Shield family USB-C® cable requirement update incl. SW requirement

Author: TaddyHC

content/hardware/04.pro/shields/portenta-cat-m1-nb-iot-gnss-shield/tutorials/getting-started/getting-started.md

@@ -35,10 +35,11 @@ The goals of this project are:
 
 ## Hardware & Software Needed
 
-- Arduino IDE ([online](https://create.arduino.cc/) or [offline](https://www.arduino.cc/en/main/software)).
 - [Portenta H7](https://store.arduino.cc/products/portenta-h7)
 - [Portenta Cat. M1/NB IoT GNSS Shield](https://store.arduino.cc/products/portenta-catm1)
-- [Dipole Antenna](https://store.arduino.cc/antenna) (or equivalent product with the same frequency range).
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c)
+- [Dipole Antenna](https://store.arduino.cc/antenna) (or equivalent product with the same frequency range)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software) or [Arduino IDE 2.0+](https://www.arduino.cc/en/software)
 
 ## Instructions
 

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/blob-detection/content.md

@@ -25,8 +25,8 @@ In this tutorial you will use the Portenta Vision Shield to detect the presence
 
 - [Portenta H7 board](https://store.arduino.cc/portenta-h7)
 - [Arduino Portenta Vision Shield - Ethernet](https://store.arduino.cc/products/arduino-portenta-vision-shield-ethernet)
-- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
-- Arduino IDE 1.8.10+  or Arduino Pro IDE 0.0.4+
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software) or [Arduino IDE 2.0+](https://www.arduino.cc/en/software)
 - Portenta Bootloader Version 20+
 - OpenMV IDE 2.6.4+
 

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/camera-to-bitmap-sd-card/content.md

@@ -31,9 +31,9 @@ This tutorial shows you how to capture a frame from the Portenta Vision Shield C
 
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
 - Portenta Vision Shield ([LoRa](https://store.arduino.cc/portenta-vision-shield-lora) or [Ethernet](https://store.arduino.cc/portenta-vision-shield))
-- 1x USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - Micro SD card
-- Arduino IDE or Arduino-cli
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2.0+](https://www.arduino.cc/en/software) or [Arduino-cli](https://arduino.github.io/arduino-cli)
 
 ## Instructions
 

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/connecting-to-ttn/content.md

@@ -26,9 +26,9 @@ This tutorial explains how to connect your Portenta H7 to The Things Network (TT
 
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
 - [Portenta Vision Shield - LoRa](https://store.arduino.cc/portenta-vision-shield-lora)
-- [1x Dipole Pentaband antenna](https://store.arduino.cc/antenna) or a UFL Antenna of the H7 
-- Arduino [offline](https://www.arduino.cc/en/main/software) IDE or Arduino [Cloud Editor](https://create.arduino.cc/)
-- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
+- [Dipole Pentaband antenna](https://store.arduino.cc/antenna) or a UFL Antenna of the H7 (x1)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2.0+](https://www.arduino.cc/en/software), or the [Arduino Cloud Editor](https://create.arduino.cc/editor)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - An [account](https://console.cloud.thethings.network/) with The Things Network
 
 ### Updating the LoRa® Module Firmware

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/creating-basic-face-filter/content.md

@@ -26,8 +26,8 @@ In this tutorial you will build a MicroPython application with OpenMV, to use th
 
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
 - [Portenta Vision Shield](https://store.arduino.cc/portenta-vision-shield)
-- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
-- Arduino IDE 1.8.10+  or Arduino Pro IDE 0.0.4+ 
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software) or [Arduino IDE 2.0+](https://www.arduino.cc/en/software)
 - Portenta Bootloader Version 20+
 - OpenMV IDE 2.6.4+
 

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/custom-machine-learning-model/content.md

@@ -26,7 +26,7 @@ This tutorial teaches you how to train a custom machine learning model with Edge
 
 - [Portenta H7 board](https://store.arduino.cc/portenta-h7)
 - [Portenta Vision Shield - LoRa](https://store.arduino.cc/portenta-vision-shield-lora) or [Portenta Vision Shield - Ethernet](https://store.arduino.cc/products/arduino-portenta-vision-shield-ethernet)
-- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - An [Edge Impulse®](https://studio.edgeimpulse.com/) account for training the ML model
 - Fruits (or other objects) to create the classification model 🍏🍌🍐
 

