Add missing boards for CP 9.0.0-alpha.5

Author: makermelissa

_board/heltec_esp32s3_wifi_lora_v3.md

@@ -0,0 +1,36 @@
+---
+layout: download
+board_id: "heltec_esp32s3_wifi_lora_v3"
+title: "WiFi LoRa 32 V3 Download"
+name: "WiFi LoRa 32 V3"
+manufacturer: "Heltec Automation"
+board_url: "https://heltec.org/project/wifi-lora-32-v3/"
+board_image: "heltec_esp32s3_wifi_lora_v3.jpg"
+date_added: 2023-11-15
+family: esp32s3
+features:
+  - Display
+  - Bluetooth/BTLE
+  - Battery Charging
+  - LoRa/Radio
+---
+
+WiFi LoRa 32 is a classic IoT dev-board designed & produced by Heltec Automation. Since its launch in 2017, it has been loved by developers and makers. The newly launched V3 version has the same pin sequence as the V2 version and retains Wi-Fi, BLE, LoRa, OLED display, and other functions.
+
+It is the best option for smart cities, farms, homes, industrial control, house security, wireless meter reading, and IoT developers.
+
+#### WiFi LoRa 32 （V3） is a part of the “Heltec LoRa“ series, with the following features
+
+- Microprocessor: ESP32-S3FN8 (Xtensa® 32-bit LX7 dual-core processor, five-stage pipeline rack Structure, frequency up to 240 MHz).
+- SX1262 LoRa node chip.
+- Type-C USB interface with a complete voltage regulator, ESD protection, short circuit protection, RF shielding, and other protection measures.
+- Onboard SH1.25-2 battery interface, integrated lithium battery management system (charge and discharge management, overcharge protection, battery power detection, USB / battery power automatic switching).
+- Integrated WiFi, LoRa, Bluetooth three network connections, onboard Wi-Fi, Bluetooth dedicated 2.4GHz metal spring antenna, reserved IPEX (U.FL) interface for LoRa use.
+- Onboard 0.96-inch 128*64 dot matrix OLED display can be used to display debugging information, battery power, and other information.
+- Integrated CP2102 USB to serial port chip, convenient for program downloading, and debugging information printing.
+- Support the[ Arduino development environment](https://heltec.org/wifi_kit_install/).
+- With good RF circuit design and low-power design.
+
+## Purchase
+
+* [Heltec Automation Store](https://heltec.org/project/wifi-lora-32-v3/)

_board/maple_elite_pi.md

@@ -0,0 +1,40 @@
+---
+layout: download
+board_id: "maple_elite_pi"
+title: "Maple Elite-Pi Download"
+name: "Maple Elite-Pi"
+manufacturer: "Maple"
+board_url: ""
+board_image: "maple_elite_pi.jpg"
+date_added: 2023-11-15
+family: raspberrypi
+features:
+  - USB-C
+  - Breadboard-Friendly
+---
+
+The Elite-Pi is an RP2040-based controller with a Pro Micro/Elite-C compatible pinout that's primarily intended for use with keyboards.
+
+### Features
+
+- Compatible with Pro Micro-based PCBs
+- Mid-Mount USB-C port for low profile
+- RP2040 microcontroller
+- Flash Memory: 16Mbit (W25Q16JVUXIQ)
+- Up to 25 I/O pins available
+- USB D+/D- accessible via pads
+- On-board boot and run/reset buttons
+- 1.6mm thick PCB
+- Comes with two 12-pin headers and one 5-pin header
+- Firmware Support: QMK, KMK, CircuitPython
+
+In comparison to the Pro Micro or Elite-C, the Elite-Pi provides a few advantages over them:
+
+- Flash memory: Lots of space to compile in various QMK features without worry, as the Elite-Pi has much more flash memory
+- Price: Since the RP2040 microcontroller costs less than the ATmega32u4, we can provide it at a lower price than the Elite-C
+- Flashing: Instead of using QMK Toolbox, you can just copy a complied .uf2 file to the Elite-Pi to update the firmware
+
+
+## Purchase
+
+* [Keeb.io](https://keeb.io/products/elite-pi-usb-c-pro-micro-replacement-rp2040)

_board/oxocard_artwork.md

@@ -0,0 +1,31 @@
+---
+layout: download
+board_id: "oxocard_artwork"
+title: "Oxocard Artwork Card Download"
+name: "Oxocard Artwork Card"
+manufacturer: "Oxocard"
+board_url: "https://oxocard.ch/en/artwork/"
+board_image: "oxocard_artwork.jpg"
+date_added: 2023-11-15
+family: esp32
+features:
+  - Wi-Fi
+  - USB-C
+  - Bluetooth/BTLE
+  - Display
+  - Speaker
+---
+
+The Oxocard Artwork is an interactive, programmable minicomputer with powerful hardware in credit card format.
+
+The new Oxocard-Artwork consists of a high quality computer board where you can see what's "inside". The powerful dual-core chip ESP32 with 2MB RAM and 8MB Flash provide you with enough power for your experiments.
+
+Algorithmic art for beginners Learn in a short time how to create impressive visual effects as we know them from games and movies.
+
+The Oxocard Artwork is used with the scripting language Oxoscript programmed. It was specially designed for computer graphics and -games developed and is for beginners particularly suitable.
+
+Thanks to ready-made programs you can get started immediately even without programming experience. We show you how you can create amazing effects with simple adjustments.
+
+## Purchase
+
+* [OXON](https://shop.oxon.ch/?shop=oxocard)

