Skip to content

Commit f7cee14

Browse files
0xc01700xc0170
committed
KL05Z GCC support, exporters for arm_gcc, uvision
1 parent da605b8 commit f7cee14

File tree

9 files changed

+1070
-4
lines changed

9 files changed

+1070
-4
lines changed

‎libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_KL05Z/TOOLCHAIN_GCC_ARM/MKL05Z4.ld

Lines changed: 163 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,163 @@
1+
/*
2+
* KL05Z ARM GCC linker script file, Martin Kojtal (0xc0170)
3+
*/
4+
5+
MEMORY
6+
{
7+
VECTORS (rx) : ORIGIN = 0x00000000, LENGTH = 0x00000400
8+
FLASH_PROTECTION (rx) : ORIGIN = 0x00000400, LENGTH = 0x00000010
9+
FLASH (rx) : ORIGIN = 0x00000410, LENGTH = 32K - 0x00000410
10+
RAM (rwx) : ORIGIN = 0x1FFFFC00, LENGTH = 4K - 0xC0
11+
}
12+
13+
/* Linker script to place sections and symbol values. Should be used together
14+
* with other linker script that defines memory regions FLASH and RAM.
15+
* It references following symbols, which must be defined in code:
16+
* _reset_init : Entry of reset handler
17+
*
18+
* It defines following symbols, which code can use without definition:
19+
* __exidx_start
20+
* __exidx_end
21+
* __etext
22+
* __data_start__
23+
* __preinit_array_start
24+
* __preinit_array_end
25+
* __init_array_start
26+
* __init_array_end
27+
* __fini_array_start
28+
* __fini_array_end
29+
* __data_end__
30+
* __bss_start__
31+
* __bss_end__
32+
* __end__
33+
* end
34+
* __HeapLimit
35+
* __StackLimit
36+
* __StackTop
37+
* __stack
38+
*/
39+
ENTRY(Reset_Handler)
40+
41+
SECTIONS
42+
{
43+
.isr_vector :
44+
{
45+
__vector_table = .;
46+
KEEP(*(.vector_table))
47+
*(.text.Reset_Handler)
48+
*(.text.System_Init)
49+
. = ALIGN(4);
50+
} > VECTORS
51+
52+
.flash_protect :
53+
{
54+
KEEP(*(.kinetis_flash_config_field))
55+
. = ALIGN(4);
56+
} > FLASH_PROTECTION
57+
58+
.text :
59+
{
60+
*(.text*)
61+
62+
KEEP(*(.init))
63+
KEEP(*(.fini))
64+
65+
/* .ctors */
66+
*crtbegin.o(.ctors)
67+
*crtbegin?.o(.ctors)
68+
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
69+
*(SORT(.ctors.*))
70+
*(.ctors)
71+
72+
/* .dtors */
73+
*crtbegin.o(.dtors)
74+
*crtbegin?.o(.dtors)
75+
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
76+
*(SORT(.dtors.*))
77+
*(.dtors)
78+
79+
*(.rodata*)
80+
81+
KEEP(*(.eh_frame*))
82+
} > FLASH
83+
84+
.ARM.extab :
85+
{
86+
*(.ARM.extab* .gnu.linkonce.armextab.*)
87+
} > FLASH
88+
89+
__exidx_start = .;
90+
.ARM.exidx :
91+
{
92+
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
93+
} > FLASH
94+
__exidx_end = .;
95+
96+
__etext = .;
97+
98+
.data : AT (__etext)
99+
{
100+
__data_start__ = .;
101+
*(vtable)
102+
*(.data*)
103+
104+
. = ALIGN(4);
105+
/* preinit data */
106+
PROVIDE_HIDDEN (__preinit_array_start = .);
107+
KEEP(*(.preinit_array))
108+
PROVIDE_HIDDEN (__preinit_array_end = .);
109+
110+
. = ALIGN(4);
111+
/* init data */
112+
PROVIDE_HIDDEN (__init_array_start = .);
113+
KEEP(*(SORT(.init_array.*)))
114+
KEEP(*(.init_array))
115+
PROVIDE_HIDDEN (__init_array_end = .);
116+
117+
118+
. = ALIGN(4);
119+
/* finit data */
120+
PROVIDE_HIDDEN (__fini_array_start = .);
121+
KEEP(*(SORT(.fini_array.*)))
122+
KEEP(*(.fini_array))
123+
PROVIDE_HIDDEN (__fini_array_end = .);
124+
125+
. = ALIGN(4);
126+
/* All data end */
127+
__data_end__ = .;
128+
129+
} > RAM
130+
131+
.bss :
132+
{
133+
__bss_start__ = .;
134+
*(.bss*)
135+
*(COMMON)
136+
__bss_end__ = .;
137+
} > RAM
138+
139+
.heap :
140+
{
141+
__end__ = .;
142+
end = __end__;
143+
*(.heap*)
144+
__HeapLimit = .;
145+
} > RAM
146+
147+
/* .stack_dummy section doesn't contains any symbols. It is only
148+
* used for linker to calculate size of stack sections, and assign
149+
* values to stack symbols later */
150+
.stack_dummy :
151+
{
152+
*(.stack)
153+
} > RAM
154+
155+
/* Set stack top to end of RAM, and stack limit move down by
156+
* size of stack_dummy section */
157+
__StackTop = ORIGIN(RAM) + LENGTH(RAM);
158+
__StackLimit = __StackTop - SIZEOF(.stack_dummy);
159+
PROVIDE(__stack = __StackTop);
160+
161+
/* Check if data + heap + stack exceeds RAM limit */
162+
ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")
163+
}

