net_sched: restore "linklayer atm" handling

commit 56b765b ("htb: improved accuracy at high rates")
broke the "linklayer atm" handling.

 tc class add ... htb rate X ceil Y linklayer atm

The linklayer setting is implemented by modifying the rate table
which is send to the kernel.  No direct parameter were
transferred to the kernel indicating the linklayer setting.

The commit 56b765b ("htb: improved accuracy at high rates")
removed the use of the rate table system.

To keep compatible with older iproute2 utils, this patch detects
the linklayer by parsing the rate table.  It also supports future
versions of iproute2 to send this linklayer parameter to the
kernel directly. This is done by using the __reserved field in
struct tc_ratespec, to convey the choosen linklayer option, but
only using the lower 4 bits of this field.

Linklayer detection is limited to speeds below 100Mbit/s, because
at high rates the rtab is gets too inaccurate, so bad that
several fields contain the same values, this resembling the ATM
detect.  Fields even start to contain "0" time to send, e.g. at
1000Mbit/s sending a 96 bytes packet cost "0", thus the rtab have
been more broken than we first realized.

Signed-off-by: Jesper Dangaard Brouer <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Author: netoptimizer

include/net/sch_generic.h

@@ -683,13 +683,19 @@ struct psched_ratecfg {
 	u64	rate_bytes_ps; /* bytes per second */
 	u32	mult;
 	u16	overhead;
+	u8	linklayer;
 	u8	shift;
 };
 
 static inline u64 psched_l2t_ns(const struct psched_ratecfg *r,
 				unsigned int len)
 {
-	return ((u64)(len + r->overhead) * r->mult) >> r->shift;
+	len += r->overhead;
+
+	if (unlikely(r->linklayer == TC_LINKLAYER_ATM))
+		return ((u64)(DIV_ROUND_UP(len,48)*53) * r->mult) >> r->shift;
+
+	return ((u64)len * r->mult) >> r->shift;
 }
 
 extern void psched_ratecfg_precompute(struct psched_ratecfg *r, const struct tc_ratespec *conf);
@@ -700,6 +706,7 @@ static inline void psched_ratecfg_getrate(struct tc_ratespec *res,
 	memset(res, 0, sizeof(*res));
 	res->rate = r->rate_bytes_ps;
 	res->overhead = r->overhead;
+	res->linklayer = (r->linklayer & TC_LINKLAYER_MASK);
 }
 
 #endif

include/uapi/linux/pkt_sched.h

@@ -73,9 +73,17 @@ struct tc_estimator {
 #define TC_H_ROOT	(0xFFFFFFFFU)
 #define TC_H_INGRESS    (0xFFFFFFF1U)
 
+/* Need to corrospond to iproute2 tc/tc_core.h "enum link_layer" */
+enum tc_link_layer {
+	TC_LINKLAYER_UNAWARE, /* Indicate unaware old iproute2 util */
+	TC_LINKLAYER_ETHERNET,
+	TC_LINKLAYER_ATM,
+};
+#define TC_LINKLAYER_MASK 0x0F /* limit use to lower 4 bits */
+
 struct tc_ratespec {
 	unsigned char	cell_log;
-	unsigned char	__reserved;
+	__u8		linklayer; /* lower 4 bits */
 	unsigned short	overhead;
 	short		cell_align;
 	unsigned short	mpu;

net/sched/sch_api.c

@@ -285,6 +285,45 @@ static struct Qdisc_ops *qdisc_lookup_ops(struct nlattr *kind)
 	return q;
 }
 
