Skip to content

Commit 276d425

Browse files
tannewttannewt
authored
Merge pull request #5302 from maholli/pycubed_v05c
updating pycubed firmware for mainboardv05
2 parents 48866dd + f16a475 commit 276d425

File tree

12 files changed

+374
-3
lines changed

12 files changed

+374
-3
lines changed

‎main.c

Lines changed: 12 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -107,6 +107,11 @@
107107
#include "shared-bindings/wifi/__init__.h"
108108
#endif
109109

110+
#if CIRCUITPY_BOOT_COUNTER
111+
#include "shared-bindings/nvm/ByteArray.h"
112+
uint8_t value_out = 0;
113+
#endif
114+
110115
#if MICROPY_ENABLE_PYSTACK
111116
static size_t PLACE_IN_DTCM_BSS(_pystack[CIRCUITPY_PYSTACK_SIZE / sizeof(size_t)]);
112117
#endif
@@ -796,6 +801,13 @@ int __attribute__((used)) main(void) {
796801
// Turn on RX and TX LEDs if we have them.
797802
init_rxtx_leds();
798803

804+
#if CIRCUITPY_BOOT_COUNTER
805+
// Increment counter before possibly entering safe mode
806+
common_hal_nvm_bytearray_get_bytes(&common_hal_mcu_nvm_obj,0,1,&value_out);
807+
++value_out;
808+
common_hal_nvm_bytearray_set_bytes(&common_hal_mcu_nvm_obj,0,&value_out,1);
809+
#endif
810+
799811
// Wait briefly to give a reset window where we'll enter safe mode after the reset.
800812
if (safe_mode == NO_SAFE_MODE) {
801813
safe_mode = wait_for_safe_mode_reset();

‎ports/atmel-samd/boards/pycubed_mram_v05/board.c

Lines changed: 44 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,44 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
#include "supervisor/board.h"
28+
#include "mpconfigboard.h"
29+
#include "common-hal/microcontroller/Pin.h"
30+
#include "hal/include/hal_gpio.h"
31+
#include "shared-bindings/pwmio/PWMOut.h"
32+
33+
void board_init(void) {
34+
pwmio_pwmout_obj_t pwm;
35+
common_hal_pwmio_pwmout_construct(&pwm, &pin_PA23, 4096, 2, false);
36+
common_hal_pwmio_pwmout_never_reset(&pwm);
37+
}
38+
39+
bool board_requests_safe_mode(void) {
40+
return false;
41+
}
42+
43+
void reset_board(void) {
44+
}

‎ports/atmel-samd/boards/pycubed_mram_v05/mpconfigboard.h

Lines changed: 34 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,34 @@
1+
2+
#define MICROPY_HW_BOARD_NAME "PyCubedv05-MRAM"
3+
#define MICROPY_HW_MCU_NAME "samd51j19"
4+
#define CIRCUITPY_MCU_FAMILY samd51
5+
6+
#define MICROPY_HW_NEOPIXEL (&pin_PA21)
7+
8+
// External flash MR2xH40 MRAM
9+
#define EXTERNAL_FLASH_QSPI_SINGLE
10+
#define EXTERNAL_FLASH_NO_JEDEC
11+
12+
#define AUTORESET_DELAY_MS 500
13+
14+
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
15+
16+
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
17+
18+
#define CIRCUITPY_DRIVE_LABEL "PYCUBED"
19+
#define CIRCUITPY_BOOT_COUNTER 1
20+
21+
#define BOARD_HAS_CRYSTAL 1
22+
23+
#define DEFAULT_I2C_BUS_SCL (&pin_PB13)
24+
#define DEFAULT_I2C_BUS_SDA (&pin_PB12)
25+
26+
#define DEFAULT_SPI_BUS_SCK (&pin_PA13)
27+
#define DEFAULT_SPI_BUS_MOSI (&pin_PA12)
28+
#define DEFAULT_SPI_BUS_MISO (&pin_PA14)
29+
30+
#define DEFAULT_UART_BUS_TX (&pin_PB02)
31+
#define DEFAULT_UART_BUS_RX (&pin_PB03)
32+
33+
#define IGNORE_PIN_PA24 1
34+
#define IGNORE_PIN_PA25 1

