 = p3,
-    NINA_B1_GPIO_27 = p4,
-    NINA_B1_GPIO_28 = p9,
-    NINA_B1_GPIO_29 = p10,
-    
-    // Board pins
-    LED1 = NINA_B1_GPIO_7, // ORANGE
-    LED2 = NC,
-    LED3 = NC,
-    LED4 = NC,
-    
-    // Nordic SDK pin names
-    RX_PIN_NUMBER = p5,
-    TX_PIN_NUMBER = p6,
-    CTS_PIN_NUMBER = p7,
-    RTS_PIN_NUMBER = p31,
-    I2C_SDA0 = p2,
-    I2C_SCL0 = p3,
-
-    // mBed interface pins
-    USBTX = TX_PIN_NUMBER,
-    USBRX = RX_PIN_NUMBER
-} PinName;
-
-typedef enum {
-    PullNone = 0,
-    PullDown = 1,
-    PullUp = 3,
-    PullDefault = PullUp
-} PinMode;
-
-#ifdef __cplusplus
-}
-
-#endif
-#endif
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT 3
+
+typedef enum {
+    // nRF52 pin names
+    p0  = 0,
+    p1  = 1,
+    p2  = 2,
+    p3  = 3,
+    p4  = 4,
+    p5  = 5,
+    p6  = 6,
+    p7  = 7,
+    p8  = 8,
+    p9  = 9,
+    p10 = 10,
+    p11 = 11,
+    p12 = 12,
+    p13 = 13,
+    p14 = 14,
+    p15 = 15,
+    p16 = 16,
+    p17 = 17,
+    p18 = 18,
+    p19 = 19,
+    p20 = 20,
+    p21 = 21,
+    p22 = 22,
+    p23 = 23,
+    p24 = 24,
+    p25 = 25,
+    p26 = 26,
+    p27 = 27,
+    p28 = 28,
+    p29 = 29,
+    p30 = 30,
+    p31 = 31,
+    NC = (int)0xFFFFFFFF, // Not connected
+
+    //NINA-B1 module pin names
+    NINA_B1_GPIO_1 = p8,
+    NINA_B1_GPIO_2 = p11,
+    NINA_B1_GPIO_3 = p12,
+    NINA_B1_GPIO_4 = p13,
+    NINA_B1_GPIO_5 = p14,
+    NINA_B1_GPIO_7 = p16,
+    NINA_B1_GPIO_8 = p18,
+
+    NINA_B1_GPIO_16 = p28,
+    NINA_B1_GPIO_17 = p29,
+    NINA_B1_GPIO_18 = p30,
+
+    NINA_B1_GPIO_20 = p31,
+    NINA_B1_GPIO_21 = p7,
+    NINA_B1_GPIO_22 = p6,
+    NINA_B1_GPIO_23 = p5,
+    NINA_B1_GPIO_24 = p2,
+    NINA_B1_GPIO_25 = p3,
+    NINA_B1_GPIO_27 = p4,
+    NINA_B1_GPIO_28 = p9,
+    NINA_B1_GPIO_29 = p10,
+    
+    // Board pins
+    LED1 = NINA_B1_GPIO_7, // ORANGE
+    LED2 = NC,
+    LED3 = NC,
+    LED4 = NC,
+    
+    // Nordic SDK pin names
+    RX_PIN_NUMBER = p5,
+    TX_PIN_NUMBER = p6,
+    CTS_PIN_NUMBER = p7,
+    RTS_PIN_NUMBER = p31,
+    I2C_SDA0 = p2,
+    I2C_SCL0 = p3,
+
+    // mBed interface pins
+    USBTX = TX_PIN_NUMBER,
+    USBRX = RX_PIN_NUMBER
+} PinName;
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp = 3,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+
+#endif
+#endif