rsi: Add RS9113 wireless driver

This patch adds the Redpine Signals' 91x wireless driver.

Signed-off-by: Fariya Fatima <[email protected]>
Signed-off-by: John W. Linville <[email protected]>

Author: fariyaf

drivers/net/wireless/Kconfig

@@ -281,5 +281,6 @@ source "drivers/net/wireless/ti/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"
 source "drivers/net/wireless/mwifiex/Kconfig"
 source "drivers/net/wireless/cw1200/Kconfig"
+source "drivers/net/wireless/rsi/Kconfig"
 
 endif # WLAN

drivers/net/wireless/Makefile

@@ -59,3 +59,4 @@ obj-$(CONFIG_BRCMFMAC)	+= brcm80211/
 obj-$(CONFIG_BRCMSMAC)	+= brcm80211/
 
 obj-$(CONFIG_CW1200)	+= cw1200/
+obj-$(CONFIG_RSI_91X)	+= rsi/

drivers/net/wireless/rsi/Kconfig

@@ -0,0 +1,30 @@
+config RSI_91X
+	tristate "Redpine Signals Inc 91x WLAN driver support"
+	depends on MAC80211
+	---help---
+	  This option enabes support for RSI 1x1 devices.
+	  Select M (recommended), if you have a RSI 1x1 wireless module.
+
+config RSI_DEBUGFS
+	bool "Redpine Signals Inc debug support"
+	depends on RSI_91X
+	default y
+	---help---
+	 Say Y, if you would like to enable debug support. This option
+	 creates debugfs entries
+
+config RSI_SDIO
+	tristate "Redpine Signals SDIO bus support"
+	depends on MMC && RSI_91X
+	default m
+	---help---
+	  This option enables the SDIO bus support in rsi drivers.
+	  Select M (recommended), if you have a RSI 1x1 wireless module.
+
+config RSI_USB
+	tristate "Redpine Signals USB bus support"
+	depends on USB && RSI_91X
+	default m
+	---help---
+	  This option enables the USB bus support in rsi drivers.
+	  Select M (recommended), if you have a RSI 1x1 wireless module.

drivers/net/wireless/rsi/Makefile

@@ -0,0 +1,12 @@
+rsi_91x-y			+= rsi_91x_main.o
+rsi_91x-y			+= rsi_91x_core.o
+rsi_91x-y			+= rsi_91x_mac80211.o
+rsi_91x-y			+= rsi_91x_mgmt.o
+rsi_91x-y			+= rsi_91x_pkt.o
+rsi_91x-$(CONFIG_RSI_DEBUGFS)	+= rsi_91x_debugfs.o
+
+rsi_usb-y			+= rsi_91x_usb.o rsi_91x_usb_ops.o
+rsi_sdio-y			+= rsi_91x_sdio.o rsi_91x_sdio_ops.o
+obj-$(CONFIG_RSI_91X) 		+= rsi_91x.o
+obj-$(CONFIG_RSI_SDIO)		+= rsi_sdio.o
+obj-$(CONFIG_RSI_USB)		+= rsi_usb.o