‎ports/atmel-samd/boards/pycubed_mram_v05/mpconfigboard.mk

Lines changed: 34 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,34 @@
1+
USB_VID = 0x04D8
2+
USB_PID = 0xEC44
3+
USB_PRODUCT = "PyCubed"
4+
USB_MANUFACTURER = "maholli"
5+
6+
CHIP_VARIANT = SAMD51J19A
7+
CHIP_FAMILY = samd51
8+
9+
QSPI_FLASH_FILESYSTEM = 1
10+
EXTERNAL_FLASH_DEVICES = MR2xH40
11+
LONGINT_IMPL = MPZ
12+
13+
CIRCUITPY_ULAB = 1
14+
CIRCUITPY_BINASCII = 1
15+
CIRCUITPY_SDCARDIO = 1
16+
CIRCUITPY_JSON = 1
17+
CIRCUITPY_MSGPACK = 1
18+
19+
# no SAMD51 support... yet ;)
20+
# CIRCUITPY_ALARM = 1
21+
# CIRCUITPY_DUALBANK=1
22+
23+
# Not needed
24+
CIRCUITPY_AUDIOBUSIO = 0
25+
CIRCUITPY_DISPLAYIO = 0
26+
CIRCUITPY_FRAMEBUFFERIO = 0
27+
CIRCUITPY_KEYPAD = 0
28+
CIRCUITPY_RGBMATRIX = 0
29+
CIRCUITPY_PS2IO = 0
30+
CIRCUITPY_BLEIO_HCI=0
31+
CIRCUITPY_BLEIO=0
32+
33+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
34+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Register

‎ports/atmel-samd/boards/pycubed_mram_v05/pins.c

Lines changed: 63 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,63 @@
1+
#include "shared-bindings/board/__init__.h"
2+
#include "supervisor/board.h"
3+
4+
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
5+
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
6+
7+
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA13) },
8+
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA12) },
9+
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA14) },
10+
{ MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PA27) },
11+
12+
{ MP_ROM_QSTR(MP_QSTR_RELAY_A), MP_ROM_PTR(&pin_PB15) },
13+
{ MP_ROM_QSTR(MP_QSTR_BURN1), MP_ROM_PTR(&pin_PB31) },
14+
{ MP_ROM_QSTR(MP_QSTR_BURN2), MP_ROM_PTR(&pin_PA15) },
15+
16+
{ MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_PA02) },
17+
{ MP_ROM_QSTR(MP_QSTR_EN_RF), MP_ROM_PTR(&pin_PA04) },
18+
{ MP_ROM_QSTR(MP_QSTR_AIN5), MP_ROM_PTR(&pin_PA05) },
19+
{ MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_PA06) },
20+
{ MP_ROM_QSTR(MP_QSTR_L1PROG), MP_ROM_PTR(&pin_PA07) },
21+
22+
{ MP_ROM_QSTR(MP_QSTR_CHRG), MP_ROM_PTR(&pin_PB08) },
23+
{ MP_ROM_QSTR(MP_QSTR_PA16), MP_ROM_PTR(&pin_PA16) },
24+
{ MP_ROM_QSTR(MP_QSTR_PA17), MP_ROM_PTR(&pin_PA17) },
25+
{ MP_ROM_QSTR(MP_QSTR_VBUS_RST), MP_ROM_PTR(&pin_PA18) },
26+
{ MP_ROM_QSTR(MP_QSTR_PA19), MP_ROM_PTR(&pin_PA19) },
27+
{ MP_ROM_QSTR(MP_QSTR_PA20), MP_ROM_PTR(&pin_PA20) },
28+
{ MP_ROM_QSTR(MP_QSTR_PA22), MP_ROM_PTR(&pin_PA22) },
29+
{ MP_ROM_QSTR(MP_QSTR_PB16), MP_ROM_PTR(&pin_PB16) },
30+
{ MP_ROM_QSTR(MP_QSTR_PB17), MP_ROM_PTR(&pin_PB17) },
31+
{ MP_ROM_QSTR(MP_QSTR_PB22), MP_ROM_PTR(&pin_PB22) },
32+
{ MP_ROM_QSTR(MP_QSTR_PB23), MP_ROM_PTR(&pin_PB23) },
33+
34+
{ MP_ROM_QSTR(MP_QSTR_RF1_RST), MP_ROM_PTR(&pin_PB00) },
35+
{ MP_ROM_QSTR(MP_QSTR_RF1_CS), MP_ROM_PTR(&pin_PB30) },
36+
{ MP_ROM_QSTR(MP_QSTR_RF1_IO4), MP_ROM_PTR(&pin_PB04) },
37+
{ MP_ROM_QSTR(MP_QSTR_RF1_IO0), MP_ROM_PTR(&pin_PB05) },
38+
39+
{ MP_ROM_QSTR(MP_QSTR_RF2_IO0), MP_ROM_PTR(&pin_PB06) },
40+
{ MP_ROM_QSTR(MP_QSTR_RF2_IO4), MP_ROM_PTR(&pin_PB07) },
41+
{ MP_ROM_QSTR(MP_QSTR_RF2_CS), MP_ROM_PTR(&pin_PB09) },
42+
{ MP_ROM_QSTR(MP_QSTR_RF2_RST), MP_ROM_PTR(&pin_PB14) },
43+
44+
{ MP_ROM_QSTR(MP_QSTR_EN_GPS), MP_ROM_PTR(&pin_PB01) },
45+
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB02) },
46+
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB03) },
47+
{ MP_ROM_QSTR(MP_QSTR_TX2), MP_ROM_PTR(&pin_PA17) },
48+
{ MP_ROM_QSTR(MP_QSTR_RX2), MP_ROM_PTR(&pin_PA16) },
49+
50+
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB12) },
51+
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB13) },
52+
{ MP_ROM_QSTR(MP_QSTR_SCL2), MP_ROM_PTR(&pin_PA16) },
53+
{ MP_ROM_QSTR(MP_QSTR_SDA2), MP_ROM_PTR(&pin_PA17) },
54+
55+
{ MP_ROM_QSTR(MP_QSTR_WDT_WDI), MP_ROM_PTR(&pin_PA23) },
56+
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA21) },
57+
58+
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
59+
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
60+
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
61+
62+
};
63+
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

