feat(docs): update README and fix broken links

Lzw655 · Lzw655 · commit 8e61c054aec5 · 2024-11-08T19:31:46.000+08:00
diff --git a/docs/Board_Contribution_Guide.md b/docs/Board_Contribution_Guide.md
@@ -1,5 +1,15 @@
 # Board Contribution Guide
 
+* [中文版本](./Board_Contribution_Guide_CN.md)
+
+## Table of Contents
+
+- [Board Contribution Guide](#board-contribution-guide)
+  - [Table of Contents](#table-of-contents)
+  - [Contribution Guidelines](#contribution-guidelines)
+  - [File Modifications](#file-modifications)
+  - [Adaptation Process](#adaptation-process)
+
 ## Contribution Guidelines
 
 1. The development board must at least ensure its hardware schematic is open-source, providing a link or file for reference.
diff --git a/docs/Board_Contribution_Guide_CN.md b/docs/Board_Contribution_Guide_CN.md
@@ -1,5 +1,15 @@
 # 开发板贡献指南
 
+* [English Version](./Board_Contribution_Guide.md)
+
+## 目录
+
+- [开发板贡献指南](#开发板贡献指南)
+  - [目录](#目录)
+  - [贡献说明](#贡献说明)
+  - [文件修改](#文件修改)
+  - [适配流程](#适配流程)
+
 ## 贡献说明
 
 1. 开发板至少需要确保其硬件原理图开源，并提供链接或文件。
diff --git a/docs/FAQ.md b/docs/FAQ.md
@@ -1,5 +1,17 @@
 # FAQ
 
+* [中文版本](./FAQ_CN.md)
+
+## Table of Contents
+
+- [FAQ](#faq)
+  - [Table of Contents](#table-of-contents)
+  - [Where is the directory for Arduino libraries?](#where-is-the-directory-for-arduino-libraries)
+  - [How to Install ESP32\_Display\_Panel in Arduino IDE?](#how-to-install-esp32_display_panel-in-arduino-ide)
+  - [Where are the installation directory for arduino-esp32 and the SDK located?](#where-are-the-installation-directory-for-arduino-esp32-and-the-sdk-located)
+  - [How to fix screen drift issue when driving RGB LCD with ESP32-S3?](#how-to-fix-screen-drift-issue-when-driving-rgb-lcd-with-esp32-s3)
+  - [How to Use ESP32\_Display\_Panel on PlatformIO?](#how-to-use-esp32_display_panel-on-platformio)
+
 ## Where is the directory for Arduino libraries?
 
 You can find and modify the directory path for Arduino libraries by selecting `File` > `Preferences` > `Settings` > `Sketchbook location` from the menu bar in the Arduino IDE.
diff --git a/docs/FAQ_CN.md b/docs/FAQ_CN.md
@@ -1,5 +1,17 @@
 # 常见问题解答
 
+* [English Version](./FAQ.md)
+
+## 目录
+
+- [常见问题解答](#常见问题解答)
+  - [目录](#目录)
+  - [Arduino 库的目录在哪儿？](#arduino-库的目录在哪儿)
+  - [如何在 Arduino IDE 中安装 ESP32\_Display\_Panel？](#如何在-arduino-ide-中安装-esp32_display_panel)
+  - [arduino-eps32 的安装目录以及 SDK 的目录在哪儿？](#arduino-eps32-的安装目录以及-sdk-的目录在哪儿)
+  - [使用 ESP32-S3 驱动 RGB LCD 时出现画面漂移问题的解决方案](#使用-esp32-s3-驱动-rgb-lcd-时出现画面漂移问题的解决方案)
+  - [如何在 PlatformIO 上使用 ESP32\_Display\_Panel？](#如何在-platformio-上使用-esp32_display_panel)
+
 ## Arduino 库的目录在哪儿？
 