‎libraries/mbed/targets/cmsis/TARGET_Freescale/TARGET_KL05Z/TOOLCHAIN_GCC_ARM/startup_MKL05Z4.s

Lines changed: 230 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,230 @@
1+
/* KL05Z startup ARM GCC, Martin Kojtal (0xc0170)
2+
* Purpose: startup file for Cortex-M0 devices. Should use with
3+
* GCC for ARM Embedded Processors
4+
* Version: V1.2
5+
* Date: 15 Nov 2011
6+
*
7+
* Copyright (c) 2011, ARM Limited
8+
* All rights reserved.
9+
*
10+
* Redistribution and use in source and binary forms, with or without
11+
* modification, are permitted provided that the following conditions are met:
12+
* Redistributions of source code must retain the above copyright
13+
notice, this list of conditions and the following disclaimer.
14+
* Redistributions in binary form must reproduce the above copyright
15+
notice, this list of conditions and the following disclaimer in the
16+
documentation and/or other materials provided with the distribution.
17+
* Neither the name of the ARM Limited nor the
18+
names of its contributors may be used to endorse or promote products
19+
derived from this software without specific prior written permission.
20+
*
21+
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
22+
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
23+
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
24+
* DISCLAIMED. IN NO EVENT SHALL ARM LIMITED BE LIABLE FOR ANY
25+
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
26+
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
27+
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
28+
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
29+
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
30+
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31+
*/
32+
.syntax unified
33+
.arch armv6-m
34+
35+
/* Memory Model
36+
The HEAP starts at the end of the DATA section and grows upward.
37+
38+
The STACK starts at the end of the RAM and grows downward.
39+
40+
The HEAP and stack STACK are only checked at compile time:
41+
(DATA_SIZE + HEAP_SIZE + STACK_SIZE) < RAM_SIZE
42+
43+
This is just a check for the bare minimum for the Heap+Stack area before
44+
aborting compilation, it is not the run time limit:
45+
Heap_Size + Stack_Size = 0x80 + 0x80 = 0x100
46+
*/
47+
.section .stack
48+
.align 3
49+
#ifdef __STACK_SIZE
50+
.equ Stack_Size, __STACK_SIZE
51+
#else
52+
.equ Stack_Size, 0x80
53+
#endif
54+
.globl __StackTop
55+
.globl __StackLimit
56+
__StackLimit:
57+
.space Stack_Size
58+
.size __StackLimit, . - __StackLimit
59+
__StackTop:
60+
.size __StackTop, . - __StackTop
61+
62+
.section .heap
63+
.align 3
64+
#ifdef __HEAP_SIZE
65+
.equ Heap_Size, __HEAP_SIZE
66+
#else
67+
.equ Heap_Size, 0x80
68+
#endif
69+
.globl __HeapBase
70+
.globl __HeapLimit
71+
__HeapBase:
72+
.space Heap_Size
73+
