Skip to content

Commit ca021fc

Browse files
JeanMarcRJeanMarcR
committed
STM32WL : ADDING NUCLEO STM32WL55JC SUPPORT
Add code concerning all STM32WL55JC platforms - system clock, pin and peripheral definition mbedtools make file
1 parent 347ada5 commit ca021fc

File tree

5 files changed

+562
-0
lines changed

5 files changed

+562
-0
lines changed

‎targets/TARGET_STM/TARGET_STM32WL/TARGET_STM32WL55xC/TARGET_NUCLEO_WL55JC/CMakeLists.txt

Lines changed: 13 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,13 @@
1+
# Copyright (c) 2020 ARM Limited. All rights reserved.
2+
# SPDX-License-Identifier: Apache-2.0
3+
4+
target_sources(mbed-core
5+
INTERFACE
6+
PeripheralPins.c
7+
system_clock.c
8+
)
9+
10+
target_include_directories(mbed-core
11+
INTERFACE
12+
.
13+
)

‎targets/TARGET_STM/TARGET_STM32WL/TARGET_STM32WL55xC/TARGET_NUCLEO_WL55JC/PeripheralNames.h

Lines changed: 66 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,66 @@
1+
/* mbed Microcontroller Library
2+
* Copyright (c) 2019 ARM Limited
3+
* SPDX-License-Identifier: Apache-2.0
4+
*
5+
* Licensed under the Apache License, Version 2.0 (the "License");
6+
* you may not use this file except in compliance with the License.
7+
* You may obtain a copy of the License at
8+
*
9+
* http://www.apache.org/licenses/LICENSE-2.0
10+
*
11+
* Unless required by applicable law or agreed to in writing, software
12+
* distributed under the License is distributed on an "AS IS" BASIS,
13+
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
14+
* See the License for the specific language governing permissions and
15+
* limitations under the License.
16+
*/
17+
#ifndef MBED_PERIPHERALNAMES_H
18+
#define MBED_PERIPHERALNAMES_H
19+
20+
#include "cmsis.h"
21+
22+
#ifdef __cplusplus
23+
extern "C" {
24+
#endif
25+
26+
typedef enum {
27+
DAC_1 = (int)DAC_BASE
28+
} DACName;
29+
30+
31+
typedef enum {
32+
ADC_1 = (int)ADC_BASE
33+
} ADCName;
34+
35+
36+
typedef enum {
37+
UART_1 = (int)USART1_BASE,
38+
UART_2 = (int)USART2_BASE,
39+
LPUART_1 = (int)LPUART1_BASE
40+
} UARTName;
41+
42+
#define DEVICE_SPI_COUNT 2
43+
typedef enum {
44+
SPI_1 = (int)SPI1_BASE,
45+
SPI_2 = (int)SPI2_BASE
46+
} SPIName;
47+
48+
typedef enum {
49+
I2C_1 = (int)I2C1_BASE,
50+
I2C_2 = (int)I2C2_BASE,
51+
I2C_3 = (int)I2C3_BASE
52+
} I2CName;
53+
54+
typedef enum {
55+
PWM_1 = (int)TIM1_BASE,
56+
PWM_2 = (int)TIM2_BASE,
57+
PWM_16 = (int)TIM16_BASE,
58+
PWM_17 = (int)TIM17_BASE
59+
} PWMName;
60+
61+
62+
#ifdef __cplusplus
63+
}
64+
#endif
65+
66+
#endif

‎targets/TARGET_STM/TARGET_STM32WL/TARGET_STM32WL55xC/TARGET_NUCLEO_WL55JC/PeripheralPins.c

