changed domain name of online. (#20802)

Author: LucasYao93

documentation/announcing-az-module.md

@@ -173,7 +173,7 @@ Az and AzureRM cannot be imported side-by-side into the same PowerShell session.
 - Install Az and AzureRM side-by-side in Windows PowerShell and ensure scripts do not mix the modules
 
 #### Install Az in PowerShell 7
-You can follow the instructions in [Installing PowerShell 7 on Windows](https://docs.microsoft.com/powershell/scripting/install/installing-powershell-core-on-windows
+You can follow the instructions in [Installing PowerShell 7 on Windows](https://learn.microsoft.com/powershell/scripting/install/installing-powershell-core-on-windows
 ) to install PowerShell 7, then use ```Install-Module Az``` in PowerShell 7 to acquire the Az module.  Since Windows PowerShell and PowerShell 7 can exist side-by-side and do not share module directories, this will effectively isolate the two modules.
 
 #### Install Az and AzureRM Side-by-Side

documentation/development-docs/using-config-framework.md

@@ -17,7 +17,7 @@
 
 The config framework was introduced in Az 8, May 2022 to set up a standard of how configs are used by both developers and end users of Azure PowerShell.
 
-This document will go over two most common scenarios for developers. As for how to use the config framework in PowerShell please refer to [Update-AzConfig](https://docs.microsoft.com/powershell/module/az.accounts/update-azconfig).
+This document will go over two most common scenarios for developers. As for how to use the config framework in PowerShell please refer to [Update-AzConfig](https://learn.microsoft.com/powershell/module/az.accounts/update-azconfig).
 
 ## Guide: How to Add a New Config
 

src/ApplicationInsights/Az.ApplicationInsights.psm1

@@ -33,7 +33,7 @@
   }
 
   if(-not $accountsModule) {
-    Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. For installation instructions, please see: https://docs.microsoft.com/powershell/azure/install-az-ps" -ErrorAction Stop
+    Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. For installation instructions, please see: https://learn.microsoft.com/powershell/azure/install-az-ps" -ErrorAction Stop
   } elseif (($accountsModule.Version -lt [System.Version]'2.7.5') -and (-not $localAccounts)) {
     Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. An earlier version of Az.Accounts is imported in the current PowerShell session. If you are running test, please try to add the switch '-RegenerateSupportModule' when executing 'test-module.ps1'. Otherwise please open a new PowerShell session and import this module again.`nAdditionally, this error could indicate that multiple incompatible versions of Azure PowerShell modules are installed on your system. For troubleshooting information, please see: https://aka.ms/azps-version-error" -ErrorAction Stop
   }

src/ApplicationInsights/custom/README.md

@@ -32,7 +32,7 @@ These provide functionality to our HTTP pipeline and other useful features. In s
 ### Attributes
 For processing the cmdlets, we've created some additional attributes:
 - `Microsoft.Azure.PowerShell.Cmdlets.ApplicationInsights.DescriptionAttribute`
-  - Used in C# cmdlets to provide a high-level description of the cmdlet. This is propagated to reference documentation via [help comments](https://docs.microsoft.com/powershell/module/microsoft.powershell.core/about/about_comment_based_help) in the exported scripts.
+  - Used in C# cmdlets to provide a high-level description of the cmdlet. This is propagated to reference documentation via [help comments](https://learn.microsoft.com/powershell/module/microsoft.powershell.core/about/about_comment_based_help) in the exported scripts.
 - `Microsoft.Azure.PowerShell.Cmdlets.ApplicationInsights.DoNotExportAttribute`
   - Used in C# and script cmdlets to suppress creating an exported cmdlet at build-time. These cmdlets will *not be exposed* by `Az.ApplicationInsights`.
 - `Microsoft.Azure.PowerShell.Cmdlets.ApplicationInsights.InternalExportAttribute`

src/ApplicationInsights/exports/README.md

@@ -1,5 +1,5 @@
 # Exports
-This directory contains the cmdlets *exported by* `Az.ApplicationInsights`. No other cmdlets in this repository are directly exported. What that means is the `Az.ApplicationInsights` module will run [Export-ModuleMember](https://docs.microsoft.com/powershell/module/microsoft.powershell.core/export-modulemember) on the cmldets in this directory. The cmdlets in this directory are generated at **build-time**. Do not put any custom code, files, cmdlets, etc. into this directory. Please use `..\custom` for all custom implementation.
+This directory contains the cmdlets *exported by* `Az.ApplicationInsights`. No other cmdlets in this repository are directly exported. What that means is the `Az.ApplicationInsights` module will run [Export-ModuleMember](https://learn.microsoft.com/powershell/module/microsoft.powershell.core/export-modulemember) on the cmldets in this directory. The cmdlets in this directory are generated at **build-time**. Do not put any custom code, files, cmdlets, etc. into this directory. Please use `..\custom` for all custom implementation.
 
 ## Info
 - Modifiable: no

src/ApplicationInsights/how-to.md

@@ -14,7 +14,7 @@ To generate documentation, the process is now integrated into the `build-module.
 To test the cmdlets, we use [Pester](https://github.com/pester/Pester). Tests scripts (`.ps1`) should be added to the `test` folder. To execute the Pester tests, run the `test-module.ps1` script. This will run all tests in `playback` mode within the `test` folder. To read more about testing cmdlets, look at the [README.md](examples/README.md) in the `examples` folder.
 
 ## Packing `Az.ApplicationInsights`
-To pack `Az.ApplicationInsights` for distribution, run the `pack-module.ps1` script. This will take the contents of multiple directories and certain root-folder files to create a `.nupkg`. The structure of the `.nupkg` is created so it can be loaded part of a [PSRepository](https://docs.microsoft.com/powershell/module/powershellget/register-psrepository). Additionally, this package is in a format for distribution to the [PSGallery](https://www.powershellgallery.com/). For signing an Azure module, please contact the [Azure PowerShell](https://github.com/Azure/azure-powershell) team.
+To pack `Az.ApplicationInsights` for distribution, run the `pack-module.ps1` script. This will take the contents of multiple directories and certain root-folder files to create a `.nupkg`. The structure of the `.nupkg` is created so it can be loaded part of a [PSRepository](https://learn.microsoft.com/powershell/module/powershellget/register-psrepository). Additionally, this package is in a format for distribution to the [PSGallery](https://www.powershellgallery.com/). For signing an Azure module, please contact the [Azure PowerShell](https://github.com/Azure/azure-powershell) team.
 
 ## Module Script Details
 There are multiple scripts created for performing different actions for developing `Az.ApplicationInsights`.

src/ApplicationInsights/internal/README.md

@@ -8,7 +8,7 @@ This directory contains a module to handle *internal only* cmdlets. Cmdlets that
 - Packaged: yes
 
 ## Details
-The `Az.ApplicationInsights.internal.psm1` file is generated to this folder. This module file handles the hidden cmdlets. These cmdlets will not be exported by `Az.ApplicationInsights`. Instead, this sub-module is imported by the `..\custom\Az.ApplicationInsights.custom.psm1` module, allowing you to use hidden cmdlets in your custom, exposed cmdlets. To call these cmdlets in your custom scripts, simply use [module-qualified calls](https://docs.microsoft.com/powershell/module/microsoft.powershell.core/about/about_command_precedence?view=powershell-6#qualified-names). For example, `Az.ApplicationInsights.internal\Get-Example` would call an internal cmdlet named `Get-Example`.
+The `Az.ApplicationInsights.internal.psm1` file is generated to this folder. This module file handles the hidden cmdlets. These cmdlets will not be exported by `Az.ApplicationInsights`. Instead, this sub-module is imported by the `..\custom\Az.ApplicationInsights.custom.psm1` module, allowing you to use hidden cmdlets in your custom, exposed cmdlets. To call these cmdlets in your custom scripts, simply use [module-qualified calls](https://learn.microsoft.com/powershell/module/microsoft.powershell.core/about/about_command_precedence?view=powershell-6#qualified-names). For example, `Az.ApplicationInsights.internal\Get-Example` would call an internal cmdlet named `Get-Example`.
 
 ## Purpose
 This allows you to include REST specifications for services that you *do not wish to expose from your module*, but simply want to call within custom cmdlets. For example, if you want to make a custom cmdlet that uses `Storage` services, you could include a simplified `Storage` REST specification that has only the operations you need. When you run the generator and build this module, note the generated `Storage` cmdlets. Then, in your readme configuration, use [cmdlet hiding](https://github.com/Azure/autorest/blob/master/docs/powershell/options.md#cmdlet-hiding-exportation-suppression) on the `Storage` cmdlets and they will *only be exposed to the custom cmdlets* you want to write, and not be exported as part of `Az.ApplicationInsights`.

src/BillingBenefits/Az.BillingBenefits.psm1

@@ -33,7 +33,7 @@
   }
 
   if(-not $accountsModule) {
-    Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. For installation instructions, please see: https://docs.microsoft.com/powershell/azure/install-az-ps" -ErrorAction Stop
+    Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. For installation instructions, please see: https://learn.microsoft.com/powershell/azure/install-az-ps" -ErrorAction Stop
   } elseif (($accountsModule.Version -lt [System.Version]'2.7.5') -and (-not $localAccounts)) {
     Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. An earlier version of Az.Accounts is imported in the current PowerShell session. If you are running test, please try to add the switch '-RegenerateSupportModule' when executing 'test-module.ps1'. Otherwise please open a new PowerShell session and import this module again.`nAdditionally, this error could indicate that multiple incompatible versions of Azure PowerShell modules are installed on your system. For troubleshooting information, please see: https://aka.ms/azps-version-error" -ErrorAction Stop
   }

