STM32G0: introduction of G030/G031/G041/G070/G081 sub-families

Author: jeromecoutant

targets/TARGET_STM/TARGET_STM32G0/STM32Cube_FW/CMSIS/stm32g030xx.h

@@ -0,0 +1,192 @@
+;******************************************************************************
+;* File Name          : startup_stm32g030xx.s
+;* Author             : MCD Application Team
+;* Description        : STM32G030xx devices vector table for MDK-ARM toolchain.
+;*                      This module performs:
+;*                      - Set the initial SP
+;*                      - Set the initial PC == Reset_Handler
+;*                      - Set the vector table entries with the exceptions ISR address
+;*                      - Branches to __main in the C library (which eventually
+;*                        calls main()).
+;*                      After Reset the CortexM0 processor is in Thread mode,
+;*                      priority is Privileged, and the Stack is set to Main.
+;* <<< Use Configuration Wizard in Context Menu >>>
+;****************************************************************************** 
+;* @attention
+;*
+;* Copyright (c) 2019 STMicroelectronics. All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the 
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
+                PRESERVE8
+                THUMB
+
+
+; Vector Table Mapped to Address 0 at Reset
+                AREA    RESET, DATA, READONLY
+                EXPORT  __Vectors
+                EXPORT  __Vectors_End
+                EXPORT  __Vectors_Size
+
+                IMPORT  |Image$$ARM_LIB_STACK$$ZI$$Limit|
+__Vectors       DCD     |Image$$ARM_LIB_STACK$$ZI$$Limit|                   ; Top of Stack
+                DCD     Reset_Handler                  ; Reset Handler
+                DCD     NMI_Handler                    ; NMI Handler
+                DCD     HardFault_Handler              ; Hard Fault Handler
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     SVC_Handler                    ; SVCall Handler
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     PendSV_Handler                 ; PendSV Handler
+                DCD     SysTick_Handler                ; SysTick Handler
+
+                ; External Interrupts
+                DCD     WWDG_IRQHandler                ; Window Watchdog
+                DCD     0                              ; Reserved
+                DCD     RTC_TAMP_IRQHandler            ; RTC through EXTI Line
+                DCD     FLASH_IRQHandler               ; FLASH
+                DCD     RCC_IRQHandler                 ; RCC
+                DCD     EXTI0_1_IRQHandler             ; EXTI Line 0 and 1
+                DCD     EXTI2_3_IRQHandler             ; EXTI Line 2 and 3
+                DCD     EXTI4_15_IRQHandler            ; EXTI Line 4 to 15
+                DCD     0                              ; Reserved
+                DCD     DMA1_Channel1_IRQHandler       ; DMA1 Channel 1
+                DCD     DMA1_Channel2_3_IRQHandler     ; DMA1 Channel 2 and Channel 3
+                DCD     DMA1_Ch4_5_DMAMUX1_OVR_IRQHandler ; DMA1 Channel 4 to Channel 5, DMAMUX1 overrun
+                DCD     ADC1_IRQHandler                ; ADC1
+                DCD     TIM1_BRK_UP_TRG_COM_IRQHandler ; TIM1 Break, Update, Trigger and Commutation
+                DCD     TIM1_CC_IRQHandler             ; TIM1 Capture Compare
+                DCD     0                              ; Reserved
+                DCD     TIM3_IRQHandler                ; TIM3
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     TIM14_IRQHandler               ; TIM14
+                DCD     0                              ; Reserved
+                DCD     TIM16_IRQHandler               ; TIM16
+                DCD     TIM17_IRQHandler               ; TIM17
+                DCD     I2C1_IRQHandler                ; I2C1
+                DCD     I2C2_IRQHandler                ; I2C2
+                DCD     SPI1_IRQHandler                ; SPI1
+                DCD     SPI2_IRQHandler                ; SPI2
+                DCD     USART1_IRQHandler              ; USART1
+                DCD     USART2_IRQHandler              ; USART2
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+                DCD     0                              ; Reserved
+
+__Vectors_End
+
+__Vectors_Size  EQU  __Vectors_End - __Vectors
+
+                AREA    |.text|, CODE, READONLY
+
+; Reset handler routine
+Reset_Handler    PROC
+                 EXPORT  Reset_Handler                 [WEAK]
+        IMPORT  __main
+        IMPORT  SystemInit  
+                 LDR     R0, =SystemInit
+                 BLX     R0
+                 LDR     R0, =__main
+                 BX      R0
+                 ENDP
+
+; Dummy Exception Handlers (infinite loops which can be modified)
+
+NMI_Handler     PROC
+                EXPORT  NMI_Handler                    [WEAK]
+                B       .
+                ENDP
+HardFault_Handler\
+                PROC
+                EXPORT  HardFault_Handler              [WEAK]
+                B       .
+                ENDP
+SVC_Handler     PROC
+                EXPORT  SVC_Handler                    [WEAK]
+                B       .
+                ENDP
+PendSV_Handler  PROC
+                EXPORT  PendSV_Handler                 [WEAK]
+                B       .
+                ENDP
+SysTick_Handler PROC
+                EXPORT  SysTick_Handler                [WEAK]
+                B       .
+                ENDP
+
+Default_Handler PROC
+
+                EXPORT  WWDG_IRQHandler                [WEAK]
+                EXPORT  RTC_TAMP_IRQHandler            [WEAK]
+                EXPORT  FLASH_IRQHandler               [WEAK]
+                EXPORT  RCC_IRQHandler                 [WEAK]
+                EXPORT  EXTI0_1_IRQHandler             [WEAK]
+                EXPORT  EXTI2_3_IRQHandler             [WEAK]
+                EXPORT  EXTI4_15_IRQHandler            [WEAK]
+                EXPORT  DMA1_Channel1_IRQHandler       [WEAK]
+                EXPORT  DMA1_Channel2_3_IRQHandler     [WEAK]
+                EXPORT  DMA1_Ch4_5_DMAMUX1_OVR_IRQHandler [WEAK]
+                EXPORT  ADC1_IRQHandler                [WEAK]
+                EXPORT  TIM1_BRK_UP_TRG_COM_IRQHandler [WEAK]
+                EXPORT  TIM1_CC_IRQHandler             [WEAK]
+                EXPORT  TIM3_IRQHandler                [WEAK]
+                EXPORT  TIM14_IRQHandler               [WEAK]
+                EXPORT  TIM16_IRQHandler               [WEAK]
+                EXPORT  TIM17_IRQHandler               [WEAK]
+                EXPORT  I2C1_IRQHandler                [WEAK]
+                EXPORT  I2C2_IRQHandler                [WEAK]
+                EXPORT  SPI1_IRQHandler                [WEAK]
+                EXPORT  SPI2_IRQHandler                [WEAK]
+                EXPORT  USART1_IRQHandler              [WEAK]
+                EXPORT  USART2_IRQHandler              [WEAK]
+
+
+WWDG_IRQHandler
+RTC_TAMP_IRQHandler
+FLASH_IRQHandler
+RCC_IRQHandler
+EXTI0_1_IRQHandler
+EXTI2_3_IRQHandler
+EXTI4_15_IRQHandler
+DMA1_Channel1_IRQHandler
+DMA1_Channel2_3_IRQHandler
+DMA1_Ch4_5_DMAMUX1_OVR_IRQHandler
+ADC1_IRQHandler
+TIM1_BRK_UP_TRG_COM_IRQHandler
+TIM1_CC_IRQHandler
+TIM3_IRQHandler
+TIM14_IRQHandler
+TIM16_IRQHandler
+TIM17_IRQHandler
+I2C1_IRQHandler
+I2C2_IRQHandler
+SPI1_IRQHandler
+SPI2_IRQHandler
+USART1_IRQHandler
+USART2_IRQHandler
+
+                B       .
+
+                ENDP
+
+                ALIGN
+
+;*******************************************************************************
+; User Stack and Heap initialization
+;*******************************************************************************
+
+                 END
+
+;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****