.size __HeapBase, . - __HeapBase
74+
__HeapLimit:
75+
.size __HeapLimit, . - __HeapLimit
76+
77+
.section .vector_table,"a",%progbits
78+
.align 2
79+
.globl __isr_vector
80+
__isr_vector:
81+
.long __StackTop /* Top of Stack */
82+
.long Reset_Handler /* Reset Handler */
83+
.long NMI_Handler /* NMI Handler */
84+
.long HardFault_Handler /* Hard Fault Handler */
85+
.long 0 /* Reserved */
86+
.long 0 /* Reserved */
87+
.long 0 /* Reserved */
88+
.long 0 /* Reserved */
89+
.long 0 /* Reserved */
90+
.long 0 /* Reserved */
91+
.long 0 /* Reserved */
92+
.long SVC_Handler /* SVCall Handler */
93+
.long 0 /* Reserved */
94+
.long 0 /* Reserved */
95+
.long PendSV_Handler /* PendSV Handler */
96+
.long SysTick_Handler /* SysTick Handler */
97+
98+
/* External interrupts */
99+
.long DMA0_IRQHandler /* DMA channel 0 transfer complete interrupt */
100+
.long DMA1_IRQHandler /* DMA channel 1 transfer complete interrupt */
101+
.long DMA2_IRQHandler /* DMA channel 2 transfer complete interrupt */
102+
.long DMA3_IRQHandler /* DMA channel 3 transfer complete interrupt */
103+
.long Default_Handler /* Reserved interrupt 20 */
104+
.long FTFA_IRQHandler /* FTFA interrupt */
105+
.long LVD_LVW_IRQHandler /* Low Voltage Detect, Low Voltage Warning */
106+
.long LLW_IRQHandler /* Low Leakage Wakeup */
107+
.long I2C0_IRQHandler /* I2C0 interrupt */
108+
.long Default_Handler /* Reserved interrupt 25 */
109+
.long SPI0_IRQHandler /* SPI0 interrupt */
110+
.long Default_Handler /* Reserved interrupt 27 */
111+
.long UART0_IRQHandler /* UART0 status/error interrupt */
112+
.long Default_Handler /* Reserved interrupt 29 */
113+
.long Default_Handler /* Reserved interrupt 30 */
114+
.long ADC0_IRQHandler /* ADC0 interrupt */
115+
.long CMP0_IRQHandler /* CMP0 interrupt */
116+
.long TPM0_IRQHandler /* TPM0 fault, overflow and channels interrupt */
117+
.long TPM1_IRQHandler /* TPM1 fault, overflow and channels interrupt */
118+
.long Default_Handler /* Reserved interrupt 35 */
119+
.long RTC_IRQHandler /* RTC interrupt */
120+
.long RTC_Seconds_IRQHandler /* RTC seconds interrupt */
121+
.long PIT_IRQHandler /* PIT timer interrupt */
122+
.long Default_Handler /* Reserved interrupt 39 */
123+
.long Default_Handler /* Reserved interrupt 40 */
124+
.long DAC0_IRQHandler /* DAC interrupt */
125+
.long TSI0_IRQHandler /* TSI0 interrupt */
126+
.long MCG_IRQHandler /* MCG interrupt */
127+
.long LPTimer_IRQHandler /* LPTimer interrupt */
128+
.long Default_Handler /* Reserved interrupt 45 */
129+
.long PORTA_IRQHandler /* Port A interrupt */
130+
.long PORTB_IRQHandler /* Port B interrupt */
131+
132+
.size __isr_vector, . - __isr_vector
133+
134+
.section .text.Reset_Handler
135+
.thumb
136+
.thumb_func
137+
.align 2
138+
.globl Reset_Handler
139+
.type Reset_Handler, %function
140+
Reset_Handler:
