[PhaseOrdering] Update test RUN lines to use -passes="default<O3>" to allow evaluation by DOS batch scripts. NFC.

`-passes='default<O3>'` isn't correctly parsed on DOS, so when update_test_checks.py runs a system call on the opt RUN line, it fails to evaluate properly - use `-passes="default<O3>"` instead.

Author: RKSimon

llvm/test/Transforms/PhaseOrdering/AArch64/extra-unroll-simplifications.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 4
-; RUN: opt -passes='default<O3>' -S %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -S %s | FileCheck %s
 
 target datalayout = "e-m:o-i64:64-i128:128-n32:64-S128"
 target triple = "arm64-apple-macosx11.0.0"

llvm/test/Transforms/PhaseOrdering/AArch64/hoist-runtime-checks.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 4
-; RUN: opt -passes='default<O3>' -S %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -S %s | FileCheck %s
 
 target datalayout = "e-m:o-i64:64-i128:128-n32:64-S128"
 target triple = "arm64-apple-macosx11.0.0"

llvm/test/Transforms/PhaseOrdering/AArch64/hoisting-sinking-required-for-vectorization.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt -passes='default<O3>' -S %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -S %s | FileCheck %s
 
 target triple = "arm64-apple-darwin"
 

llvm/test/Transforms/PhaseOrdering/AArch64/indvars-vectorization.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 4
-; RUN: opt -passes='default<O3>' -S -o - %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -S -o - %s | FileCheck %s
 
 target datalayout = "e-m:o-i64:64-i128:128-n32:64-S128"
 target triple = "arm64-apple-macosx14.0.0"

llvm/test/Transforms/PhaseOrdering/AArch64/loopflatten.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt -passes='default<O3>' -enable-loop-flatten -loop-flatten-cost-threshold=3 -S %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -enable-loop-flatten -loop-flatten-cost-threshold=3 -S %s | FileCheck %s
 
 target datalayout = "e-m:e-i8:8:32-i16:16:32-i64:64-i128:128-n32:64-S128"
 target triple = "aarch64"

llvm/test/Transforms/PhaseOrdering/AArch64/matrix-extract-insert.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt -passes='default<O3>' -enable-matrix -S %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -enable-matrix -S %s | FileCheck %s
 
 target triple = "arm64-apple-ios"
 

llvm/test/Transforms/PhaseOrdering/AArch64/memcpy-constant-size.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 2
-; RUN: opt %s -mtriple=arm64-apple-macosx -passes='default<O3>' -inline-threshold=2 -inline-call-penalty=5 -S | FileCheck %s
+; RUN: opt %s -mtriple=arm64-apple-macosx -passes="default<O3>" -inline-threshold=2 -inline-call-penalty=5 -S | FileCheck %s
 
 declare i64 @llvm.objectsize.i64.p0(ptr, i1, i1, i1)
 declare ptr @__memcpy_chk(ptr, ptr, i64, i64)

llvm/test/Transforms/PhaseOrdering/ARM/arm_add_q7.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt < %s -passes='default<O3>' -S | FileCheck %s
+; RUN: opt < %s -passes="default<O3>" -S | FileCheck %s
 
 target datalayout = "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64"
 target triple = "thumbv8.1m.main-arm-none-eabi"

llvm/test/Transforms/PhaseOrdering/ARM/arm_fill_q7.ll

@@ -1,6 +1,6 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
 ; RUN: opt < %s -O3 -S                                        | FileCheck --check-prefix=OLDPM %s
-; RUN: opt < %s -passes='default<O3>' -S | FileCheck --check-prefix=NEWPM %s
+; RUN: opt < %s -passes="default<O3>" -S | FileCheck --check-prefix=NEWPM %s
 
 target datalayout = "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64"
 target triple = "thumbv6m-none-none-eabi"

llvm/test/Transforms/PhaseOrdering/ARM/arm_mean_q7.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt < %s -passes='default<O3>' -S | FileCheck %s
+; RUN: opt < %s -passes="default<O3>" -S | FileCheck %s
 
 target datalayout = "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64"
 target triple = "thumbv6m-none-none-eabi"

llvm/test/Transforms/PhaseOrdering/ARM/arm_mult_q15.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt < %s -passes='default<O3>' -S | FileCheck %s
+; RUN: opt < %s -passes="default<O3>" -S | FileCheck %s
 
 ; This test after a lot of cleanup should produce pick a tail-predicated 8x
 ; vector loop. The 8x will be more profitable, to pick a VQDMULH.s16 instruction.

llvm/test/Transforms/PhaseOrdering/ARM/mve-floatreduce.ll

@@ -1,6 +1,6 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
 ; RUN: opt < %s -O3 -S                   | FileCheck %s
-; RUN: opt < %s -passes='default<O3>' -S | FileCheck %s
+; RUN: opt < %s -passes="default<O3>" -S | FileCheck %s
 
 target datalayout = "e-m:e-p:32:32-Fi8-i64:64-v128:64:128-a:0:32-n32-S64"
 target triple = "thumbv8.1m.main-none-none-eabi"

llvm/test/Transforms/PhaseOrdering/X86/excessive-unrolling.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt -passes='default<O3>' -unroll-runtime -S %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -unroll-runtime -S %s | FileCheck %s
 
 target datalayout = "e-m:o-p270:32:32-p271:32:32-p272:64:64-i64:64-f80:128-n8:16:32:64-S128"
 target triple = "x86_64-apple-macosx"

llvm/test/Transforms/PhaseOrdering/X86/preserve-access-group.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 5
-; RUN: opt -passes='default<O3>' -S %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -S %s | FileCheck %s
 
 target datalayout = "e-m:e-p270:32:32-p271:32:32-p272:64:64-i64:64-i128:128-f80:128-n8:16:32:64-S128"
 target triple = "x86_64-unknown-linux-gnu"

llvm/test/Transforms/PhaseOrdering/bitfield-bittests.ll

@@ -1,6 +1,6 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
 ; RUN: opt -O3 -S < %s                    | FileCheck %s
-; RUN: opt -passes='default<O3>' -S < %s  | FileCheck %s
+; RUN: opt -passes="default<O3>" -S < %s  | FileCheck %s
 
 ; These are tests that check for set/clear bits in a bitfield based on PR37098:
 ; https://bugs.llvm.org/show_bug.cgi?id=37098

llvm/test/Transforms/PhaseOrdering/dae-dce.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt -S -passes='default<O3>' < %s | FileCheck %s --check-prefixes=CHECK,DEFAULT
+; RUN: opt -S -passes="default<O3>" < %s | FileCheck %s --check-prefixes=CHECK,DEFAULT
 ; RUN: opt -S -passes='lto<O3>' < %s | FileCheck %s --check-prefixes=CHECK,LTO
 
 declare void @llvm.trap()

llvm/test/Transforms/PhaseOrdering/deletion-of-loops-that-became-side-effect-free.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt -passes='default<O3>' -S < %s  | FileCheck %s --check-prefixes=ALL,O3
+; RUN: opt -passes="default<O3>" -S < %s  | FileCheck %s --check-prefixes=ALL,O3
 ; RUN: opt -passes='default<O2>' -S < %s  | FileCheck %s --check-prefixes=ALL,O2
 ; RUN: opt -passes='default<O1>' -S < %s  | FileCheck %s --check-prefixes=ALL,O1
 

llvm/test/Transforms/PhaseOrdering/globalaa-retained.ll

@@ -1,4 +1,4 @@
-; RUN: opt -passes='default<O3>' -S < %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -S < %s | FileCheck %s
 target datalayout = "e-m:e-i64:64-i128:128-n32:64-S128"
 target triple = "aarch64"
 

llvm/test/Transforms/PhaseOrdering/instcombine-sroa-inttoptr.ll

@@ -1,6 +1,6 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
 ; RUN: opt < %s -O3 -S                                        | FileCheck %s
-; RUN: opt < %s -passes='default<O3>' -S | FileCheck %s
+; RUN: opt < %s -passes="default<O3>" -S | FileCheck %s
 
 ; This is based on the following most basic C++ code:
 ;

llvm/test/Transforms/PhaseOrdering/lifetime-sanitizer.ll

@@ -5,7 +5,7 @@
 ; RUN: opt < %s -passes='default<O0>' -S | FileCheck %s --check-prefixes=CHECK,NOOPT
 ; RUN: opt < %s -passes='default<O1>' -S | FileCheck %s --check-prefixes=CHECK,OPT
 ; RUN: opt < %s -passes='default<O2>' -S | FileCheck %s --check-prefixes=CHECK,OPT
-; RUN: opt < %s -passes='default<O3>' -S | FileCheck %s --check-prefixes=CHECK,OPT
+; RUN: opt < %s -passes="default<O3>" -S | FileCheck %s --check-prefixes=CHECK,OPT
 
 declare void @llvm.lifetime.start.p0(i64, ptr nocapture)
 declare void @llvm.lifetime.end.p0(i64, ptr nocapture)

llvm/test/Transforms/PhaseOrdering/loop-rotation-vs-common-code-hoisting.ll

@@ -1,8 +1,8 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt -passes='default<O3>' -rotation-max-header-size=0 -S < %s  | FileCheck %s --check-prefix=HOIST
-; RUN: opt -passes='default<O3>' -rotation-max-header-size=1 -S < %s  | FileCheck %s --check-prefix=HOIST
-; RUN: opt -passes='default<O3>' -rotation-max-header-size=2 -S < %s  | FileCheck %s --check-prefix=ROTATE
-; RUN: opt -passes='default<O3>' -rotation-max-header-size=3 -S < %s  | FileCheck %s --check-prefix=ROTATE
+; RUN: opt -passes="default<O3>" -rotation-max-header-size=0 -S < %s  | FileCheck %s --check-prefix=HOIST
+; RUN: opt -passes="default<O3>" -rotation-max-header-size=1 -S < %s  | FileCheck %s --check-prefix=HOIST
+; RUN: opt -passes="default<O3>" -rotation-max-header-size=2 -S < %s  | FileCheck %s --check-prefix=ROTATE
+; RUN: opt -passes="default<O3>" -rotation-max-header-size=3 -S < %s  | FileCheck %s --check-prefix=ROTATE
 
 ; This example is produced from a very basic C code:
 ;

llvm/test/Transforms/PhaseOrdering/pr32544.ll

@@ -1,6 +1,6 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
 ; RUN: opt -O3 -S < %s                    | FileCheck %s
-; RUN: opt -passes='default<O3>' -S < %s  | FileCheck %s
+; RUN: opt -passes="default<O3>" -S < %s  | FileCheck %s
 
 define void @foo(i1 %which, i32 %a, i32 %b, ptr %result) {
 ; CHECK-LABEL: @foo(

llvm/test/Transforms/PhaseOrdering/pr45682.ll

@@ -1,6 +1,6 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
 ; RUN: opt -O3 -S < %s                    | FileCheck %s
-; RUN: opt -passes='default<O3>' -S < %s  | FileCheck %s
+; RUN: opt -passes="default<O3>" -S < %s  | FileCheck %s
 
 define void @PR45682(i32 %x, i32 %y) {
 ; CHECK-LABEL: @PR45682(

llvm/test/Transforms/PhaseOrdering/pr62311.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
-; RUN: opt < %s -passes='default<O3>' -S | FileCheck %s
+; RUN: opt < %s -passes="default<O3>" -S | FileCheck %s
 
 ; C++ version of test case
 ; #include <x86intrin.h>

llvm/test/Transforms/PhaseOrdering/pr95152.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 5
-; RUN: opt -S -passes='default<O3>' < %s | FileCheck %s
+; RUN: opt -S -passes="default<O3>" < %s | FileCheck %s
 
 ; Make sure that interaction of "writable" with various passes does not
 ; result in the elimination of the store prior to @j().

llvm/test/Transforms/PhaseOrdering/rotate.ll

@@ -1,6 +1,6 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
 ; RUN: opt -O3 -S < %s                    | FileCheck %s
-; RUN: opt -passes='default<O3>' -S < %s  | FileCheck %s
+; RUN: opt -passes="default<O3>" -S < %s  | FileCheck %s
 
 ; This should become a single funnel shift through a combination
 ; of aggressive-instcombine, simplifycfg, and instcombine.

llvm/test/Transforms/PhaseOrdering/simplifycfg-switch-lowering-vs-correlatedpropagation.ll

@@ -1,7 +1,7 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py
 ; RUN: opt -passes='default<O1>' -S < %s | FileCheck %s
 ; RUN: opt -passes='default<O2>' -S < %s | FileCheck %s
-; RUN: opt -passes='default<O3>' -S < %s | FileCheck %s
+; RUN: opt -passes="default<O3>" -S < %s | FileCheck %s
 
 ; We are worse at propagating correlation facts when in select form
 ; as compared to the PHI form, so if we lower switches to early,

llvm/test/Transforms/PhaseOrdering/switch-sext.ll

@@ -1,5 +1,5 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 4
-; RUN: opt -S -passes='default<O3>' < %s | FileCheck %s
+; RUN: opt -S -passes="default<O3>" < %s | FileCheck %s
 
 define i8 @test_switch_with_sext_phi(i8 %code) {
 ; CHECK-LABEL: define noundef i8 @test_switch_with_sext_phi(

llvm/test/Transforms/PhaseOrdering/switch_with_geps.ll

@@ -1,7 +1,7 @@
 ; NOTE: Assertions have been autogenerated by utils/update_test_checks.py UTC_ARGS: --version 3
 ; RUN: opt -S -passes='default<O1>' < %s | FileCheck %s
 ; RUN: opt -S -passes='default<O2>' < %s | FileCheck %s
-; RUN: opt -S -passes='default<O3>' < %s | FileCheck %s
+; RUN: opt -S -passes="default<O3>" < %s | FileCheck %s
 
 target datalayout = "n64"