targets/TARGET_STM/TARGET_STM32G0/STM32Cube_FW/CMSIS/stm32g031xx.h

@@ -0,0 +1,53 @@
+#! armcc -E
+; Scatter-Loading Description File
+;
+; SPDX-License-Identifier: BSD-3-Clause
+;******************************************************************************
+;* @attention
+;*
+;* Copyright (c) 2016-2020 STMicroelectronics.
+;* All rights reserved.
+;*
+;* This software component is licensed by ST under BSD 3-Clause license,
+;* the "License"; You may not use this file except in compliance with the
+;* License. You may obtain a copy of the License at:
+;*                        opensource.org/licenses/BSD-3-Clause
+;*
+;******************************************************************************
+
+#include "../cmsis_nvic.h"
+
+#if !defined(MBED_APP_START)
+  #define MBED_APP_START  MBED_ROM_START
+#endif
+
+#if !defined(MBED_APP_SIZE)
+  #define MBED_APP_SIZE  MBED_ROM_SIZE
+#endif
+
+#if !defined(MBED_BOOT_STACK_SIZE)
+/* This value is normally defined by the tools to 0x1000 for bare metal and 0x400 for RTOS */
+  #define MBED_BOOT_STACK_SIZE  0x400
+#endif
+
+/* Round up VECTORS_SIZE to 8 bytes */
+#define VECTORS_SIZE  (((NVIC_NUM_VECTORS * 4) + 7) AND ~7)
+
+LR_IROM1  MBED_APP_START  MBED_APP_SIZE  {
+
+  ER_IROM1  MBED_APP_START  MBED_APP_SIZE  {
+    *.o (RESET, +First)
+    *(InRoot$$Sections)
+    .ANY (+RO)
+  }
+
+  RW_IRAM1  (MBED_RAM_START + VECTORS_SIZE)  {  ; RW data
+    .ANY (+RW +ZI)
+  }
+
+  ARM_LIB_HEAP  AlignExpr(+0, 16)  EMPTY  (MBED_RAM_START + MBED_RAM_SIZE - MBED_BOOT_STACK_SIZE - AlignExpr(ImageLimit(RW_IRAM1), 16))  { ; Heap growing up
+  }
+
+  ARM_LIB_STACK  (MBED_RAM_START + MBED_RAM_SIZE)  EMPTY  -MBED_BOOT_STACK_SIZE  { ; Stack region growing down
+  }
+}