Add board config files

Author: spe2

ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/board.c

@@ -0,0 +1,40 @@
+/*
+ * This file is part of the MicroPython project, http://micropython.org/
+ *
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2021 Scott Shawcroft for Adafruit Industries
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "supervisor/board.h"
+
+#include "shared-bindings/microcontroller/Pin.h"
+#include "src/rp2_common/hardware_gpio/include/hardware/gpio.h"
+
+void board_init(void) {
+}
+
+bool board_requests_safe_mode(void) {
+    return false;
+}
+
+void reset_board(void) {
+}

ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/mpconfigboard.h

@@ -0,0 +1,17 @@
+#define MICROPY_HW_BOARD_NAME "Sparkfun Pro Micro RP2040"
+#define MICROPY_HW_MCU_NAME "rp2040"
+
+#define MICROPY_HW_NEOPIXEL (&pin_GPIO25)
+
+#define DEFAULT_I2C_BUS_SCL (&pin_GPIO17)
+#define DEFAULT_I2C_BUS_SDA (&pin_GPIO16)
+
+#define DEFAULT_SPI_BUS_SCK (&pin_GPIO22)
+#define DEFAULT_SPI_BUS_MOSI (&pin_GPIO23)
+#define DEFAULT_SPI_BUS_MISO (&pin_GPIO20)
+
+#define DEFAULT_UART_BUS_RX (&pin_GPIO1)
+#define DEFAULT_UART_BUS_TX (&pin_GPIO0)
+
+// Flash chip is GD25Q128 connected over QSPI
+#define TOTAL_FLASH_SIZE (16 * 1024 * 1024)

ports/raspberrypi/boards/sparkfun_pro_micro_rp2040/mpconfigboard.mk

@@ -0,0 +1,9 @@
+USB_VID = 0x1B4F
+USB_PID = 0x0026
+USB_PRODUCT = "Pro Micro RP2040"
+USB_MANUFACTURER = "Sparkfun"
+
+CHIP_VARIANT = RP2040
+CHIP_FAMILY = rp2
+
+INTERNAL_FLASH_FILESYSTEM = 1