Merge pull request #5482 from weblate/weblate-circuitpython-main

Translations update from Weblate

Author: tannewt

locale/ID.po

@@ -560,6 +560,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr "Kedalaman bit harus kelipatan 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr ""

locale/cs.po

@@ -554,6 +554,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr ""

locale/de_DE.po

@@ -562,6 +562,10 @@ msgstr "Bittiefe muss zwischen 1 und 6 liegen, nicht %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit depth muss ein Vielfaches von 8 sein."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "Sowohl RX als auch TX sind zu Flusssteuerung erforderlich"

locale/el.po

@@ -551,6 +551,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr ""

locale/en_GB.po

@@ -562,6 +562,10 @@ msgstr "Bit depth must be from 1 to 6 inclusive, not %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit depth must be multiple of 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "Both RX and TX required for flow control"

locale/es.po

@@ -566,6 +566,10 @@ msgstr "Bit depth tiene que ser de 1 a 6 inclusivo, no %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bits depth debe ser múltiplo de 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "Ambos RX y TX requeridos para control de flujo"

locale/fil.po

@@ -558,6 +558,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit depth ay dapat multiple ng 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr ""

locale/fr.po

@@ -568,6 +568,10 @@ msgstr "Bit depth doit être entre 1 et 6 inclusivement, et non %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "La profondeur de bit doit être un multiple de 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "RX et TX requis pour le contrôle de flux"

locale/hi.po

@@ -551,6 +551,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr ""

locale/it_IT.po

@@ -566,6 +566,10 @@ msgstr "La profondità dei bit deve essere inclusiva da 1 a 6, non %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "La profondità di bit deve essere un multiplo di 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "Sia RX che TX richiedono il controllo del flow"

locale/ja.po

@@ -558,6 +558,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr "ビット深度は8の倍数でなければなりません"
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "フロー制御のためRXとTXの両方が必要"

locale/ko.po

@@ -554,6 +554,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr ""
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr ""

locale/nl.po

@@ -556,6 +556,10 @@ msgstr "Bitdiepte moet tussen 1 en 6 liggen, niet %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bit diepte moet een meervoud van 8 zijn."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "RX en TX zijn beide vereist voor stroomregeling"

locale/pl.po

@@ -558,6 +558,10 @@ msgstr ""
 msgid "Bit depth must be multiple of 8."
 msgstr "Głębia musi być wielokrotnością 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "Do kontroli przepływu wymagane są zarówno RX, jak i TX"

locale/pt_BR.po

@@ -569,6 +569,10 @@ msgstr "A profundidade dos bits deve ser de 1 até 6 inclusive, porém não %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "A profundidade de bits deve ser o múltiplo de 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "Ambos os RX e TX são necessários para o controle do fluxo"

locale/sv.po

@@ -6,7 +6,7 @@ msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
 "POT-Creation-Date: 2021-01-04 12:55-0600\n"
-"PO-Revision-Date: 2021-10-17 14:36+0000\n"
+"PO-Revision-Date: 2021-10-18 22:56+0000\n"
 "Last-Translator: Jonny Bergdahl <[email protected]>\n"
 "Language-Team: LANGUAGE <[email protected]>\n"
 "Language: sv\n"
@@ -561,6 +561,10 @@ msgstr "Bitdjup måste vara inom 1 till 6, inte %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bitdjup måste vara multipel av 8."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "Både RX och TX krävs för handskakning"
@@ -3035,7 +3039,7 @@ msgstr "division med noll"
 
 #: ports/espressif/common-hal/rotaryio/IncrementalEncoder.c
 msgid "divisor must be 4"
-msgstr ""
+msgstr "divisor måste vara 4"
 
 #: py/objdeque.c
 msgid "empty"

locale/zh_Latn_pinyin.po

@@ -563,6 +563,10 @@ msgstr "wèi shēn dù bì xū bāo hán 1 dào 6, ér bù shì %d"
 msgid "Bit depth must be multiple of 8."
 msgstr "Bǐtè shēndù bìxū shì 8 bèi yǐshàng."
 
+#: supervisor/shared/safe_mode.c
+msgid "Boot device must be first device (interface #0)."
+msgstr ""
+
 #: ports/mimxrt10xx/common-hal/busio/UART.c
 msgid "Both RX and TX required for flow control"
 msgstr "liú liàng kòng zhì suǒ xū de RX hé TX"