Lines changed: 223 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,223 @@
1+
/* mbed Microcontroller Library
2+
* SPDX-License-Identifier: BSD-3-Clause
3+
******************************************************************************
4+
*
5+
* Copyright (c) 2016-2020 STMicroelectronics.
6+
* All rights reserved.
7+
*
8+
* This software component is licensed by ST under BSD 3-Clause license,
9+
* the "License"; You may not use this file except in compliance with the
10+
* License. You may obtain a copy of the License at:
11+
* opensource.org/licenses/BSD-3-Clause
12+
*
13+
******************************************************************************
14+
*
15+
* Automatically generated from STM32CubeMX/db/mcu/STM32WL55JCIx.xml
16+
*/
17+
18+
#include "PeripheralPins.h"
19+
#include "mbed_toolchain.h"
20+
21+
//==============================================================================
22+
// Notes
23+
//
24+
// - The pins mentioned Px_y_ALTz are alternative possibilities which use other
25+
// HW peripheral instances. You can use them the same way as any other "normal"
26+
// pin (i.e. PwmOut pwm(PA_7_ALT0);). These pins are not displayed on the board
27+
// pinout image on mbed.org.
28+
//
29+
// - The pins which are connected to other components present on the board have
30+
// the comment "Connected to xxx". The pin function may not work properly in this
31+
// case. These pins may not be displayed on the board pinout image on mbed.org.
32+
// Please read the board reference manual and schematic for more information.
33+
//
34+
// - Warning: pins connected to the default STDIO_UART_TX and STDIO_UART_RX pins are commented
35+
// See https://os.mbed.com/teams/ST/wiki/STDIO for more information.
36+
//
37+
//==============================================================================
38+
39+
40+
//*** ADC ***
41+
42+
MBED_WEAK const PinMap PinMap_ADC[] = {
43+
{PA_10, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
44+
{PA_11, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
45+
{PA_12, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
46+
{PA_13, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 // Connected to DEBUG_JTMS-SWDIO
47+
{PA_14, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC_IN10 // Connected to DEBUG_JTCK-SWCLK
48+
{PA_15, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC_IN11
49+
{PB_1, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
50+
{PB_2, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
51+
{PB_3, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
52+
{PB_4, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
53+
{PB_13, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
54+
{PB_14, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
55+
{NC, NC, 0}
56+
};
57+
58+
// !!! SECTION TO BE CHECKED WITH DEVICE REFERENCE MANUAL
59+
MBED_WEAK const PinMap PinMap_ADC_Internal[] = {
60+
// {ADC_TEMP, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)},
61+
// {ADC_VREF, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 17, 0)},
62+
// {ADC_VBAT, ADC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)},
63+
{NC, NC, 0}
64+
};
65+
66+
//*** DAC ***
67+
68+
MBED_WEAK const PinMap PinMap_DAC[] = {
69+
{PA_10, DAC_1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
70+
{NC, NC, 0}
71+
};
72+
73+
//*** I2C ***
74+
75+
MBED_WEAK const PinMap PinMap_I2C_SDA[] = {
76+
{PA_10, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
77+
{PA_11, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
78+
{PA_15, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
79+
{PB_4, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
80+
{PB_7, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
81+
{PB_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // Connected to LED2
82+
{PB_11, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)}, // Connected to LED3
83+
{PB_14, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
84+
{PC_1, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
85+
{NC, NC, 0}
86+
};
87+
88+
MBED_WEAK const PinMap PinMap_I2C_SCL[] = {
89+
{PA_7, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
90+
{PA_9, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
91+
{PA_12, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
92+
{PB_6, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
93+
{PB_8, I2C_1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
94+
{PB_10, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
95+
{PB_13, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
96+
{PB_15, I2C_2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // Connected to LED1
97+
{PC_0, I2C_3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
98+
{NC, NC, 0}
99+
};
100+
101+
//*** PWM ***
102+
103+
// TIM2 cannot be used because already used by the us_ticker
104+
// (update us_ticker_data.h file if another timer is chosen)
105+
MBED_WEAK const PinMap PinMap_PWM[] = {
106+
// {PA_0, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 // Connected to B1
107+
// {PA_1, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 // Connected to B2
108+
// {PA_2, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 // Connected to STDIO_UART_RX
109+
// {PA_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // Connected to STDIO_UART_RX
110+
// {PA_5, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
111+
{PA_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
112+
{PA_7, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
113+
{PA_7_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
114+
{PA_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
115+
{PA_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
116+