_board/oxocard_connect.md

@@ -0,0 +1,30 @@
+---
+layout: download
+board_id: "oxocard_connect"
+title: "Oxocard Connect Card Download"
+name: "Oxocard Connect Card"
+manufacturer: "Oxocard"
+board_url: "https://oxocard.ch/en/connect/"
+board_image: "oxocard_connect.jpg"
+date_added: 2023-11-15
+family: esp32
+features:
+  - Wi-Fi
+  - USB-C
+  - Bluetooth/BTLE
+  - Display
+---
+
+The Oxocard Connect is a small experimental computer in which you can plug in ready-made or self-soldered circuit boards. As you know it from game consoles, it then goes off immediately.
+
+Choose from a variety of ready-made cartridges, plug them into the CONNECT and immediately a sample application will start showing you how to use the cartridge. No computer, no software installation and no wiring required.
+
+Experiment with electronic circuits now - without the need for a computer. Enter the fascinating world of circuit design. Learn how LEDs, servos, light sensors and much more work.
+
+Gone are the days when you had to buy a controller again for every electronics project. With the Oxocard CONNECT you can easily change projects by inserting the appropriate cartridge.
+
+The circuit design of the cartridges is OPEN SOURCE and OPEN HARDWARE. Create your own cartridges for the Connect or use the cartridges with other microcontrollers.
+
+## Purchase
+
+* [OXON](https://shop.oxon.ch/?shop=oxocard)

_board/oxocard_galaxy.md

@@ -0,0 +1,31 @@
+---
+layout: download
+board_id: "oxocard_galaxy"
+title: "Oxocard Galaxy Card Download"
+name: "Oxocard Galaxy Card"
+manufacturer: "Oxocard"
+board_url: "https://oxocard.ch/en/galaxy/"
+board_image: "oxocard_galaxy.jpg"
+date_added: 2023-11-15
+family: esp32
+features:
+  - Wi-Fi
+  - USB-C
+  - Bluetooth/BTLE
+  - Display
+  - Speaker
+---
+
+The new Oxocard-Galaxy consists of a high quality computer board, on which you see, what «inside» is. The powerful Dual-Core-Chip ESP32 with 2MB RAM and 8MB Flash provide you enough Power for your experiments.
+
+The games and animations are immediately executable. The complete source code is at your disposal and you can customize everything.
+
+The Oxocard Galaxy is used with the scripting language Oxoscript programmed. It was specially designed for computer graphics and -games developed and is for beginners particularly suitable.
+
+Thanks to ready-made programs you can get started immediately even without programming experience. We show you how you can create amazing effects with simple adjustments.
+
+With the new pedagogical concept «Use-Modify-Create» we start with ready-made programs, which are adapted by means of instructions. This leads to faster results and increases the motivation to learn.
+
+## Purchase
+
+* [OXON](https://shop.oxon.ch/?shop=oxocard)

_board/oxocard_science.md

@@ -0,0 +1,37 @@
+---
+layout: download
+board_id: "oxocard_science"
+title: "Oxocard Science Card Download"
+name: "Oxocard Science Card"
+manufacturer: "Oxocard"
+board_url: "https://oxocard.ch/en/science/"
+board_image: "oxocard_science.jpg"
+date_added: 2023-11-15
+family: esp32
+features:
+  - Wi-Fi
+  - USB-C
+  - Bluetooth/BTLE
+  - Display
+  - Speaker
+---
+
+This programmable multi-sensor board measures light/IR, temperature, noise, humidity, pressure and volatile compounds (VoC, eCO2 and ethanol). It comes with ready-to-use programs with documented source code, so you can start your own experiments right away.
+
+The seven built-in environmental sensors provide twelve sensor values that you can experiment with. Use the built-in programs, modify them or write your own code.
+
+We only perceive a small part of the environment with our senses. Impressive examples show you more about how to make the invisible visible. The card comes with over ten examples and small games - all with full source code and tutorials - that you can experiment with right away, even without programming.
+
+Be amazed by impressive animations that show you how to simulate life. Bounce balls that move when you move the map.
+
+On the board, which is only the size of a credit card, you'll find a high-resolution screen, five buttons, seven sensors and a powerful computer chip that you can program directly via a browser.
+
+The Oxocard is programmed with the scripting language Oxoscript. This was optimized especially for small computers and is particularly suitable for beginners, since it contains many powerful commands from sensor technology, computer graphics and animation.
+
+Thanks to ready-made programs, you can get started right away even without programming experience. We'll show you how to create amazing effects with simple adjustments.
+
+With the pedagogical concept «Use-Modify-Create» starten wir mit fixfertigen Programmen, we start with ready-to-use programs that are adapted by means of instructions. This leads to faster results and increases the motivation to learn.
+
+## Purchase
+
+* [OXON](https://shop.oxon.ch/?shop=oxocard)

_board/unexpectedmaker_blizzard_s3.md

@@ -6,7 +6,7 @@ name: "Unexpected Maker Blizzard S3"
 manufacturer: "Unexpected Maker"
 board_url: ""
 board_image: "unexpectedmaker_blizzard_s3.jpg"
-date_added: 2023-10-27
+date_added: 2023-11-15
 family: esp32s3
 bootloader_id: unexpectedmaker_blizzard_s3
 features: