DISCO_L496AG: Add PMOD and STMOD+ connector

Author: jeromecoutant

targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L496xG/TARGET_DISCO_L496AG/PinNames.h

@@ -349,6 +349,42 @@ typedef enum {
     QSPI_FLASH1_SCK = PA_3,
     QSPI_FLASH1_CSN = PB_11,
 
+    /**** STMOD+ pins ****/
+    STMOD_1  = PG_11, // UART1_CTS // SPI3_MOSI // PWM_15
+    STMOD_2  = PB_6,  // UART1_TX // CAN2_TD // I2C1_SCL // PWM_4
+    STMOD_3  = PG_10, // UART1_RX // PWM_15 // SPI3_MISO
+    STMOD_4  = PG_12, // UART1_RTS
+    STMOD_5  = NC,    // GND
+    STMOD_6  = NC,    // +5V
+    STMOD_7  = PB_8,  // I2C1_SCL // CAN1_RD // PWM_4
+    STMOD_8  = PI_3,  // SPI2_MOSI
+    STMOD_9  = PD_3,  // SPI2_MISO // SPI2_SCLK // UART2_CTS
+    STMOD_10 = PB_7,  // I2C1_SDA // UART1_RX // UART4_CTS
+    STMOD_11 = PH_2,
+    STMOD_12 = PB_2,
+    STMOD_13 = PA_4,  // ADC1_IN9 // DAC1_OUT1
+    STMOD_14 = PA_0,  // ADC1_IN5 // PWM_2 // UART4_TX // UART2_CTS
+    STMOD_15 = NC,    // +5V
+    STMOD_16 = NC,    // GND
+    STMOD_17 = PC_7,  // PWM_3
+    STMOD_18 = PC_2,  // SPI2_MISO // ADC1_IN3
+    STMOD_19 = PB_12, // LPUART1_RTS // CAN2_RD
+    STMOD_20 = PC_2,  // ADC1_IN3 // SPI2_MISO
+
+    /**** PMOD pins ****/
+    PMOD_1  = STMOD_1,
+    PMOD_2  = STMOD_2,
+    PMOD_3  = STMOD_3,
+    PMOD_4  = STMOD_4,
+    PMOD_5  = NC, // GND
+    PMOD_6  = NC, // 3V3
+    PMOD_7  = STMOD_11,
+    PMOD_8  = STMOD_12,
+    PMOD_9  = NC,
+    PMOD_10 = NC,
+    PMOD_11 = NC, // GND
+    PMOD_12 = NC, // 3V3
+
     // Not connected
     NC = (int)0xFFFFFFFF
 } PinName;

targets/targets.json

@@ -7514,7 +7514,7 @@
     },
     "DISCO_L496AG": {
         "inherits": ["FAMILY_STM32"],
-        "supported_form_factors": ["ARDUINO"],
+        "supported_form_factors": ["ARDUINO", "STMOD", "PMOD"],
         "core": "Cortex-M4F",
         "extra_labels_add": ["STM32L4", "STM32L496AG", "STM32L496xG"],
         "components_add": ["QSPIF"],