Remove OR from ST endpoint activation

When activating an endpoint assign new data rather than ORing
data to it. This ensures that values set from the previous use
do not effect the current configuration.

Author: c1728p9

targets/TARGET_STM/TARGET_STM32F2/device/stm32f2xx_ll_usb.c

@@ -430,7 +430,7 @@ HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTy
 
     if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U)
     {
-      USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U ) |\
+      USBx_INEP(ep->num)->DIEPCTL = ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U ) |\
         ((ep->num) << 22U ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); 
     } 
 
@@ -441,7 +441,7 @@ HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTy
 
     if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U)
     {
-      USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U ) |\
+      USBx_OUTEP(ep->num)->DOEPCTL = ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U ) |\
        (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
     } 
   }
@@ -462,7 +462,7 @@ HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB
   {
     if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0U)
     {
-      USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
+      USBx_INEP(ep->num)->DIEPCTL = ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18U) |\
         ((ep->num) << 22U) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP)); 
     } 
 
@@ -476,7 +476,7 @@ HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB
   {
     if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0U)
     {
-      USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
+      USBx_OUTEP(ep->num)->DOEPCTL = ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18U) |\
         ((ep->num) << 22U) | (USB_OTG_DOEPCTL_USBAEP));
 
       debug = (uint32_t)(((uint32_t )USBx) + USB_OTG_OUT_ENDPOINT_BASE + (0U)*USB_OTG_EP_REG_SIZE);