+/* The linklayer setting were not transferred from iproute2, in older
+ * versions, and the rate tables lookup systems have been dropped in
+ * the kernel. To keep backward compatible with older iproute2 tc
+ * utils, we detect the linklayer setting by detecting if the rate
+ * table were modified.
+ *
+ * For linklayer ATM table entries, the rate table will be aligned to
+ * 48 bytes, thus some table entries will contain the same value.  The
+ * mpu (min packet unit) is also encoded into the old rate table, thus
+ * starting from the mpu, we find low and high table entries for
+ * mapping this cell.  If these entries contain the same value, when
+ * the rate tables have been modified for linklayer ATM.
+ *
+ * This is done by rounding mpu to the nearest 48 bytes cell/entry,
+ * and then roundup to the next cell, calc the table entry one below,
+ * and compare.
+ */
+static __u8 __detect_linklayer(struct tc_ratespec *r, __u32 *rtab)
+{
+	int low       = roundup(r->mpu, 48);
+	int high      = roundup(low+1, 48);
+	int cell_low  = low >> r->cell_log;
+	int cell_high = (high >> r->cell_log) - 1;
+
+	/* rtab is too inaccurate at rates > 100Mbit/s */
+	if ((r->rate > (100000000/8)) || (rtab[0] == 0)) {
+		pr_debug("TC linklayer: Giving up ATM detection\n");
+		return TC_LINKLAYER_ETHERNET;
+	}
+
+	if ((cell_high > cell_low) && (cell_high < 256)
+	    && (rtab[cell_low] == rtab[cell_high])) {
+		pr_debug("TC linklayer: Detected ATM, low(%d)=high(%d)=%u\n",
+			 cell_low, cell_high, rtab[cell_high]);
+		return TC_LINKLAYER_ATM;
+	}
+	return TC_LINKLAYER_ETHERNET;
+}
+
 static struct qdisc_rate_table *qdisc_rtab_list;
 
 struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r, struct nlattr *tab)
@@ -308,6 +347,8 @@ struct qdisc_rate_table *qdisc_get_rtab(struct tc_ratespec *r, struct nlattr *ta
 		rtab->rate = *r;
 		rtab->refcnt = 1;
 		memcpy(rtab->data, nla_data(tab), 1024);
+		if (r->linklayer == TC_LINKLAYER_UNAWARE)
+			r->linklayer = __detect_linklayer(r, rtab->data);
 		rtab->next = qdisc_rtab_list;
 		qdisc_rtab_list = rtab;
 	}

net/sched/sch_generic.c

@@ -909,6 +909,7 @@ void psched_ratecfg_precompute(struct psched_ratecfg *r,
 	memset(r, 0, sizeof(*r));
 	r->overhead = conf->overhead;
 	r->rate_bytes_ps = conf->rate;
+	r->linklayer = (conf->linklayer & TC_LINKLAYER_MASK);
 	r->mult = 1;
 	/*
 	 * The deal here is to replace a divide by a reciprocal one

net/sched/sch_htb.c

@@ -1329,6 +1329,7 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
 	struct htb_sched *q = qdisc_priv(sch);
 	struct htb_class *cl = (struct htb_class *)*arg, *parent;
 	struct nlattr *opt = tca[TCA_OPTIONS];
+	struct qdisc_rate_table *rtab = NULL, *ctab = NULL;
 	struct nlattr *tb[TCA_HTB_MAX + 1];
 	struct tc_htb_opt *hopt;
 
@@ -1350,6 +1351,18 @@ static int htb_change_class(struct Qdisc *sch, u32 classid,
 	if (!hopt->rate.rate || !hopt->ceil.rate)
 		goto failure;
 
+	/* Keeping backward compatible with rate_table based iproute2 tc */
+	if (hopt->rate.linklayer == TC_LINKLAYER_UNAWARE) {
+		rtab = qdisc_get_rtab(&hopt->rate, tb[TCA_HTB_RTAB]);
+		if (rtab)
+			qdisc_put_rtab(rtab);
+	}
+	if (hopt->ceil.linklayer == TC_LINKLAYER_UNAWARE) {
+		ctab = qdisc_get_rtab(&hopt->ceil, tb[TCA_HTB_CTAB]);
+		if (ctab)
+			qdisc_put_rtab(ctab);
+	}
+
 	if (!cl) {		/* new class */
 		struct Qdisc *new_q;
 		int prio;