[IOTSTOR-990] SPIFBlockDevice doesn't play nice on shared SPI bus. Back to use select and deselect, use correct spi constructor

Author: Marcin Tomczyk

components/storage/blockdevice/COMPONENT_DATAFLASH/DataFlashBlockDevice.cpp

@@ -140,7 +140,7 @@ DataFlashBlockDevice::DataFlashBlockDevice(PinName mosi,
                                            PinName cs,
                                            int freq,
                                            PinName nwp)
-    :   _spi(mosi, miso, sclk, cs),
+    :   _spi(mosi, miso, sclk, cs, use_gpio_ssel),
         _nwp(nwp),
         _device_size(0),
         _page_size(0),
@@ -330,6 +330,8 @@ int DataFlashBlockDevice::read(void *buffer, bd_addr_t addr, bd_size_t size)
 
         uint8_t *external_buffer = static_cast<uint8_t *>(buffer);
 
+        _spi.select();
+
         /* send read opcode */
         _spi.write(DATAFLASH_OP_READ_LOW_FREQUENCY);
 
@@ -348,6 +350,8 @@ int DataFlashBlockDevice::read(void *buffer, bd_addr_t addr, bd_size_t size)
             external_buffer[index] = _spi.write(DATAFLASH_OP_NOP);
         }
 
+        _spi.deselect();
+
         result = BD_ERROR_OK;
     }
 
@@ -539,13 +543,17 @@ uint16_t DataFlashBlockDevice::_get_register(uint8_t opcode)
     _mutex.lock();
     DEBUG_PRINTF("_get_register: %" PRIX8 "\r\n", opcode);
 
+    _spi.select();
+
     /* write opcode */
     _spi.write(opcode);
 
     /* read and store result */
     int status = (_spi.write(DATAFLASH_OP_NOP));
     status = (status << 8) | (_spi.write(DATAFLASH_OP_NOP));
 
+    _spi.deselect()''
+
     _mutex.unlock();
     return status;
 }
@@ -566,6 +574,8 @@ void DataFlashBlockDevice::_write_command(uint32_t command, const uint8_t *buffe
 {
     DEBUG_PRINTF("_write_command: %" PRIX32 " %p %" PRIX32 "\r\n", command, buffer, size);
 
+    _spi.select();
+
     /* send command (opcode with data or 4 byte command) */
     _spi.write((command >> 24) & 0xFF);
     _spi.write((command >> 16) & 0xFF);
@@ -578,6 +588,8 @@ void DataFlashBlockDevice::_write_command(uint32_t command, const uint8_t *buffe
             _spi.write(buffer[index]);
         }
     }
+
+    _spi.deselect();
 }
 
 /**

components/storage/blockdevice/COMPONENT_SD/SDBlockDevice.cpp

@@ -252,11 +252,11 @@ const uint32_t SDBlockDevice::_block_size = BLOCK_SIZE_HC;
 
 #if MBED_CONF_SD_CRC_ENABLED
 SDBlockDevice::SDBlockDevice(PinName mosi, PinName miso, PinName sclk, PinName cs, uint64_t hz, bool crc_on)
-    : _sectors(0), _spi(mosi, miso, sclk, cs), _is_initialized(0),
+    : _sectors(0), _spi(mosi, miso, sclk, cs, use_gpio_ssel), _is_initialized(0),
       _init_ref_count(0), _crc_on(crc_on)
 #else
 SDBlockDevice::SDBlockDevice(PinName mosi, PinName miso, PinName sclk, PinName cs, uint64_t hz, bool crc_on)
-    : _sectors(0), _spi(mosi, miso, sclk, cs), _is_initialized(0),
+    : _sectors(0), _spi(mosi, miso, sclk, cs, use_gpio_ssel), _is_initialized(0),
       _init_ref_count(0)
 #endif
 {
@@ -538,7 +538,7 @@ int SDBlockDevice::program(const void *b, bd_addr_t addr, bd_size_t size)
         _spi.write(SPI_STOP_TRAN);
     }
 
-    _deselect();
+    _spi.deselect();
     unlock();
     return status;
 }
@@ -585,7 +585,7 @@ int SDBlockDevice::read(void *b, bd_addr_t addr, bd_size_t size)
         buffer += _block_size;
         --blockCnt;
     }
-    _deselect();
+    _spi.deselect();
 
     // Send CMD12(0x00000000) to stop the transmission for multi-block transfer
     if (size > _block_size) {
@@ -753,7 +753,7 @@ int SDBlockDevice::_cmd(SDBlockDevice::cmdSupported cmd, uint32_t arg, bool isAc
 
     // Select card and wait for card to be ready before sending next command
     // Note: next command will fail if card is not ready
-    _select();
+    _spi.select();
 
     // No need to wait for card to be ready when sending the stop command
     if (CMD12_STOP_TRANSMISSION != cmd) {
@@ -789,17 +789,17 @@ int SDBlockDevice::_cmd(SDBlockDevice::cmdSupported cmd, uint32_t arg, bool isAc
 
