Merge pull request #743 from makermelissa/master

Add missing boards from CP 7.0.0-Beta0

Author: ladyada

_blinka/beaglev_starlight.md

@@ -0,0 +1,31 @@
+---
+layout: download
+board_id: "beaglev_starlight"
+title: "BeagleV Starlight Beta Prototype Download"
+name: "BeagleV Starlight Beta Prototype"
+manufacturer: "BeagleV"
+board_url: "https://github.com/beagleboard/beaglev-starlight#readme"
+board_image: "beaglev_starlight.jpg"
+downloads_display: true
+blinka: true
+date_added: 2021-7-17
+features:
+  - Ethernet
+  - HDMI
+  - USB 3.0
+  - 40-pin GPIO
+---
+
+**The BeagleV™ - Starlight project has concluded and no units beyond the beta prototypes will be produced. This design was never sold as a product.**
+
+[BeagleV Starlight](https://beagleboard.org/beaglev) is a Linux-capable RISC-V 64-bit dev board.
+
+A [beta prototype version](https://wiki.seeedstudio.com/BeagleV-Getting-Started/#faq) was sent to a limited number of upstream developers for software enablement.  This beta prototype used the StarFive JH7100 SoC.
+
+
+## Learn More
+* [GitHub](https://github.com/beagleboard/beaglev-starlight#readme)
+
+## Contribute
+
+Have some info to add for this board? Edit the source for this page [here](https://github.com/adafruit/circuitpython-org/edit/master/_blinka/{{ page.board_id }}.md).

_board/ai_thinker_esp_12k_nodemcu.md

@@ -0,0 +1,31 @@
+---
+layout: download
+board_id: "ai_thinker_esp_12k_nodemcu"
+title: "NodeMCU ESP-12K Download"
+name: "NodeMCU ESP-12K"
+manufacturer: "Ai-Thinker"
+board_url: "https://docs.ai-thinker.com/en/12k_development_board_esp32-s2"
+board_image: "ai_thinker_esp_12k_nodemcu.jpg"
+date_added: 2021-8-24
+features:
+  - Breadboard-Friendly
+  - Wi-Fi
+---
+This board is a version of the NodeMCU board with an ESP-12K (ESP32-S2) module on it. The board has a micro USB connection with which it can be programmed and/or powered (micro USB cable not included).
+
+Specifications:
+- Supply voltage:
+  - Micro USB: 5V DC
+  - 5V pin: 5V DC
+  - 3V3 pin: 3.3V DC
+- GPIO voltage: 3.3V
+- Chip: ESP32-S2 ESP-12K
+  - Flash memory: 4MB
+  - PSRAM: 8MB
+  - SRAM: 320KB
+  - Built-in Wi-Fi
+- USB to serial converter: CH340C
+
+## Purchase
+
+* [Tinytronics](https://www.tinytronics.nl/shop/en/development-boards/microcontroller-boards/with-wi-fi/ai-thinker-nodemcu-32-s2-esp-12k)

_board/morpheans_morphesp-240.md

@@ -0,0 +1,32 @@
+---
+layout: download
+board_id: "morpheans_morphesp-240"
+title: "MorphESP 240 Download"
+name: "MorphESP 240"
+manufacturer: "Morpheans"
+board_url: "https://github.com/ccadic/ESP32-S2-DevBoardTFT"
+board_image: "morpheans_morphesp-240.jpg"
+date_added: 2021-8-24
+features:
+  - Display
+  - Wi-Fi
+---
+
+While there are many ESP32 dev boards on the market, we here at [Morpheans](http://www.morpheans.com/) found ourselves lamenting the scarcity of such boards for the new ESP32-*S2*. So we decided to build one. **Introducing MorphESP 240, an easy-to-use, Arduino- and CircuitPython-compatible, open hardware ESP32-S2 dev board with a built-in high-resolution, IPS-color display.**
+
+Our target was *minimalism with room to grow*, and—after squeezing the following specs into a 20 g, 89 x 28 x 6 mm package—we believe we’ve hit the bullseye:
+
+- An ESP32-S2 WROOM with
+  - A 240 MHz single-core microcontroller
+  - 128 KB of ROM
+  - 320 KB of SRAM
+  - 802.11 b/g/n/ 2.4 GHz Wi-Fi
+- An on-board, SPI-driven, 240 x 240 pixel ST7789 display
+- A classic, multi-color WS2812B RGB LED
+- A built-in, JST-connected battery with a USB charging module
+- A 5 V to 3.3 V regulator to feed additional modules
+- Plenty of GPIOs to play with
+
+## Purchase
+
+* [Crowd Supply](https://www.crowdsupply.com/morpheans/morphesp-240)

_board/odt_pixelwing_esp32_s2.md

@@ -0,0 +1,24 @@
+---
+layout: download
+board_id: "odt_pixelwing_esp32_s2"
+title: "PixelWing ESP32-S2 RGB Matrix Download"
+name: "PixelWing ESP32-S2 RGB Matrix"
+manufacturer: "Oak Development Technologies"
+board_url: "https://www.tindie.com/products/oakdevtech/pixelwing-esp32-s2-rgb-matrix/"
+board_image: "odt_pixelwing_esp32_s2.jpg"
+date_added: 2021-8-24
+features:
+  - Wi-Fi
+  - STEMMA QT/QWIIC
+  - USB-C
+---
+
+The PixelWing Matrix is a powerful ESP32-S2 RGB Matrix Display board that allows you to make a simple connected display, data logger, or environmental indicator. The PixelWing features USB-C power, a 5x10 RGB Matrix Display using SK6812mini Addressable LEDs that are compatible with Adafruit NEOPIXEL Libraries!
+
+In addition to this, the PixelWing provides a quick access I2C JST connector that is compatible with Qwiic and Stemma QT connectors allowing you to connect all your favorite Adafruit and Sparkfun sensor breakouts.
+
+All of this is combined with Circuit Python support making it easy to get programming on your project.
+
+## Purchase
+
+* [Tindie](https://www.tindie.com/products/oakdevtech/pixelwing-esp32-s2-rgb-matrix/)

_board/pimoroni_interstate75.md

@@ -0,0 +1,13 @@
+---
+layout: download
+board_id: "pimoroni_interstate75"
+title: "Pimoroni Interstate 75 Download"
+name: "Pimoroni Interstate 75"
+manufacturer: "Pimoroni"
+board_url: "https://pimoroni.com/i75"
+board_image: "unknown.jpg"
+date_added: 2021-8-24
+downloads_display: false
+---
+
+Oops! Looks like we don't know anything about this board. This means it's likely very new.