[lldb][Docs] Add page about debugging lldb itself (llvm#65332)

We have docs about how to use lldb on other programs, this tells you how
to use lldb on ldlb and lldb-server.

Lacking any Mac experience I've not included any debugserver information
apart from stating it will be similar but not the same.

I plan for this page to include sections on debugging tests and other
things but this initial commit is purely about the two main binaries
involved.

Author: DavidSpickett

lldb/docs/index.rst

@@ -148,6 +148,7 @@ interesting areas to contribute to lldb.
    resources/contributing
    resources/build
    resources/test
+   resources/debugging
    resources/fuzzing
    resources/sbapi
    resources/extensions

lldb/docs/resources/debugging.rst

@@ -0,0 +1,260 @@
+Debugging
+=========
+
+This page details various ways to debug LLDB itself and other LLDB tools. If
+you want to know how to use LLDB in general, please refer to
+:doc:`/use/tutorial`.
+
+As LLDB is generally split into 2 tools, ``lldb`` and ``lldb-server``
+(``debugserver`` on Mac OS), the techniques shown here will not always apply to
+both. With some knowledge of them all, you can mix and match as needed.
+
+In this document we refer to the initial ``lldb`` as the "debugger" and the
+program being debugged as the "inferior".
+
+Building For Debugging
+----------------------
+
+To build LLDB with debugging information add the following to your CMake
+configuration:
+
+::
+
+  -DCMAKE_BUILD_TYPE=Debug \
+  -DLLDB_EXPORT_ALL_SYMBOLS=ON
+
+Note that the ``lldb`` you will use to do the debugging does not itself need to
+have debug information.
+
+Then build as you normally would according to :doc:`/resources/build`.
+
+If you are going to debug in a way that doesn't need debug info (printf, strace,
+etc.) we recommend adding ``LLVM_ENABLE_ASSERTIONS=ON`` to Release build
+configurations. This will make LLDB fail earlier instead of continuing with
+invalid state (assertions are enabled by default for Debug builds).
+
+Debugging ``lldb``
+------------------
+
+The simplest scenario is where we want to debug a local execution of ``lldb``
+like this one:
+
+::
+
+  ./bin/lldb test_program
+
+LLDB is like any other program, so you can use the same approach.
+
+::
+
+  ./bin/lldb -- ./bin/lldb /tmp/test.o
+
+That's it. At least, that's the minimum. There's nothing special about LLDB
+being a debugger that means you can't attach another debugger to it like any
+other program.
+
+What can be an issue is that both debuggers have command line interfaces which
+makes it very confusing which one is which:
+
+::
+
+  (the debugger)
+  (lldb) run
+  Process 1741640 launched: '<...>/bin/lldb' (aarch64)
+  Process 1741640 stopped and restarted: thread 1 received signal: SIGCHLD
+
+  (the inferior)
+  (lldb) target create "/tmp/test.o"
+  Current executable set to '/tmp/test.o' (aarch64).
+
+Another issue is that when you resume the inferior, it will not print the
+``(lldb)`` prompt because as far as it knows it hasn't changed state. A quick
+way around that is to type something that is clearly not a command and hit
+enter.
+
+::
+
+  (lldb) Process 1742266 stopped and restarted: thread 1 received signal: SIGCHLD
+  Process 1742266 stopped
+  * thread #1, name = 'lldb', stop reason = signal SIGSTOP
+      frame #0: 0x0000ffffed5bfbf0 libc.so.6`__GI___libc_read at read.c:26:10
+  (lldb) c
+  Process 1742266 resuming
+  notacommand
+  error: 'notacommand' is not a valid command.
+  (lldb)
+
+You could just remember whether you are in the debugger or the inferior but
+it's more for you to remember, and for interrupt based events you simply may not
+be able to know.
+
+Here are some better approaches. First, you could use another debugger like GDB
+to debug LLDB. Perhaps an IDE like Xcode or Visual Studio Code. Something which
+runs LLDB under the hood so you don't have to type in commands to the debugger
+yourself.
+
+Or you could change the prompt text for the debugger and/or inferior.
+
+::
+
+  $ ./bin/lldb -o "settings set prompt \"(lldb debugger) \"" -- \
+    ./bin/lldb -o "settings set prompt \"(lldb inferior) \"" /tmp/test.o
+  <...>
+  (lldb) settings set prompt "(lldb debugger) "
+  (lldb debugger) run
+  <...>
+  (lldb) settings set prompt "(lldb inferior) "
+  (lldb inferior)
+
+If you want spacial separation you can run the inferior in one terminal then
+attach to it in another. Remember that while paused in the debugger, the inferior
+will not respond to input so you will have to ``continue`` in the debugger
+first.
+
+::
+
+  (in terminal A)
+  $ ./bin/lldb /tmp/test.o
+
+  (in terminal B)
+  $ ./bin/lldb ./bin/lldb --attach-pid $(pidof lldb)
+
+Placing Breakpoints
+*******************
+
+Generally you will want to hit some breakpoint in the inferior ``lldb``. To place
+that breakpoint you must first stop the inferior.
+
+If you're debugging from another window this is done with ``process interrupt``.
+The inferior will stop, you place the breakpoint and then ``continue``. Go back
+to the inferior and input the command that should trigger the breakpoint.
+
+If you are running debugger and inferior in the same window, input ``ctrl+c``
+instead of ``process interrupt`` and then folllow the rest of the steps.
+
+If you are doing this with ``lldb-server`` and find your breakpoint is never
