mm: x86: move _PAGE_SWP_SOFT_DIRTY from bit 7 to bit 1

_PAGE_PSE is used to distinguish between a truly non-present
(_PAGE_PRESENT=0) PMD, and a PMD which is undergoing a THP split and
should be treated as present.

But _PAGE_SWP_SOFT_DIRTY currently uses the _PAGE_PSE bit, which would
cause confusion between one of those PMDs undergoing a THP split, and a
soft-dirty PMD.  Dropping _PAGE_PSE check in pmd_present() does not work
well, because it can hurt optimization of tlb handling in thp split.

Thus, we need to move the bit.

In the current kernel, bits 1-4 are not used in non-present format since
commit 00839ee ("x86/mm: Move swap offset/type up in PTE to work
around erratum").  So let's move _PAGE_SWP_SOFT_DIRTY to bit 1.  Bit 7
is used as reserved (always clear), so please don't use it for other
purpose.

Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Naoya Horiguchi <[email protected]>
Signed-off-by: Zi Yan <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: David Nellans <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Andrea Arcangeli <[email protected]>
Cc: Michal Hocko <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>

Author: Naoya Horiguchi

arch/x86/include/asm/pgtable_64.h

@@ -180,15 +180,21 @@ static inline int pgd_large(pgd_t pgd) { return 0; }
 /*
  * Encode and de-code a swap entry
  *
- * |     ...            | 11| 10|  9|8|7|6|5| 4| 3|2|1|0| <- bit number
- * |     ...            |SW3|SW2|SW1|G|L|D|A|CD|WT|U|W|P| <- bit names
- * | OFFSET (14->63) | TYPE (9-13)  |0|X|X|X| X| X|X|X|0| <- swp entry
+ * |     ...            | 11| 10|  9|8|7|6|5| 4| 3|2| 1|0| <- bit number
+ * |     ...            |SW3|SW2|SW1|G|L|D|A|CD|WT|U| W|P| <- bit names
+ * | OFFSET (14->63) | TYPE (9-13)  |0|0|X|X| X| X|X|SD|0| <- swp entry
  *
  * G (8) is aliased and used as a PROT_NONE indicator for
  * !present ptes.  We need to start storing swap entries above
  * there.  We also need to avoid using A and D because of an
  * erratum where they can be incorrectly set by hardware on
  * non-present PTEs.
+ *
+ * SD (1) in swp entry is used to store soft dirty bit, which helps us
+ * remember soft dirty over page migration
+ *
+ * Bit 7 in swp entry should be 0 because pmd_present checks not only P,
+ * but also L and G.
  */
 #define SWP_TYPE_FIRST_BIT (_PAGE_BIT_PROTNONE + 1)
 #define SWP_TYPE_BITS 5

arch/x86/include/asm/pgtable_types.h

@@ -99,15 +99,15 @@
 /*
  * Tracking soft dirty bit when a page goes to a swap is tricky.
  * We need a bit which can be stored in pte _and_ not conflict
- * with swap entry format. On x86 bits 6 and 7 are *not* involved
- * into swap entry computation, but bit 6 is used for nonlinear
- * file mapping, so we borrow bit 7 for soft dirty tracking.
+ * with swap entry format. On x86 bits 1-4 are *not* involved
+ * into swap entry computation, but bit 7 is used for thp migration,
+ * so we borrow bit 1 for soft dirty tracking.
  *
  * Please note that this bit must be treated as swap dirty page
- * mark if and only if the PTE has present bit clear!
+ * mark if and only if the PTE/PMD has present bit clear!
  */
 #ifdef CONFIG_MEM_SOFT_DIRTY
-#define _PAGE_SWP_SOFT_DIRTY	_PAGE_PSE
+#define _PAGE_SWP_SOFT_DIRTY	_PAGE_RW
 #else
 #define _PAGE_SWP_SOFT_DIRTY	(_AT(pteval_t, 0))
 #endif