drivers/net/wireless/rsi/rsi_91x_core.c

@@ -0,0 +1,342 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_mgmt.h"
+#include "rsi_common.h"
+
+/**
+ * rsi_determine_min_weight_queue() - This function determines the queue with
+ *				      the min weight.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: q_num: Corresponding queue number.
+ */
+static u8 rsi_determine_min_weight_queue(struct rsi_common *common)
+{
+	struct wmm_qinfo *tx_qinfo = common->tx_qinfo;
+	u32 q_len = 0;
+	u8 ii = 0;
+
+	for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
+		q_len = skb_queue_len(&common->tx_queue[ii]);
+		if ((tx_qinfo[ii].pkt_contended) && q_len) {
+			common->min_weight = tx_qinfo[ii].weight;
+			break;
+		}
+	}
+	return ii;
+}
+
+/**
+ * rsi_recalculate_weights() - This function recalculates the weights
+ *			       corresponding to each queue.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: recontend_queue bool variable
+ */
+static bool rsi_recalculate_weights(struct rsi_common *common)
+{
+	struct wmm_qinfo *tx_qinfo = common->tx_qinfo;
+	bool recontend_queue = false;
+	u8 ii = 0;
+	u32 q_len = 0;
+
+	for (ii = 0; ii < NUM_EDCA_QUEUES; ii++) {
+		q_len = skb_queue_len(&common->tx_queue[ii]);
+		/* Check for the need of contention */
+		if (q_len) {
+			if (tx_qinfo[ii].pkt_contended) {
+				tx_qinfo[ii].weight =
+				((tx_qinfo[ii].weight > common->min_weight) ?
+				 tx_qinfo[ii].weight - common->min_weight : 0);
+			} else {
+				tx_qinfo[ii].pkt_contended = 1;
+				tx_qinfo[ii].weight = tx_qinfo[ii].wme_params;
+				recontend_queue = true;
+			}
+		} else { /* No packets so no contention */
+			tx_qinfo[ii].weight = 0;
+			tx_qinfo[ii].pkt_contended = 0;
+		}
+	}
+
+	return recontend_queue;
+}
+
+/**
+ * rsi_core_determine_hal_queue() - This function determines the queue from
+ *				    which packet has to be dequeued.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: q_num: Corresponding queue number on success.
+ */
+static u8 rsi_core_determine_hal_queue(struct rsi_common *common)
+{
+	bool recontend_queue = false;
+	u32 q_len = 0;
+	u8 q_num = INVALID_QUEUE;
+	u8 ii, min = 0;
+
+	if (skb_queue_len(&common->tx_queue[MGMT_SOFT_Q])) {
+		if (!common->mgmt_q_block)
+			q_num = MGMT_SOFT_Q;
+		return q_num;
+	}
+
+	if (common->pkt_cnt != 0) {
+		--common->pkt_cnt;
+		return common->selected_qnum;
+	}
+
+get_queue_num:
+	q_num = 0;
+	recontend_queue = false;
+
+	q_num = rsi_determine_min_weight_queue(common);
+	q_len = skb_queue_len(&common->tx_queue[ii]);
+	ii = q_num;
+
+	/* Selecting the queue with least back off */
+	for (; ii < NUM_EDCA_QUEUES; ii++) {
+		if (((common->tx_qinfo[ii].pkt_contended) &&
+		     (common->tx_qinfo[ii].weight < min)) && q_len) {
+			min = common->tx_qinfo[ii].weight;
+			q_num = ii;
+		}
+	}
+
+	common->tx_qinfo[q_num].pkt_contended = 0;
+	/* Adjust the back off values for all queues again */
+	recontend_queue = rsi_recalculate_weights(common);
+
+	q_len = skb_queue_len(&common->tx_queue[q_num]);
+	if (!q_len) {
+		/* If any queues are freshly contended and the selected queue
+		 * doesn't have any packets
+		 * then get the queue number again with fresh values
+		 */
+		if (recontend_queue)
+			goto get_queue_num;
+
+		q_num = INVALID_QUEUE;
+		return q_num;
+	}
+
+	common->selected_qnum = q_num;
+	q_len = skb_queue_len(&common->tx_queue[q_num]);
+
+	switch (common->selected_qnum) {
+	case VO_Q:
+		if (q_len > MAX_CONTINUOUS_VO_PKTS)
+			common->pkt_cnt = (MAX_CONTINUOUS_VO_PKTS - 1);
+		else
+			common->pkt_cnt = --q_len;
+		break;
+
+	case VI_Q:
+		if (q_len > MAX_CONTINUOUS_VI_PKTS)
+			common->pkt_cnt = (MAX_CONTINUOUS_VI_PKTS - 1);
+		else
+			common->pkt_cnt = --q_len;
+
+		break;
+
+	default:
+		common->pkt_cnt = 0;
+		break;
+	}
+
+	return q_num;
+}
+
+/**
+ * rsi_core_queue_pkt() - This functions enqueues the packet to the queue
+ *			  specified by the queue number.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None.
+ */
+static void rsi_core_queue_pkt(struct rsi_common *common,
+			       struct sk_buff *skb)
+{
+	u8 q_num = skb->priority;
+	if (q_num >= NUM_SOFT_QUEUES) {
+		rsi_dbg(ERR_ZONE, "%s: Invalid Queue Number: q_num = %d\n",
+			__func__, q_num);
+		dev_kfree_skb(skb);
