Merge tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix randconfig to generate a sane .config

 - rename hostprogs-y / always to hostprogs / always-y, which are more
   natual syntax.

 - optimize scripts/kallsyms

 - fix yes2modconfig and mod2yesconfig

 - make multiple directory targets ('make foo/ bar/') work

* tag 'kbuild-v5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: make multiple directory targets work
  kconfig: Invalidate all symbols after changing to y or m.
  kallsyms: fix type of kallsyms_token_table[]
  scripts/kallsyms: change table to store (strcut sym_entry *)
  scripts/kallsyms: rename local variables in read_symbol()
  kbuild: rename hostprogs-y/always to hostprogs/always-y
  kbuild: fix the document to use extra-y for vmlinux.lds
  kconfig: fix broken dependency in randconfig-generated .config

Author: torvalds

Documentation/kbuild/makefiles.rst

@@ -28,7 +28,6 @@ This document describes the Linux kernel Makefiles.
 	   --- 4.3 Using C++ for host programs
 	   --- 4.4 Controlling compiler options for host programs
 	   --- 4.5 When host programs are actually built
-	   --- 4.6 Using hostprogs-$(CONFIG_FOO)
 
 	=== 5 Kbuild clean infrastructure
 
@@ -595,11 +594,11 @@ compilation stage.
 Two steps are required in order to use a host executable.
 
 The first step is to tell kbuild that a host program exists. This is
-done utilising the variable hostprogs-y.
+done utilising the variable "hostprogs".
 
 The second step is to add an explicit dependency to the executable.
 This can be done in two ways. Either add the dependency in a rule,
-or utilise the variable $(always).
+or utilise the variable "always-y".
 Both possibilities are described in the following.
 
 4.1 Simple Host Program
@@ -612,7 +611,7 @@ Both possibilities are described in the following.
 
 	Example::
 
-		hostprogs-y := bin2hex
+		hostprogs := bin2hex
 
 	Kbuild assumes in the above example that bin2hex is made from a single
 	c-source file named bin2hex.c located in the same directory as
@@ -630,7 +629,7 @@ Both possibilities are described in the following.
 	Example::
 
 		#scripts/lxdialog/Makefile
-		hostprogs-y   := lxdialog
+		hostprogs     := lxdialog
 		lxdialog-objs := checklist.o lxdialog.o
 
 	Objects with extension .o are compiled from the corresponding .c
@@ -650,7 +649,7 @@ Both possibilities are described in the following.
 	Example::
 
 		#scripts/kconfig/Makefile
-		hostprogs-y   := qconf
+		hostprogs     := qconf
 		qconf-cxxobjs := qconf.o
 
 	In the example above the executable is composed of the C++ file
@@ -662,7 +661,7 @@ Both possibilities are described in the following.
 	Example::
 
 		#scripts/kconfig/Makefile
-		hostprogs-y   := qconf
+		hostprogs     := qconf
 		qconf-cxxobjs := qconf.o
 		qconf-objs    := check.o
 
@@ -710,55 +709,39 @@ Both possibilities are described in the following.
 	Example::
 
 		#drivers/pci/Makefile
-		hostprogs-y := gen-devlist
+		hostprogs := gen-devlist
 		$(obj)/devlist.h: $(src)/pci.ids $(obj)/gen-devlist
 			( cd $(obj); ./gen-devlist ) < $<
 
 	The target $(obj)/devlist.h will not be built before
 	$(obj)/gen-devlist is updated. Note that references to
 	the host programs in special rules must be prefixed with $(obj).
 
-	(2) Use $(always)
+	(2) Use always-y
 
 	When there is no suitable special rule, and the host program
-	shall be built when a makefile is entered, the $(always)
+	shall be built when a makefile is entered, the always-y
 	variable shall be used.
 
 	Example::
 
 		#scripts/lxdialog/Makefile
-		hostprogs-y   := lxdialog
-		always        := $(hostprogs-y)
+		hostprogs     := lxdialog
+		always-y      := $(hostprogs)
 
 	This will tell kbuild to build lxdialog even if not referenced in
 	any rule.
 
-4.6 Using hostprogs-$(CONFIG_FOO)
----------------------------------
-
-	A typical pattern in a Kbuild file looks like this:
-
-	Example::
-
-		#scripts/Makefile
-		hostprogs-$(CONFIG_KALLSYMS) += kallsyms
-
-	Kbuild knows about both 'y' for built-in and 'm' for module.
-	So if a config symbol evaluates to 'm', kbuild will still build
-	the binary. In other words, Kbuild handles hostprogs-m exactly
-	like hostprogs-y. But only hostprogs-y is recommended to be used
-	when no CONFIG symbols are involved.
-
 5 Kbuild clean infrastructure
 =============================
 
 "make clean" deletes most generated files in the obj tree where the kernel
 is compiled. This includes generated files such as host programs.
-Kbuild knows targets listed in $(hostprogs-y), $(hostprogs-m), $(always),
-$(extra-y) and $(targets). They are all deleted during "make clean".
-Files matching the patterns "*.[oas]", "*.ko", plus some additional files
-generated by kbuild are deleted all over the kernel src tree when
-"make clean" is executed.
+Kbuild knows targets listed in $(hostprogs), $(always-y), $(always-m),
+$(always-), $(extra-y), $(extra-) and $(targets). They are all deleted
+during "make clean". Files matching the patterns "*.[oas]", "*.ko", plus
+some additional files generated by kbuild are deleted all over the kernel
+source tree when "make clean" is executed.
 