{PA_10, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
117+
{PA_11, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
118+
// {PA_15, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
119+
// {PB_3, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
120+
{PB_6, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
121+
{PB_7, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
122+
{PB_8, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
123+
{PB_8_ALT0, PWM_16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
124+
{PB_9, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N // Connected to LED2
125+
{PB_9_ALT0, PWM_17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1 // Connected to LED2
126+
// {PB_10, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
127+
// {PB_11, PWM_2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 // Connected to LED3
128+
{PB_13, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
129+
{PB_14, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
130+
{PB_15, PWM_1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N // Connected to LED1
131+
{NC, NC, 0}
132+
};
133+
134+
//*** SERIAL ***
135+
136+
MBED_WEAK const PinMap PinMap_UART_TX[] = {
137+
// {PA_2, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX
138+
// {PA_2_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to STDIO_UART_RX
139+
// {PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
140+
// {PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
141+
// {PB_11, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to LED3
142+
// {PC_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
143+
{PA_2, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to STDIO_UART_RX
144+
{PA_9, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
145+
{PB_6, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
146+
{NC, NC, 0}
147+
};
148+
149+
MBED_WEAK const PinMap PinMap_UART_RX[] = {
150+
// {PA_3, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to STDIO_UART_RX
151+
// {PA_3_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to STDIO_UART_RX
152+
// {PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
153+
// {PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
154+
// {PB_10, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
155+
// {PC_0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
156+
{PA_3, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to STDIO_UART_RX
157+
{PA_10, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
158+
{PB_7, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
159+
{NC, NC, 0}
160+
};
161+
162+
MBED_WEAK const PinMap PinMap_UART_RTS[] = {
163+
// {PA_1, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to B2
164+
{PA_1_ALT0, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)}, // Connected to B2
165+
{PA_12, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
166+
{PB_1, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
167+
{PB_3, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
168+
{PB_12, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
169+
{NC, NC, 0}
170+
};
171+
172+
MBED_WEAK const PinMap PinMap_UART_CTS[] = {
173+
// {PA_0, UART_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // Connected to B1
174+
{PA_6, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
175+
{PA_11, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
176+
{PB_4, UART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
177+
{PB_13, LPUART_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
178+
{NC, NC, 0}
179+
};
180+
181+
//*** SPI ***
182+
183+
MBED_WEAK const PinMap PinMap_SPI_MOSI[] = {
184+
{PA_7, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
185+
{PA_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
186+
{PA_12, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
187+
{PB_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
188+
{PB_15, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to LED1
189+
{PC_1, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_SPI2)},
190+
{PC_3, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to FE_CTRL3
191+
{NC, NC, 0}
192+
};
193+
194+
MBED_WEAK const PinMap PinMap_SPI_MISO[] = {
195+
{PA_5, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_SPI2)},
196+
{PA_6, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
197+
{PA_11, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
198+
{PB_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
199+
{PB_14, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
200+
{PC_2, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
201+
{NC, NC, 0}
202+
};
203+
204+
MBED_WEAK const PinMap PinMap_SPI_SCLK[] = {
205+
{PA_1, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)}, // Connected to B2
206+
{PA_5, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
207+
{PA_8, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
208+
{PA_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
209+
{PB_3, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
210+
{PB_10, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
211+
{PB_13, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
212+
{NC, NC, 0}
213+
};
214+
215+
MBED_WEAK const PinMap PinMap_SPI_SSEL[] = {
216+
{PA_4, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
217+
{PA_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF3_SPI2)},
218+
{PA_15, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
219+
{PB_2, SPI_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
220+
{PB_9, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)}, // Connected to LED2
221+
{PB_12, SPI_2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI2)},
222+
{NC, NC, 0}
223+
};

0 commit comments

Comments
 (0)