+		return;
+	}
+
+	skb_queue_tail(&common->tx_queue[q_num], skb);
+}
+
+/**
+ * rsi_core_dequeue_pkt() - This functions dequeues the packet from the queue
+ *			    specified by the queue number.
+ * @common: Pointer to the driver private structure.
+ * @q_num: Queue number.
+ *
+ * Return: Pointer to sk_buff structure.
+ */
+static struct sk_buff *rsi_core_dequeue_pkt(struct rsi_common *common,
+					    u8 q_num)
+{
+	if (q_num >= NUM_SOFT_QUEUES) {
+		rsi_dbg(ERR_ZONE, "%s: Invalid Queue Number: q_num = %d\n",
+			__func__, q_num);
+		return NULL;
+	}
+
+	return skb_dequeue(&common->tx_queue[q_num]);
+}
+
+/**
+ * rsi_core_qos_processor() - This function is used to determine the wmm queue
+ *			      based on the backoff procedure. Data packets are
+ *			      dequeued from the selected hal queue and sent to
+ *			      the below layers.
+ * @common: Pointer to the driver private structure.
+ *
+ * Return: None.
+ */
+void rsi_core_qos_processor(struct rsi_common *common)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct sk_buff *skb;
+	unsigned long tstamp_1, tstamp_2;
+	u8 q_num;
+	int status;
+
+	tstamp_1 = jiffies;
+	while (1) {
+		q_num = rsi_core_determine_hal_queue(common);
+		rsi_dbg(DATA_TX_ZONE,
+			"%s: Queue number = %d\n", __func__, q_num);
+
+		if (q_num == INVALID_QUEUE) {
+			rsi_dbg(DATA_TX_ZONE, "%s: No More Pkt\n", __func__);
+			break;
+		}
+
+		mutex_lock(&common->tx_rxlock);
+
+		status = adapter->check_hw_queue_status(adapter, q_num);
+		if ((status <= 0)) {
+			mutex_unlock(&common->tx_rxlock);
+			break;
+		}
+
+		if ((q_num < MGMT_SOFT_Q) &&
+		    ((skb_queue_len(&common->tx_queue[q_num])) <=
+		      MIN_DATA_QUEUE_WATER_MARK)) {
+			if (ieee80211_queue_stopped(adapter->hw, WME_AC(q_num)))
+				ieee80211_wake_queue(adapter->hw,
+						     WME_AC(q_num));
+		}
+
+		skb = rsi_core_dequeue_pkt(common, q_num);
+		if (skb == NULL) {
+			mutex_unlock(&common->tx_rxlock);
+			break;
+		}
+
+		if (q_num == MGMT_SOFT_Q)
+			status = rsi_send_mgmt_pkt(common, skb);
+		else
+			status = rsi_send_data_pkt(common, skb);
+
+		if (status) {
+			mutex_unlock(&common->tx_rxlock);
+			break;
+		}
+
+		common->tx_stats.total_tx_pkt_send[q_num]++;
+
+		tstamp_2 = jiffies;
+		mutex_unlock(&common->tx_rxlock);
+
+		if (tstamp_2 > tstamp_1 + (300 * HZ / 1000))
+			schedule();
+	}
+}
+
+/**
+ * rsi_core_xmit() - This function transmits the packets received from mac80211
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: None.
+ */
+void rsi_core_xmit(struct rsi_common *common, struct sk_buff *skb)
+{
+	struct rsi_hw *adapter = common->priv;
+	struct ieee80211_tx_info *info;
+	struct skb_info *tx_params;
+	struct ieee80211_hdr *tmp_hdr = NULL;
+	u8 q_num, tid = 0;
+
+	if ((!skb) || (!skb->len)) {
+		rsi_dbg(ERR_ZONE, "%s: Null skb/zero Length packet\n",
+			__func__);
+		goto xmit_fail;
+	}
+	info = IEEE80211_SKB_CB(skb);
+	tx_params = (struct skb_info *)info->driver_data;
+	tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
+
+	if (common->fsm_state != FSM_MAC_INIT_DONE) {
+		rsi_dbg(ERR_ZONE, "%s: FSM state not open\n", __func__);
+		goto xmit_fail;
+	}
+
+	if ((ieee80211_is_mgmt(tmp_hdr->frame_control)) ||
+	    (ieee80211_is_ctl(tmp_hdr->frame_control))) {
+		q_num = MGMT_SOFT_Q;
+		skb->priority = q_num;
+	} else {
+		if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
+			tid = (skb->data[24] & IEEE80211_QOS_TID);
+			skb->priority = TID_TO_WME_AC(tid);
+		} else {
+			tid = IEEE80211_NONQOS_TID;
+			skb->priority = BE_Q;
+		}
+		q_num = skb->priority;
+		tx_params->tid = tid;
+		tx_params->sta_id = 0;
+	}
+
+	if ((q_num != MGMT_SOFT_Q) &&
+	    ((skb_queue_len(&common->tx_queue[q_num]) + 1) >=
+	     DATA_QUEUE_WATER_MARK)) {
+		if (!ieee80211_queue_stopped(adapter->hw, WME_AC(q_num)))
+			ieee80211_stop_queue(adapter->hw, WME_AC(q_num));
+		rsi_set_event(&common->tx_thread.event);
+		goto xmit_fail;
+	}
+
+	rsi_core_queue_pkt(common, skb);
+	rsi_dbg(DATA_TX_ZONE, "%s: ===> Scheduling TX thead <===\n", __func__);
+	rsi_set_event(&common->tx_thread.event);
+
+	return;
+
+xmit_fail:
+	rsi_dbg(ERR_ZONE, "%s: Failed to queue packet\n", __func__);
+	/* Dropping pkt here */
+	ieee80211_free_txskb(common->priv->hw, skb);
+}