‎ports/atmel-samd/boards/pycubed_v05/board.c

Lines changed: 44 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,44 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
#include "supervisor/board.h"
28+
#include "mpconfigboard.h"
29+
#include "common-hal/microcontroller/Pin.h"
30+
#include "hal/include/hal_gpio.h"
31+
#include "shared-bindings/pwmio/PWMOut.h"
32+
33+
void board_init(void) {
34+
pwmio_pwmout_obj_t pwm;
35+
common_hal_pwmio_pwmout_construct(&pwm, &pin_PA23, 4096, 2, false);
36+
common_hal_pwmio_pwmout_never_reset(&pwm);
37+
}
38+
39+
bool board_requests_safe_mode(void) {
40+
return false;
41+
}
42+
43+
void reset_board(void) {
44+
}

‎ports/atmel-samd/boards/pycubed_v05/mpconfigboard.h

Lines changed: 33 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,33 @@
1+
2+
#define MICROPY_HW_BOARD_NAME "PyCubedv05"
3+
#define MICROPY_HW_MCU_NAME "samd51j19"
4+
#define CIRCUITPY_MCU_FAMILY samd51
5+
6+
#define MICROPY_HW_NEOPIXEL (&pin_PA21)
7+
8+
#define AUTORESET_DELAY_MS 500
9+
10+
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
11+
12+
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
13+
14+
// External flash W25Q80DV
15+
#define EXTERNAL_FLASH_QSPI_DUAL
16+
17+
#define CIRCUITPY_DRIVE_LABEL "PYCUBED"
18+
#define CIRCUITPY_BOOT_COUNTER 1
19+
20+
#define BOARD_HAS_CRYSTAL 1
21+
22+
#define DEFAULT_I2C_BUS_SCL (&pin_PB13)
23+
#define DEFAULT_I2C_BUS_SDA (&pin_PB12)
24+
25+
#define DEFAULT_SPI_BUS_SCK (&pin_PA13)
26+
#define DEFAULT_SPI_BUS_MOSI (&pin_PA12)
27+
#define DEFAULT_SPI_BUS_MISO (&pin_PA14)
28+
29+
#define DEFAULT_UART_BUS_TX (&pin_PB02)
30+
#define DEFAULT_UART_BUS_RX (&pin_PB03)
31+
32+
#define IGNORE_PIN_PA24 1
33+
#define IGNORE_PIN_PA25 1