src/BillingBenefits/custom/README.md

@@ -32,7 +32,7 @@ These provide functionality to our HTTP pipeline and other useful features. In s
 ### Attributes
 For processing the cmdlets, we've created some additional attributes:
 - `Microsoft.Azure.PowerShell.Cmdlets.BillingBenefits.DescriptionAttribute`
-  - Used in C# cmdlets to provide a high-level description of the cmdlet. This is propagated to reference documentation via [help comments](https://docs.microsoft.com/powershell/module/microsoft.powershell.core/about/about_comment_based_help) in the exported scripts.
+  - Used in C# cmdlets to provide a high-level description of the cmdlet. This is propagated to reference documentation via [help comments](https://learn.microsoft.com/powershell/module/microsoft.powershell.core/about/about_comment_based_help) in the exported scripts.
 - `Microsoft.Azure.PowerShell.Cmdlets.BillingBenefits.DoNotExportAttribute`
   - Used in C# and script cmdlets to suppress creating an exported cmdlet at build-time. These cmdlets will *not be exposed* by `Az.BillingBenefits`.
 - `Microsoft.Azure.PowerShell.Cmdlets.BillingBenefits.InternalExportAttribute`

src/BillingBenefits/exports/README.md

@@ -1,5 +1,5 @@
 # Exports
-This directory contains the cmdlets *exported by* `Az.BillingBenefits`. No other cmdlets in this repository are directly exported. What that means is the `Az.BillingBenefits` module will run [Export-ModuleMember](https://docs.microsoft.com/powershell/module/microsoft.powershell.core/export-modulemember) on the cmldets in this directory. The cmdlets in this directory are generated at **build-time**. Do not put any custom code, files, cmdlets, etc. into this directory. Please use `..\custom` for all custom implementation.
+This directory contains the cmdlets *exported by* `Az.BillingBenefits`. No other cmdlets in this repository are directly exported. What that means is the `Az.BillingBenefits` module will run [Export-ModuleMember](https://learn.microsoft.com/powershell/module/microsoft.powershell.core/export-modulemember) on the cmldets in this directory. The cmdlets in this directory are generated at **build-time**. Do not put any custom code, files, cmdlets, etc. into this directory. Please use `..\custom` for all custom implementation.
 
 ## Info
 - Modifiable: no

src/BillingBenefits/how-to.md

@@ -14,7 +14,7 @@ To generate documentation, the process is now integrated into the `build-module.
 To test the cmdlets, we use [Pester](https://github.com/pester/Pester). Tests scripts (`.ps1`) should be added to the `test` folder. To execute the Pester tests, run the `test-module.ps1` script. This will run all tests in `playback` mode within the `test` folder. To read more about testing cmdlets, look at the [README.md](examples/README.md) in the `examples` folder.
 
 ## Packing `Az.BillingBenefits`
-To pack `Az.BillingBenefits` for distribution, run the `pack-module.ps1` script. This will take the contents of multiple directories and certain root-folder files to create a `.nupkg`. The structure of the `.nupkg` is created so it can be loaded part of a [PSRepository](https://docs.microsoft.com/powershell/module/powershellget/register-psrepository). Additionally, this package is in a format for distribution to the [PSGallery](https://www.powershellgallery.com/). For signing an Azure module, please contact the [Azure PowerShell](https://github.com/Azure/azure-powershell) team.
+To pack `Az.BillingBenefits` for distribution, run the `pack-module.ps1` script. This will take the contents of multiple directories and certain root-folder files to create a `.nupkg`. The structure of the `.nupkg` is created so it can be loaded part of a [PSRepository](https://learn.microsoft.com/powershell/module/powershellget/register-psrepository). Additionally, this package is in a format for distribution to the [PSGallery](https://www.powershellgallery.com/). For signing an Azure module, please contact the [Azure PowerShell](https://github.com/Azure/azure-powershell) team.
 
 ## Module Script Details
 There are multiple scripts created for performing different actions for developing `Az.BillingBenefits`.

src/BillingBenefits/internal/README.md

@@ -8,7 +8,7 @@ This directory contains a module to handle *internal only* cmdlets. Cmdlets that
 - Packaged: yes
 