+hit, check that you are breaking in code that is actually run by
+``lldb-server``. There are cases where code only used by ``lldb`` ends up
+linked into ``lldb-server``, so the debugger can break there but the breakpoint
+will never be hit.
+
+Debugging ``lldb-server``
+-------------------------
+
+Note: If you are on MacOS you are likely using ``debugserver`` instead of
+``lldb-server``. The spirit of these instructions applies but the specifics will
+be different.
+
+We suggest you read :doc:`/use/remote` before attempting to debug ``lldb-server``
+as working out exactly what you want to debug requires that you understand its
+various modes and behaviour. While you may not be literally debugging on a
+remote target, think of your host machine as the "remote" in this scenario.
+
+The ``lldb-server`` options for your situation will depend on what part of it
+or mode you are interested in. To work out what those are, recreate the scenario
+first without any extra debugging layers. Let's say we want to debug
+``lldb-server`` during the following command:
+
+::
+
+  $ ./bin/lldb /tmp/test.o
+
+We can treat ``lldb-server`` as we treated ``lldb`` before, running it under
+``lldb``. The equivalent to having ``lldb`` launch the ``lldb-server`` for us is
+to start ``lldb-server`` in the ``gdbserver`` mode.
+
+The following commands recreate that, while debugging ``lldb-server``:
+
+::
+
+  $ ./bin/lldb -- ./bin/lldb-server gdbserver :1234 /tmp/test.o
+  (lldb) target create "./bin/lldb-server"
+  Current executable set to '<...>/bin/lldb-server' (aarch64).
+  <...>
+  Process 1742485 launched: '<...>/bin/lldb-server' (aarch64)
+  Launched '/tmp/test.o' as process 1742586...
+
+  (in another terminal)
+  $ ./bin/lldb /tmp/test.o -o "gdb-remote 1234"
+
+Note that the first ``lldb`` is the one debugging ``lldb-server``. The second
+``lldb`` is debugging ``/tmp/test.o`` and is only used to trigger the
+interesting code path in ``lldb-server``.
+
+This is another case where you may want to layout your terminals in a
+predictable way, or change the prompt of one or both copies of ``lldb``.
+
+If you are debugging a scenario where the ``lldb-server`` starts in ``platform``
+mode, but you want to debug the ``gdbserver`` mode you'll have to work out what
+subprocess it's starting for the ``gdbserver`` part. One way is to look at the
+list of runninng processes and take the command line from there.
+
+In theory it should be possible to use LLDB's
+``target.process.follow-fork-mode`` or GDB's ``follow-fork-mode`` to
+automatically debug the ``gdbserver`` process as it's created. However this
+author has not been able to get either to work in this scenario so we suggest
+making a more specific command wherever possible instead.
+
+Output From ``lldb-server``
+***************************
+
+As ``lldb-server`` often launches subprocesses, output messages may be hidden
+if they are emitted from the child processes.
+
+You can tell it to enable logging using the ``--log-channels`` option. For
+example ``--log-channels "posix ptrace"``. However that is not passed on to the
+child processes.
+
+The same goes for ``printf``. If it's called in a child process you won't see
+the output.
+
+In these cases consider either interactive debugging ``lldb-server`` or
+working out a more specific command such that it does not have to spawn a
+subprocess. For example if you start with ``platform`` mode, work out what
+``gdbserver`` mode process it spawns and run that command instead.
+
+Remote Debugging
+----------------
+
+If you want to debug part of LLDB running on a remote machine, the principals
+are the same but we will have to start debug servers, then attach debuggers to
+those servers.
+
+In the example below we're debugging an ``lldb-server`` ``gdbserver`` mode
+command running on a remote machine.
+
+For simplicity we'll use the same ``lldb-server`` as the debug server
+and the inferior, but it doesn't need to be that way. You can use ``gdbserver``
+(as in, GDB's debug server program) or a system installed ``lldb-server`` if you
+suspect your local copy is not stable. As is the case in many of these
+scenarios.
+
+::
+
+  $ <...>/bin/lldb-server gdbserver 0.0.0.0:54322 -- \
+    <...>/bin/lldb-server gdbserver 0.0.0.0:54321 -- /tmp/test.o
+
+Now we have a debug server listening on port 54322 of our remote (``0.0.0.0``
+means it's listening for external connections). This is where we will connect
+``lldb`` to, to debug the second ``lldb-server``.
+
+To trigger behaviour in the second ``lldb-server``, we will connect a second
+``lldb`` to port 54321 of the remote.
+
+This is the final configuration:
+
+::
+
+  Host                                        | Remote
+  --------------------------------------------|--------------------
+  lldb A debugs lldb-server on port 54322 ->  | lldb-server A
+                                              |  (which runs)
+  lldb B debugs /tmp/test.o on port 54321 ->  |    lldb-server B
+                                              |      (which runs)
+                                              |        /tmp/test.o
+
+You would use ``lldb A`` to place a breakpoint in the code you're interested in,
+then ``lldb B`` to trigger ``lldb-server B`` to go into that code and hit the
+breakpoint. ``lldb-server A`` is only here to let us debug ``lldb-server B``
+remotely.
+