‎ports/atmel-samd/boards/pycubed_v05/mpconfigboard.mk

Lines changed: 35 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,35 @@
1+
USB_VID = 0x04D8
2+
USB_PID = 0xEC44
3+
USB_PRODUCT = "PyCubed"
4+
USB_MANUFACTURER = "maholli"
5+
6+
CHIP_VARIANT = SAMD51J19A
7+
CHIP_FAMILY = samd51
8+
9+
QSPI_FLASH_FILESYSTEM = 1
10+
EXTERNAL_FLASH_DEVICE_COUNT = 1
11+
EXTERNAL_FLASH_DEVICES = W25Q80DV
12+
LONGINT_IMPL = MPZ
13+
14+
CIRCUITPY_ULAB = 1
15+
CIRCUITPY_BINASCII = 1
16+
CIRCUITPY_SDCARDIO = 1
17+
CIRCUITPY_JSON = 1
18+
CIRCUITPY_MSGPACK = 1
19+
20+
# no SAMD51 support... yet ;)
21+
# CIRCUITPY_ALARM = 1
22+
# CIRCUITPY_DUALBANK=1
23+
24+
# Not needed
25+
CIRCUITPY_AUDIOBUSIO = 0
26+
CIRCUITPY_DISPLAYIO = 0
27+
CIRCUITPY_FRAMEBUFFERIO = 0
28+
CIRCUITPY_KEYPAD = 0
29+
CIRCUITPY_RGBMATRIX = 0
30+
CIRCUITPY_PS2IO = 0
31+
CIRCUITPY_BLEIO_HCI=0
32+
CIRCUITPY_BLEIO=0
33+
34+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_NeoPixel
35+
FROZEN_MPY_DIRS += $(TOP)/frozen/Adafruit_CircuitPython_Register