 您可以在 Arduino IDE 的菜单栏中选择 `File` > `Preferences` > `Settings` > `Sketchbook location` 来查找和修改 Arduino 库的目录路径。
diff --git a/docs/_static/block_diagram.drawio b/docs/_static/block_diagram.drawio
diff --git a/docs/_static/block_diagram.png b/docs/_static/block_diagram.png
diff --git a/examples/LCD/3wireSPI_RGB/3wireSPI_RGB.ino b/examples/LCD/3wireSPI_RGB/3wireSPI_RGB.ino
@@ -11,9 +11,9 @@
  *
  * ## How to use
  *
- * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) if needed.
+ * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) if needed.
  * 2. Modify the macros in the example to match the parameters according to your hardware.
- * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)
+ * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
  * 4. Verify and upload the example to your ESP board.
  *
  * ## Serial Output
@@ -36,7 +36,7 @@
  *
  * ## Troubleshooting
  *
- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
  *
  */
 
diff --git a/examples/LCD/MIPI_DSI/MIPI_DSI.ino b/examples/LCD/MIPI_DSI/MIPI_DSI.ino
@@ -11,9 +11,9 @@
  *
  * ## How to use
  *
- * 1. [Configure drivers](../../../docs/How_To_Use.md#configuring-drivers) if needed.
+ * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) if needed.
  * 2. Modify the macros in the example to match the parameters according to your hardware.
- * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](../../../docs/How_To_Use.md#configuring-supported-development-boards)
+ * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
  * 4. Verify and upload the example to your ESP board.
  *
  * ## Serial Output
@@ -60,7 +60,7 @@
  *
  * ## Troubleshooting
  *
- * Please check the [FAQ](../../../docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
  *
  */
 
diff --git a/examples/LCD/QSPI/QSPI.ino b/examples/LCD/QSPI/QSPI.ino
@@ -11,9 +11,9 @@
  *
  * ## How to use
  *
- * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) if needed.
+ * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) if needed.
  * 2. Modify the macros in the example to match the parameters according to your hardware.
- * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)
+ * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
  * 4. Verify and upload the example to your ESP board.
  *
  * ## Serial Output
@@ -49,7 +49,7 @@
  *
  * ## Troubleshooting
  *
- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
  *
  */
 
diff --git a/examples/LCD/RGB/RGB.ino b/examples/LCD/RGB/RGB.ino
@@ -11,9 +11,9 @@
  *
  * ## How to use
  *
- * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) if needed.
+ * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) if needed.
  * 2. Modify the macros in the example to match the parameters according to your hardware.
- * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)
+ * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
  * 4. Verify and upload the example to your ESP board.
  *
  * ## Serial Output
@@ -34,7 +34,7 @@
  *
  * ## Troubleshooting
  *
- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
  *
  */
 
diff --git a/examples/LCD/SPI/SPI.ino b/examples/LCD/SPI/SPI.ino
@@ -11,9 +11,9 @@
  *
  * ## How to use
  *
- * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) if needed.
+ * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) if needed.
  * 2. Modify the macros in the example to match the parameters according to your hardware.
- * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)
+ * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
  * 4. Verify and upload the example to your ESP board.
  *
  * ## Serial Output
@@ -49,7 +49,7 @@
  *
  * ## Troubleshooting
  *
- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
  *
  */
 
diff --git a/examples/LVGL/v8/Porting/Porting.ino b/examples/LVGL/v8/Porting/Porting.ino
@@ -15,17 +15,17 @@
  *
  * 1. For **ESP32_Display_Panel**:
  *
- *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.
- *     - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-supported-development-boards) to configure it.
- *     - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-custom-development-boards) to configure it.
+ *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.
+ *     - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-supported-development-boards) to configure it.
+ *     - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-custom-development-boards) to configure it.
  *
  * 2. For **lvgl**:
  *
- *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-lvgl) to add *lv_conf.h* file and change the configurations.
+ *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-lvgl) to add *lv_conf.h* file and change the configurations.
  *     - Modify the macros in the [lvgl_port_v8.h](./lvgl_port_v8.h) file to configure the LVGL porting parameters.
  *
  * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters. For supported
- *    boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)
+ *    boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
  * 4. Verify and upload the example to your ESP board.
  *
  * ## Serial Output
@@ -44,7 +44,7 @@
  *
  * ## Troubleshooting
  *
- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
  *
  */
 