     // Process the response R1  : Exit on CRC/Illegal command error/No response
     if (R1_NO_RESPONSE == response) {
-        _deselect();
+        _spi.deselect();
         debug_if(SD_DBG, "No response CMD:%d response: 0x%" PRIx32 "\n", cmd, response);
         return SD_BLOCK_DEVICE_ERROR_NO_DEVICE;         // No device
     }
     if (response & R1_COM_CRC_ERROR) {
-        _deselect();
+        _spi.deselect();
         debug_if(SD_DBG, "CRC error CMD:%d response 0x%" PRIx32 "\n", cmd, response);
         return SD_BLOCK_DEVICE_ERROR_CRC;                // CRC error
     }
     if (response & R1_ILLEGAL_COMMAND) {
-        _deselect();
+        _spi.deselect();
         debug_if(SD_DBG, "Illegal command CMD:%d response 0x%" PRIx32 "\n", cmd, response);
         if (CMD8_SEND_IF_COND == cmd) {                  // Illegal command is for Ver1 or not SD Card
             _card_type = CARD_UNKNOWN;
@@ -857,7 +857,7 @@ int SDBlockDevice::_cmd(SDBlockDevice::cmdSupported cmd, uint32_t arg, bool isAc
         return BD_ERROR_OK;
     }
     // Deselect card
-    _deselect();
+    _spi.deselect();
     return status;
 }
 
@@ -908,7 +908,7 @@ int SDBlockDevice::_read_bytes(uint8_t *buffer, uint32_t length)
     // read until start byte (0xFE)
     if (false == _wait_token(SPI_START_BLOCK)) {
         debug_if(SD_DBG, "Read timeout\n");
-        _deselect();
+        _spi.deselect();
         return SD_BLOCK_DEVICE_ERROR_NO_RESPONSE;
     }
 
@@ -930,13 +930,13 @@ int SDBlockDevice::_read_bytes(uint8_t *buffer, uint32_t length)
         if (crc_result != crc) {
             debug_if(SD_DBG, "_read_bytes: Invalid CRC received 0x%" PRIx16 " result of computation 0x%" PRIx32 "\n",
                      crc, crc_result);
-            _deselect();
+            _spi.deselect();
             return SD_BLOCK_DEVICE_ERROR_CRC;
         }
     }
 #endif
 
-    _deselect();
+    _spi.deselect();
     return 0;
 }
 
@@ -1129,22 +1129,14 @@ void SDBlockDevice::_spi_wait(uint8_t count)
 
 void SDBlockDevice::_spi_init()
 {
+    _spi.select();
     // Set to SCK for initialization, and clock card with cs = 1
     _spi.frequency(_init_sck);
     _spi.format(8, 0);
     _spi.set_default_write_value(SPI_FILL_CHAR);
     // Initial 74 cycles required for few cards, before selecting SPI mode
     _spi_wait(10);
-}
-
-void SDBlockDevice::_select()
-{
-    _spi.write(SPI_FILL_CHAR);
-}
-
-void SDBlockDevice::_deselect()
-{
-    _spi.write(SPI_FILL_CHAR);
+    _spi.deselect();
 }
 
 #endif  /* DEVICE_SPI */

components/storage/blockdevice/COMPONENT_SD/SDBlockDevice.h

@@ -273,10 +273,6 @@ class SDBlockDevice : public mbed::BlockDevice {
     uint8_t _write(const uint8_t *buffer, uint8_t token, uint32_t length);
     int _freq(void);
 
-    /* Chip Select and SPI mode select */
-    void _select();
-    void _deselect();
-
     virtual void lock()
     {
         _mutex.lock();

components/storage/blockdevice/COMPONENT_SPIF/SPIFBlockDevice.cpp

@@ -87,7 +87,7 @@ SingletonPtr<PlatformMutex> SPIFBlockDevice::_mutex;
 //***********************
 SPIFBlockDevice::SPIFBlockDevice(PinName mosi, PinName miso, PinName sclk, PinName csel, int freq)
     :
-    _spi(mosi, miso, sclk, csel), _prog_instruction(0), _erase_instruction(0),
+    _spi(mosi, miso, sclk, csel, use_gpio_ssel), _prog_instruction(0), _erase_instruction(0),
     _page_size_bytes(0), _init_ref_count(0), _is_initialized(false)
 {
     _address_size = SPIF_ADDR_SIZE_3_BYTES;
@@ -470,6 +470,8 @@ spif_bd_error SPIFBlockDevice::_spi_send_read_command(int read_inst, uint8_t *bu
     uint32_t dummy_bytes = _dummy_and_mode_cycles / 8;
     int dummy_byte = 0;
 
+    _spi.select();
+
     // Write 1 byte Instruction
     _spi.write(read_inst);
 
@@ -488,6 +490,8 @@ spif_bd_error SPIFBlockDevice::_spi_send_read_command(int read_inst, uint8_t *bu
         buffer[i] = _spi.write(0);
     }
 
+    _spi.deselect();
+
     return SPIF_BD_ERROR_OK;
 }
 
@@ -514,6 +518,8 @@ spif_bd_error SPIFBlockDevice::_spi_send_program_command(int prog_inst, const vo
     int dummy_byte = 0;
     uint8_t *data = (uint8_t *)buffer;
 
+    _spi.select();
+
     // Write 1 byte Instruction
     _spi.write(prog_inst);
 
@@ -532,6 +538,8 @@ spif_bd_error SPIFBlockDevice::_spi_send_program_command(int prog_inst, const vo
         _spi.write(data[i]);
     }
 
+    _spi.deselect();
+
     return SPIF_BD_ERROR_OK;
 }
 
@@ -550,6 +558,8 @@ spif_bd_error SPIFBlockDevice::_spi_send_general_command(int instruction, bd_add
     uint32_t dummy_bytes = _dummy_and_mode_cycles / 8;
     uint8_t dummy_byte = 0x00;
 
+    _spi.select();
+
     // Write 1 byte Instruction
     _spi.write(instruction);
 
@@ -569,6 +579,8 @@ spif_bd_error SPIFBlockDevice::_spi_send_general_command(int instruction, bd_add
     // Read/Write Data
     _spi.write(tx_buffer, (int)tx_length, rx_buffer, (int)rx_length);
 
+    _spi.deselect();
+
     return SPIF_BD_ERROR_OK;
 }