fixing short names

Author: jposada202020

.pylintrc

@@ -279,7 +279,7 @@ function-rgx=(([a-z][a-z0-9_]{2,30})|(_[a-z0-9_]*))$
 
 # Good variable names which should always be accepted, separated by a comma
 # good-names=i,j,k,ex,Run,_
-good-names=r,g,b,w,i,j,k,n,x,y,z,ex,ok,Run,_
+good-names=r,g,b,w,i,j,k,n,x,y,z,ex,ok,Run,_,cs
 
 # Include a hint for the correct naming format with invalid-name
 include-naming-hint=no

adafruit_bme280/advanced.py

@@ -325,7 +325,7 @@ class Adafruit_BME280_SPI(Adafruit_BME280_Advanced):
     """Driver for BME280 connected over SPI
 
     :param ~busio.SPI spi: SPI device
-    :param ~digitalio.DigitalInOut chip_select: Chip Select
+    :param ~digitalio.DigitalInOut cs: Chip Select
     :param int baudrate: Clock rate, default is 100000. Can be changed with :meth:`baudrate`
 
     .. note::
@@ -347,9 +347,9 @@ class Adafruit_BME280_SPI(Adafruit_BME280_Advanced):
 
     .. code-block:: python
 
-        chip_select = digitalio.DigitalInOut(board.D10)
+        cs = digitalio.DigitalInOut(board.D10)
         spi = board.SPI()
-        bme280 = adafruit_bme280.Adafruit_BME280_SPI(spi, chip_select)
+        bme280 = adafruit_bme280.Adafruit_BME280_SPI(spi, cs)
 
     You need to setup the pressure at sea level
 
@@ -369,7 +369,5 @@ class Adafruit_BME280_SPI(Adafruit_BME280_Advanced):
 
     """
 
-    def __init__(
-        self, spi: SPI, chip_select: DigitalInOut, baudrate: int = 100000
-    ) -> None:
-        super().__init__(SPI_Impl(spi, chip_select, baudrate))
+    def __init__(self, spi: SPI, cs: DigitalInOut, baudrate: int = 100000) -> None:
+        super().__init__(SPI_Impl(spi, cs, baudrate))

adafruit_bme280/basic.py

@@ -373,7 +373,7 @@ class Adafruit_BME280_SPI(Adafruit_BME280):
     """Driver for BME280 connected over SPI
 
     :param ~busio.SPI spi: SPI device
-    :param ~digitalio.DigitalInOut chip_select: Chip Select
+    :param ~digitalio.DigitalInOut cs: Chip Select
     :param int baudrate: Clock rate, default is 100000. Can be changed with :meth:`baudrate`
 
     .. note::
@@ -395,9 +395,9 @@ class Adafruit_BME280_SPI(Adafruit_BME280):
 
         .. code-block:: python
 
-            chip_select = digitalio.DigitalInOut(board.D10)
+            cs = digitalio.DigitalInOut(board.D10)
             spi = board.SPI()
-            bme280 = adafruit_bme280.Adafruit_BME280_SPI(spi, chip_select)
+            bme280 = adafruit_bme280.Adafruit_BME280_SPI(spi, cs)
 
         You need to setup the pressure at sea level
 
@@ -417,7 +417,5 @@ class Adafruit_BME280_SPI(Adafruit_BME280):
 
     """
 
-    def __init__(
-        self, spi: SPI, chip_select: DigitalInOut, baudrate: int = 100000
-    ) -> None:
-        super().__init__(SPI_Impl(spi, chip_select, baudrate))
+    def __init__(self, spi: SPI, cs: DigitalInOut, baudrate: int = 100000) -> None:
+        super().__init__(SPI_Impl(spi, cs, baudrate))

adafruit_bme280/protocol.py

@@ -37,14 +37,14 @@ class SPI_Impl:
     def __init__(
         self,
         spi: SPI,
-        chip_select: DigitalInOut,
+        cs: DigitalInOut,
         baudrate: int = 100000,
     ) -> None:
         from adafruit_bus_device import (  # pylint: disable=import-outside-toplevel
             spi_device,
         )
 
-        self._spi = spi_device.SPIDevice(spi, chip_select, baudrate=baudrate)
+        self._spi = spi_device.SPIDevice(spi, cs, baudrate=baudrate)
 
     def read_register(self, register: int, length: int) -> bytearray:
         "Read from the device register."