diff --git a/examples/LVGL/v8/Rotation/Rotation.ino b/examples/LVGL/v8/Rotation/Rotation.ino
@@ -13,17 +13,17 @@
  *
  * 1. For **ESP32_Display_Panel**:
  *
- *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.
- *     - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-supported-development-boards) to configure it.
- *     - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-custom-development-boards) to configure it.
+ *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.
+ *     - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-supported-development-boards) to configure it.
+ *     - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-custom-development-boards) to configure it.
  *
  * 2. For **lvgl**:
  *
- *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-lvgl) to add *lv_conf.h* file and change the configurations.
+ *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-lvgl) to add *lv_conf.h* file and change the configurations.
  *     - Modify the macros in the [lvgl_port_v8.h](./lvgl_port_v8.h) file to configure the LVGL porting parameters.
  *
  * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters. For supported
- *    boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)
+ *    boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
  * 4. Verify and upload the example to your ESP board.
  *
  * ## Serial Output
@@ -42,7 +42,7 @@
  *
  * ## Troubleshooting
  *
- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
  *
  */
 
diff --git a/examples/Panel/PanelTest/PanelTest.ino b/examples/Panel/PanelTest/PanelTest.ino
@@ -9,12 +9,12 @@
  *
  * 1. For **ESP32_Display_Panel**:
  *
- *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.
- *     - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-supported-development-boards) to configure it.
- *     - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-custom-development-boards) to configure it.
+ *     - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.
+ *     - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-supported-development-boards) to configure it.
+ *     - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-custom-development-boards) to configure it.
  *
  * 2. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters. For supported
- *    boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)
+ *    boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
  * 3. Verify and upload the example to your ESP board.
  *
  * ## Serial Output
@@ -36,7 +36,7 @@
  *
  * ## Troubleshooting
  *
- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.
  *
  */
 
diff --git a/examples/SquareLine/v8/Porting/Porting.ino b/examples/SquareLine/v8/Porting/Porting.ino
diff --git a/examples/SquareLine/v8/WiFiClock/WiFiClock.ino b/examples/SquareLine/v8/WiFiClock/WiFiClock.ino
diff --git a/examples/Touch/I2C/I2C.ino b/examples/Touch/I2C/I2C.ino
diff --git a/examples/Touch/SPI/SPI.ino b/examples/Touch/SPI/SPI.ino

