selftests: net: no_forwarding: fix VID for $swp2 in one_bridge_two_pvids() test

[ Upstream commit 9f49d14 ]

Currently, the second bridge command overwrites the first one.
Fix this by adding this VID to the interface behind $swp2.

The one_bridge_two_pvids() test intends to check that there is no
leakage of traffic between bridge ports which have a single VLAN - the
PVID VLAN.

Because of a typo, port $swp1 is configured with a PVID twice (second
command overwrites first), and $swp2 isn't configured at all (and since
the bridge vlan_default_pvid property is set to 0, this port will not
have a PVID at all, so it will drop all untagged and priority-tagged
traffic).

So, instead of testing the configuration that was intended, we are
testing a different one, where one port has PVID 2 and the other has
no PVID. This incorrect version of the test should also pass, but is
ineffective for its purpose, so fix the typo.

This typo has an impact on results of the test,
potentially leading to wrong conclusions regarding
the functionality of a network device.

The tests results:

TEST: Switch ports in VLAN-aware bridge with different PVIDs:
	Unicast non-IP untagged   [ OK ]
	Multicast non-IP untagged   [ OK ]
	Broadcast non-IP untagged   [ OK ]
	Unicast IPv4 untagged   [ OK ]
	Multicast IPv4 untagged   [ OK ]
	Unicast IPv6 untagged   [ OK ]
	Multicast IPv6 untagged   [ OK ]
	Unicast non-IP VID 1   [ OK ]
	Multicast non-IP VID 1   [ OK ]
	Broadcast non-IP VID 1   [ OK ]
	Unicast IPv4 VID 1   [ OK ]
	Multicast IPv4 VID 1   [ OK ]
	Unicast IPv6 VID 1   [ OK ]
	Multicast IPv6 VID 1   [ OK ]
	Unicast non-IP VID 4094   [ OK ]
	Multicast non-IP VID 4094   [ OK ]
	Broadcast non-IP VID 4094   [ OK ]
	Unicast IPv4 VID 4094   [ OK ]
	Multicast IPv4 VID 4094   [ OK ]
	Unicast IPv6 VID 4094   [ OK ]
	Multicast IPv6 VID 4094   [ OK ]

Fixes: 476a4f0 ("selftests: forwarding: add a no_forwarding.sh test")
Reviewed-by: Hangbin Liu <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Signed-off-by: Kacper Ludwinski <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

Author: kacperlud

tools/testing/selftests/net/forwarding/no_forwarding.sh

@@ -202,7 +202,7 @@ one_bridge_two_pvids()
 	ip link set $swp2 master br0
 
 	bridge vlan add dev $swp1 vid 1 pvid untagged
-	bridge vlan add dev $swp1 vid 2 pvid untagged
+	bridge vlan add dev $swp2 vid 2 pvid untagged
 
 	run_test "Switch ports in VLAN-aware bridge with different PVIDs"