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/ethernet-with-ide/content.md

@@ -34,7 +34,8 @@ The goals of this project are:
 
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
 - [Portenta Vision Shield - Ethernet](https://store.arduino.cc/products/arduino-portenta-vision-shield-ethernet)
-- Arduino [offline IDE](https://www.arduino.cc/en/main/software) or Arduino [Cloud Editor](https://create.arduino.cc/)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2.0+](https://www.arduino.cc/en/software), or the [Arduino Cloud Editor](https://create.arduino.cc/editor)
 - Ethernet cable
 - USB-C® cable
 

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/ethernet-with-openmv/content.md

@@ -30,9 +30,9 @@ With the Ethernet version of the Arduino Portenta Vision Shield it is possible t
 
 - [Portenta H7 board](https://store.arduino.cc/portenta-h7)
 - [Portenta Vision Shield - Ethernet](https://store.arduino.cc/products/arduino-portenta-vision-shield-lora®)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c)
 - [OpenMV](https://openmv.io/pages/download)
 - Ethernet cable
-- USB-C® cable
 
 ***If you want to know more about the ethernet connection please go to the [Arduino IDE ethernet tutorial](https://docs.arduino.cc/tutorials/portenta-vision-shield/ethernet-with-ide#ethernet-connection)***
 

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/getting-started-camera/content.md

@@ -23,8 +23,8 @@ This tutorial shows you how to capture frames from the Arduino Portenta Vision S
 
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
 - Portenta Vision Shield ([LoRa](https://store.arduino.cc/portenta-vision-shield-lora) or [Ethernet](https://store.arduino.cc/portenta-vision-shield))
-- 1x USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
-- Arduino IDE 1.8.10+
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c) (X1)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software) or [Arduino IDE 2.0+](https://www.arduino.cc/en/software)
 - Processing 3.5.4+
 
 ## Instructions

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/speech-recognition-engine/content.md

@@ -65,8 +65,8 @@ To use the Arduino Speech Recognition Engine, you will need one of the following
 In the case of the Portenta H7, remember that is always possible to add an external microphone as additional hardware, instead of using the Portenta Vision Shield.
 
 Additionally, you will need the following hardware and software:
-- 1x USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
-- [Arduino IDE 2](https://www.arduino.cc/en/software), [Arduino Cloud](https://cloud.arduino.cc), or [Arduino-cli](https://arduino.github.io/arduino-cli)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2.0+](https://www.arduino.cc/en/software), [Arduino Cloud Editor](https://create.arduino.cc/editor), or [Arduino-cli](https://arduino.github.io/arduino-cli)
 
 ## Instructions
 

content/hardware/04.pro/shields/portenta-vision-shield/tutorials/things-network-openmv/content.md

@@ -28,10 +28,10 @@ This tutorial explains how to connect your Portenta H7 to The Things Network (TT
 
 - [Portenta H7](https://store.arduino.cc/portenta-h7)
 - [Portenta Vision Shield - LoRa](https://store.arduino.cc/portenta-vision-shield-lora)
-- 1x [Dipole Pentaband antenna](https://store.arduino.cc/antenna) or a UFL Antenna of the H7 
+- [Dipole Pentaband antenna](https://store.arduino.cc/antenna) or a UFL Antenna of the H7 (x1)
 - [OpenMV IDE](https://openmv.io/pages/download)
-- Arduino IDE 1.8.10+ or Arduino Pro IDE 0.0.4+ or Arduino CLI 0.13.0+
-- 1x USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
+- [Arduino IDE 1.8.10+](https://www.arduino.cc/en/software), [Arduino IDE 2.0+](https://www.arduino.cc/en/software) or [Arduino CLI 0.13.0+](https://arduino.github.io/arduino-cli)
+- [USB-C® cable](https://store.arduino.cc/products/usb-cable2in1-type-c) (x1)
 - An account on [The Things Network](https://console.cloud.thethings.network/)
 
 ## Instructions