Original file line number	Diff line number	Diff line change
`@@ -11,9 +11,9 @@`
`11`	`11`	`*`
`12`	`12`	`* ## How to use`
`13`	`13`	`*`
`14`		`- * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) if needed.`
	`14`	`+ * 1. [Configure drivers](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) if needed.`
`15`	`15`	`* 2. Modify the macros in the example to match the parameters according to your hardware.`
`16`		- * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)
	`16`	+ * 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)
`17`	`17`	`* 4. Verify and upload the example to your ESP board.`
`18`	`18`	`*`
`19`	`19`	`* ## Serial Output`
`@@ -36,7 +36,7 @@`
`36`	`36`	`*`
`37`	`37`	`* ## Troubleshooting`
`38`	`38`	`*`
`39`		`- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.`
	`39`	`+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.`
`40`	`40`	`*`
`41`	`41`	`*/`
`42`	`42`
Original file line number	Diff line number	Diff line change
`@@ -15,17 +15,17 @@`
`15`	`15`	`*`
`16`	`16`	`* 1. For ESP32_Display_Panel:`
`17`	`17`	`*`
`18`		`- * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.`
`19`		`- * - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-supported-development-boards) to configure it.`
`20`		`- * - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-custom-development-boards) to configure it.`
	`18`	`+ * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.`
	`19`	`+ * - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-supported-development-boards) to configure it.`
	`20`	`+ * - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-custom-development-boards) to configure it.`
`21`	`21`	`*`
`22`	`22`	`* 2. For lvgl:`
`23`	`23`	`*`
`24`		`- * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-lvgl) to add lv_conf.h file and change the configurations.`
	`24`	`+ * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-lvgl) to add lv_conf.h file and change the configurations.`
`25`	`25`	`* - Modify the macros in the [lvgl_port_v8.h](./lvgl_port_v8.h) file to configure the LVGL porting parameters.`
`26`	`26`	`*`
`27`	`27`	* 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters. For supported
`28`		`- * boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)`
	`28`	`+ * boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)`
`29`	`29`	`* 4. Verify and upload the example to your ESP board.`
`30`	`30`	`*`
`31`	`31`	`* ## Serial Output`
`@@ -44,7 +44,7 @@`
`44`	`44`	`*`
`45`	`45`	`* ## Troubleshooting`
`46`	`46`	`*`
`47`		`- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.`
	`47`	`+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.`
`48`	`48`	`*`
`49`	`49`	`*/`
`50`	`50`
Original file line number	Diff line number	Diff line change
`@@ -13,17 +13,17 @@`
`13`	`13`	`*`
`14`	`14`	`* 1. For ESP32_Display_Panel:`
`15`	`15`	`*`
`16`		`- * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.`
`17`		`- * - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-supported-development-boards) to configure it.`
`18`		`- * - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-custom-development-boards) to configure it.`
	`16`	`+ * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.`
	`17`	`+ * - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-supported-development-boards) to configure it.`
	`18`	`+ * - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-custom-development-boards) to configure it.`
`19`	`19`	`*`
`20`	`20`	`* 2. For lvgl:`
`21`	`21`	`*`
`22`		`- * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-lvgl) to add lv_conf.h file and change the configurations.`
	`22`	`+ * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-lvgl) to add lv_conf.h file and change the configurations.`
`23`	`23`	`* - Modify the macros in the [lvgl_port_v8.h](./lvgl_port_v8.h) file to configure the LVGL porting parameters.`
`24`	`24`	`*`
`25`	`25`	* 3. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters. For supported
`26`		`- * boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)`
	`26`	`+ * boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)`
`27`	`27`	`* 4. Verify and upload the example to your ESP board.`
`28`	`28`	`*`
`29`	`29`	`* ## Serial Output`
`@@ -42,7 +42,7 @@`
`42`	`42`	`*`
`43`	`43`	`* ## Troubleshooting`
`44`	`44`	`*`
`45`		`- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.`
	`45`	`+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.`
`46`	`46`	`*`
`47`	`47`	`*/`
`48`	`48`
Original file line number	Diff line number	Diff line change
`@@ -9,12 +9,12 @@`
`9`	`9`	`*`
`10`	`10`	`* 1. For ESP32_Display_Panel:`
`11`	`11`	`*`
`12`		`- * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.`
`13`		`- * - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-supported-development-boards) to configure it.`
`14`		`- * - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#using-custom-development-boards) to configure it.`
	`12`	`+ * - Follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-drivers) to configure drivers if needed.`
	`13`	`+ * - If using a supported development board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-supported-development-boards) to configure it.`
	`14`	`+ * - If using a custom board, follow the [steps](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#using-custom-development-boards) to configure it.`
`15`	`15`	`*`
`16`	`16`	* 2. Navigate to the `Tools` menu in the Arduino IDE to choose a ESP board and configure its parameters. For supported
`17`		`- * boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/How_To_Use.md#configuring-supported-development-boards)`
	`17`	`+ * boards, please refter to [Configuring Supported Development Boards](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/How_To_Use.md#configuring-supported-development-boards)`
`18`	`18`	`* 3. Verify and upload the example to your ESP board.`
`19`	`19`	`*`
`20`	`20`	`* ## Serial Output`
`@@ -36,7 +36,7 @@`
`36`	`36`	`*`
`37`	`37`	`* ## Troubleshooting`
`38`	`38`	`*`
`39`		`- * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/docs/faq.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.`
	`39`	`+ * Please check the [FAQ](https://github.com/esp-arduino-libs/ESP32_Display_Panel/blob/master/docs/FAQ.md) first to see if the same question exists. If not, please create a [Github issue](https://github.com/esp-arduino-libs/ESP32_Display_Panel/issues). We will get back to you as soon as possible.`
`40`	`40`	`*`
`41`	`41`	`*/`
`42`	`42`