‎ports/atmel-samd/boards/pycubed_v05/pins.c

Lines changed: 62 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,62 @@
1+
#include "shared-bindings/board/__init__.h"
2+
3+
STATIC const mp_rom_map_elem_t board_module_globals_table[] = {
4+
CIRCUITPYTHON_BOARD_DICT_STANDARD_ITEMS
5+
6+
{ MP_ROM_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA13) },
7+
{ MP_ROM_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA12) },
8+
{ MP_ROM_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PA14) },
9+
{ MP_ROM_QSTR(MP_QSTR_SD_CS), MP_ROM_PTR(&pin_PA27) },
10+
11+
{ MP_ROM_QSTR(MP_QSTR_RELAY_A), MP_ROM_PTR(&pin_PB15) },
12+
{ MP_ROM_QSTR(MP_QSTR_BURN1), MP_ROM_PTR(&pin_PB31) },
13+
{ MP_ROM_QSTR(MP_QSTR_BURN2), MP_ROM_PTR(&pin_PA15) },
14+
15+
{ MP_ROM_QSTR(MP_QSTR_DAC0), MP_ROM_PTR(&pin_PA02) },
16+
{ MP_ROM_QSTR(MP_QSTR_EN_RF), MP_ROM_PTR(&pin_PA04) },
17+
{ MP_ROM_QSTR(MP_QSTR_AIN5), MP_ROM_PTR(&pin_PA05) },
18+
{ MP_ROM_QSTR(MP_QSTR_BATTERY), MP_ROM_PTR(&pin_PA06) },
19+
{ MP_ROM_QSTR(MP_QSTR_L1PROG), MP_ROM_PTR(&pin_PA07) },
20+
21+
{ MP_ROM_QSTR(MP_QSTR_CHRG), MP_ROM_PTR(&pin_PB08) },
22+
{ MP_ROM_QSTR(MP_QSTR_PA16), MP_ROM_PTR(&pin_PA16) },
23+
{ MP_ROM_QSTR(MP_QSTR_PA17), MP_ROM_PTR(&pin_PA17) },
24+
{ MP_ROM_QSTR(MP_QSTR_VBUS_RST), MP_ROM_PTR(&pin_PA18) },
25+
{ MP_ROM_QSTR(MP_QSTR_PA19), MP_ROM_PTR(&pin_PA19) },
26+
{ MP_ROM_QSTR(MP_QSTR_PA20), MP_ROM_PTR(&pin_PA20) },
27+
{ MP_ROM_QSTR(MP_QSTR_PA22), MP_ROM_PTR(&pin_PA22) },
28+
{ MP_ROM_QSTR(MP_QSTR_PB16), MP_ROM_PTR(&pin_PB16) },
29+
{ MP_ROM_QSTR(MP_QSTR_PB17), MP_ROM_PTR(&pin_PB17) },
30+
{ MP_ROM_QSTR(MP_QSTR_PB22), MP_ROM_PTR(&pin_PB22) },
31+
{ MP_ROM_QSTR(MP_QSTR_PB23), MP_ROM_PTR(&pin_PB23) },
32+
33+
{ MP_ROM_QSTR(MP_QSTR_RF1_RST), MP_ROM_PTR(&pin_PB00) },
34+
{ MP_ROM_QSTR(MP_QSTR_RF1_CS), MP_ROM_PTR(&pin_PB30) },
35+
{ MP_ROM_QSTR(MP_QSTR_RF1_IO4), MP_ROM_PTR(&pin_PB04) },
36+
{ MP_ROM_QSTR(MP_QSTR_RF1_IO0), MP_ROM_PTR(&pin_PB05) },
37+
38+
{ MP_ROM_QSTR(MP_QSTR_RF2_IO0), MP_ROM_PTR(&pin_PB06) },
39+
{ MP_ROM_QSTR(MP_QSTR_RF2_IO4), MP_ROM_PTR(&pin_PB07) },
40+
{ MP_ROM_QSTR(MP_QSTR_RF2_CS), MP_ROM_PTR(&pin_PB09) },
41+
{ MP_ROM_QSTR(MP_QSTR_RF2_RST), MP_ROM_PTR(&pin_PB14) },
42+
43+
{ MP_ROM_QSTR(MP_QSTR_EN_GPS), MP_ROM_PTR(&pin_PB01) },
44+
{ MP_ROM_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PB02) },
45+
{ MP_ROM_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PB03) },
46+
{ MP_ROM_QSTR(MP_QSTR_TX2), MP_ROM_PTR(&pin_PA17) },
47+
{ MP_ROM_QSTR(MP_QSTR_RX2), MP_ROM_PTR(&pin_PA16) },
48+
49+
{ MP_ROM_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PB12) },
50+
{ MP_ROM_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PB13) },
51+
{ MP_ROM_QSTR(MP_QSTR_SCL2), MP_ROM_PTR(&pin_PA16) },
52+
{ MP_ROM_QSTR(MP_QSTR_SDA2), MP_ROM_PTR(&pin_PA17) },
53+
54+
{ MP_ROM_QSTR(MP_QSTR_WDT_WDI), MP_ROM_PTR(&pin_PA23) },
55+
{ MP_ROM_QSTR(MP_QSTR_NEOPIXEL), MP_ROM_PTR(&pin_PA21) },
56+
57+
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
58+
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
59+
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
60+
61+
};
62+
MP_DEFINE_CONST_DICT(board_module_globals, board_module_globals_table);

‎py/circuitpy_mpconfig.h

Lines changed: 8 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -554,6 +554,14 @@ void supervisor_run_background_tasks_if_tick(void);
554554

555555
#define CIRCUITPY_BOOT_OUTPUT_FILE "/boot_out.txt"
556556

557+
#ifndef CIRCUITPY_BOOT_COUNTER
558+
#define CIRCUITPY_BOOT_COUNTER 0
559+
#endif
560+
561+
#if !defined(CIRCUITPY_INTERNAL_NVM_SIZE) && CIRCUITPY_BOOT_COUNTER != 0
562+
#error "boot counter requires CIRCUITPY_NVM enabled"
563+
#endif
564+
557565
#define CIRCUITPY_VERBOSE_BLE 0
558566

559567
// This trades ~1k flash space (1) for that much in RAM plus the cost to compute

0 commit comments

Comments
 (0)