regulator: dt-bindings: mt6358: Drop *_sshub regulators

The *_sshub regulators are actually alternate configuration interfaces
for their non *_sshub counterparts. They are not separate regulator
outputs. These registers are intended for the companion processor to
use to configure the power rails while the main processor is sleeping.
They are not intended for the main operating system to use.

Since they are not real outputs they shouldn't be modeled separately.
Remove them. Luckily no device tree actually uses them.

Signed-off-by: Chen-Yu Tsai <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Acked-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>

Author: wens

Documentation/devicetree/bindings/regulator/mt6358-regulator.txt

@@ -8,14 +8,14 @@ Documentation/devicetree/bindings/regulator/regulator.txt.
 
 The valid names for regulators are::
 BUCK:
-  buck_vdram1, buck_vcore, buck_vcore_sshub, buck_vpa, buck_vproc11,
-  buck_vproc12, buck_vgpu, buck_vs2, buck_vmodem, buck_vs1
+  buck_vdram1, buck_vcore, buck_vpa, buck_vproc11, buck_vproc12, buck_vgpu,
+  buck_vs2, buck_vmodem, buck_vs1
 LDO:
   ldo_vdram2, ldo_vsim1, ldo_vibr, ldo_vrf12, ldo_vio18, ldo_vusb, ldo_vcamio,
   ldo_vcamd, ldo_vcn18, ldo_vfe28, ldo_vsram_proc11, ldo_vcn28, ldo_vsram_others,
-  ldo_vsram_others_sshub, ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18,
-  ldo_vmch, ldo_vbif28, ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12,
-  ldo_vrf18, ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
+  ldo_vsram_gpu, ldo_vxo22, ldo_vefuse, ldo_vaux18, ldo_vmch, ldo_vbif28,
+  ldo_vsram_proc12, ldo_vcama1, ldo_vemc, ldo_vio28, ldo_va12, ldo_vrf18,
+  ldo_vcn33, ldo_vcama2, ldo_vmc, ldo_vldo28, ldo_vaud28, ldo_vsim2
 
 Example:
 
@@ -346,17 +346,5 @@ Example:
 				regulator-max-microvolt = <3100000>;
 				regulator-enable-ramp-delay = <540>;
 			};
-
-			mt6358_vcore_sshub_reg: buck_vcore_sshub {
-				regulator-name = "vcore_sshub";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1293750>;
-			};
-
-			mt6358_vsram_others_sshub_reg: ldo_vsram_others_sshub {
-				regulator-name = "vsram_others_sshub";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <1293750>;
-			};
 		};
 	};