 ## Details
-The `Az.BillingBenefits.internal.psm1` file is generated to this folder. This module file handles the hidden cmdlets. These cmdlets will not be exported by `Az.BillingBenefits`. Instead, this sub-module is imported by the `..\custom\Az.BillingBenefits.custom.psm1` module, allowing you to use hidden cmdlets in your custom, exposed cmdlets. To call these cmdlets in your custom scripts, simply use [module-qualified calls](https://docs.microsoft.com/powershell/module/microsoft.powershell.core/about/about_command_precedence?view=powershell-6#qualified-names). For example, `Az.BillingBenefits.internal\Get-Example` would call an internal cmdlet named `Get-Example`.
+The `Az.BillingBenefits.internal.psm1` file is generated to this folder. This module file handles the hidden cmdlets. These cmdlets will not be exported by `Az.BillingBenefits`. Instead, this sub-module is imported by the `..\custom\Az.BillingBenefits.custom.psm1` module, allowing you to use hidden cmdlets in your custom, exposed cmdlets. To call these cmdlets in your custom scripts, simply use [module-qualified calls](https://learn.microsoft.com/powershell/module/microsoft.powershell.core/about/about_command_precedence?view=powershell-6#qualified-names). For example, `Az.BillingBenefits.internal\Get-Example` would call an internal cmdlet named `Get-Example`.
 
 ## Purpose
 This allows you to include REST specifications for services that you *do not wish to expose from your module*, but simply want to call within custom cmdlets. For example, if you want to make a custom cmdlet that uses `Storage` services, you could include a simplified `Storage` REST specification that has only the operations you need. When you run the generator and build this module, note the generated `Storage` cmdlets. Then, in your readme configuration, use [cmdlet hiding](https://github.com/Azure/autorest/blob/master/docs/powershell/options.md#cmdlet-hiding-exportation-suppression) on the `Storage` cmdlets and they will *only be exposed to the custom cmdlets* you want to write, and not be exported as part of `Az.BillingBenefits`.

src/Compute/Compute.Autorest/Az.Compute.psm1

@@ -33,7 +33,7 @@
   }
 
   if(-not $accountsModule) {
-    Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. For installation instructions, please see: https://docs.microsoft.com/powershell/azure/install-az-ps" -ErrorAction Stop
+    Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. For installation instructions, please see: https://learn.microsoft.com/powershell/azure/install-az-ps" -ErrorAction Stop
   } elseif (($accountsModule.Version -lt [System.Version]'2.7.5') -and (-not $localAccounts)) {
     Write-Error "`nThis module requires $accountsName version 2.7.5 or greater. An earlier version of Az.Accounts is imported in the current PowerShell session. If you are running test, please try to add the switch '-RegenerateSupportModule' when executing 'test-module.ps1'. Otherwise please open a new PowerShell session and import this module again.`nAdditionally, this error could indicate that multiple incompatible versions of Azure PowerShell modules are installed on your system. For troubleshooting information, please see: https://aka.ms/azps-version-error" -ErrorAction Stop
   }

src/Compute/Compute.Autorest/custom/README.md

@@ -32,7 +32,7 @@ These provide functionality to our HTTP pipeline and other useful features. In s
 ### Attributes
 For processing the cmdlets, we've created some additional attributes:
 - `Microsoft.Azure.PowerShell.Cmdlets.Compute.DescriptionAttribute`
-  - Used in C# cmdlets to provide a high-level description of the cmdlet. This is propagated to reference documentation via [help comments](https://docs.microsoft.com/powershell/module/microsoft.powershell.core/about/about_comment_based_help) in the exported scripts.
+  - Used in C# cmdlets to provide a high-level description of the cmdlet. This is propagated to reference documentation via [help comments](https://learn.microsoft.com/powershell/module/microsoft.powershell.core/about/about_comment_based_help) in the exported scripts.
 - `Microsoft.Azure.PowerShell.Cmdlets.Compute.DoNotExportAttribute`
   - Used in C# and script cmdlets to suppress creating an exported cmdlet at build-time. These cmdlets will *not be exposed* by `Az.Compute`.
 - `Microsoft.Azure.PowerShell.Cmdlets.Compute.InternalExportAttribute`

src/Compute/Compute.Autorest/docs/README.md

@@ -8,4 +8,4 @@ This directory contains the documentation of the cmdlets for the `Az.Compute` mo
 - Packaged: yes
 
 ## Details
-The process of documentation generation loads `Az.Compute` and analyzes the exported cmdlets from the module. It recognizes the [help comments](https://docs.microsoft.com/powershell/module/microsoft.powershell.core/about/about_comment_based_help) that are generated into the scripts in the `..\exports` folder. Additionally, when writing custom cmdlets in the `..\custom` folder, you can use the help comments syntax, which decorate the exported scripts at build-time. The documentation examples are taken from the `..\examples` folder.
+The process of documentation generation loads `Az.Compute` and analyzes the exported cmdlets from the module. It recognizes the [help comments](https://learn.microsoft.com/powershell/module/microsoft.powershell.core/about/about_comment_based_help) that are generated into the scripts in the `..\exports` folder. Additionally, when writing custom cmdlets in the `..\custom` folder, you can use the help comments syntax, which decorate the exported scripts at build-time. The documentation examples are taken from the `..\examples` folder.