141+
/* Loop to copy data from read only memory to RAM. The ranges
142+
* of copy from/to are specified by following symbols evaluated in
143+
* linker script.
144+
* __etext: End of code section, i.e., begin of data sections to copy from.
145+
* __data_start__/__data_end__: RAM address range that data should be
146+
* copied to. Both must be aligned to 4 bytes boundary. */
147+
148+
ldr r1, =__etext
149+
ldr r2, =__data_start__
150+
ldr r3, =__data_end__
151+
152+
subs r3, r2
153+
ble .flash_to_ram_loop_end
154+
155+
movs r4, 0
156+
.flash_to_ram_loop:
157+
ldr r0, [r1,r4]
158+
str r0, [r2,r4]
159+
adds r4, 4
160+
cmp r4, r3
161+
blt .flash_to_ram_loop
162+
.flash_to_ram_loop_end:
163+
164+
ldr r0, =SystemInit
165+
blx r0
166+
ldr r0, =_start
167+
bx r0
168+
.pool
169+
.size Reset_Handler, . - Reset_Handler
170+
171+
.text
172+
/* Macro to define default handlers. Default handler
173+
* will be weak symbol and just dead loops. They can be
174+
* overwritten by other handlers */
175+
.macro def_default_handler handler_name
176+
.align 1
177+
.thumb_func
178+
.weak \handler_name
179+
.type \handler_name, %function
180+
\handler_name :
181+
b .
182+
.size \handler_name, . - \handler_name
183+
.endm
184+
185+
def_default_handler NMI_Handler
186+
def_default_handler HardFault_Handler
187+
def_default_handler SVC_Handler
188+
def_default_handler PendSV_Handler
189+
def_default_handler SysTick_Handler
190+
def_default_handler Default_Handler
191+
192+
def_default_handler DMA0_IRQHandler
193+
def_default_handler DMA1_IRQHandler
194+
def_default_handler DMA2_IRQHandler
195+
def_default_handler DMA3_IRQHandler
196+
def_default_handler FTFA_IRQHandler
197+
def_default_handler LVD_LVW_IRQHandler
198+
def_default_handler LLW_IRQHandler
199+
def_default_handler I2C0_IRQHandler
200+
def_default_handler SPI0_IRQHandler
201+
def_default_handler UART0_IRQHandler
202+
def_default_handler ADC0_IRQHandler
203+
def_default_handler CMP0_IRQHandler
204+
def_default_handler TPM0_IRQHandler
205+
def_default_handler TPM1_IRQHandler
206+
def_default_handler RTC_IRQHandler
207+
def_default_handler RTC_Seconds_IRQHandler
208+
def_default_handler PIT_IRQHandler
209+
def_default_handler DAC0_IRQHandler
210+
def_default_handler TSI0_IRQHandler
211+
def_default_handler MCG_IRQHandler
212+
def_default_handler LPTimer_IRQHandler
213+
def_default_handler PORTA_IRQHandler
214+
def_default_handler PORTB_IRQHandler
215+
216+
.weak DEF_IRQHandler
217+
.set DEF_IRQHandler, Default_Handler
218+
219+
/* Flash protection region, placed at 0x400 */
220+
.text
221+
.thumb
222+
.align 2
223+
.section .kinetis_flash_config_field,"a",%progbits
224+
kinetis_flash_config:
225+
.long 0xffffffff
226+
.long 0xffffffff
227+
.long 0xffffffff
228+
.long 0xfffffffe
229+
230+
.end

0 commit comments

Comments
 (0)