 Additional files or directories can be specified in kbuild makefiles by use of
 $(clean-files).
@@ -1269,12 +1252,12 @@ When kbuild executes, the following steps are followed (roughly):
 	Example::
 
 		#arch/x86/kernel/Makefile
-		always := vmlinux.lds
+		extra-y := vmlinux.lds
 
 		#Makefile
 		export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
 
-	The assignment to $(always) is used to tell kbuild to build the
+	The assignment to extra-y is used to tell kbuild to build the
 	target vmlinux.lds.
 	The assignment to $(CPPFLAGS_vmlinux.lds) tells kbuild to use the
 	specified options when building the target vmlinux.lds.

Kbuild

@@ -7,7 +7,7 @@
 
 bounds-file := include/generated/bounds.h
 
-always  := $(bounds-file)
+always-y := $(bounds-file)
 targets := kernel/bounds.s
 
 $(bounds-file): kernel/bounds.s FORCE
@@ -28,7 +28,7 @@ $(timeconst-file): kernel/time/timeconst.bc FORCE
 
 offsets-file := include/generated/asm-offsets.h
 
-always  += $(offsets-file)
+always-y += $(offsets-file)
 targets += arch/$(SRCARCH)/kernel/asm-offsets.s
 
 arch/$(SRCARCH)/kernel/asm-offsets.s: $(timeconst-file) $(bounds-file)
@@ -39,7 +39,7 @@ $(offsets-file): arch/$(SRCARCH)/kernel/asm-offsets.s FORCE
 #####
 # Check for missing system calls
 
-always += missing-syscalls
+always-y += missing-syscalls
 
 quiet_cmd_syscalls = CALL    $<
       cmd_syscalls = $(CONFIG_SHELL) $< $(CC) $(c_flags) $(missing_syscalls_flags)
@@ -50,7 +50,7 @@ missing-syscalls: scripts/checksyscalls.sh $(offsets-file) FORCE
 #####
 # Check atomic headers are up-to-date
 
-always += old-atomics
+always-y += old-atomics
 
 quiet_cmd_atomics = CALL    $<
       cmd_atomics = $(CONFIG_SHELL) $<

Makefile

@@ -1679,7 +1679,7 @@ PHONY += descend $(build-dirs)
 descend: $(build-dirs)
 $(build-dirs): prepare
 	$(Q)$(MAKE) $(build)=$@ \
-	single-build=$(if $(filter-out $@/, $(single-no-ko)),1) \
+	single-build=$(if $(filter-out $@/, $(filter $@/%, $(single-no-ko))),1) \
 	need-builtin=1 need-modorder=1
 
 clean-dirs := $(addprefix _clean_, $(clean-dirs))

arch/alpha/boot/Makefile

@@ -8,7 +8,7 @@
 # Copyright (C) 1994 by Linus Torvalds
 #
 
-hostprogs-y	:= tools/mkbb tools/objstrip
+hostprogs	:= tools/mkbb tools/objstrip
 targets		:= vmlinux.gz vmlinux \
 		   vmlinux.nh tools/lxboot tools/bootlx tools/bootph \
 		   tools/bootpzh bootloader bootpheader bootpzheader 

arch/arm/vdso/Makefile

@@ -5,7 +5,7 @@
 ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32
 include $(srctree)/lib/vdso/Makefile
 
-hostprogs-y := vdsomunge
+hostprogs := vdsomunge
 
 obj-vdso := vgettimeofday.o datapage.o note.o
 

arch/arm64/kernel/vdso32/Makefile

@@ -115,9 +115,9 @@ VDSO_LDFLAGS += $(call cc32-ldoption,-fuse-ld=bfd)
 
 # Borrow vdsomunge.c from the arm vDSO
 # We have to use a relative path because scripts/Makefile.host prefixes
-# $(hostprogs-y) with $(obj)
+# $(hostprogs) with $(obj)
 munge := ../../../arm/vdso/vdsomunge
-hostprogs-y := $(munge)
+hostprogs := $(munge)
 
 c-obj-vdso := note.o
 c-obj-vdso-gettimeofday := vgettimeofday.o

arch/mips/boot/Makefile

@@ -21,7 +21,7 @@ endif
 drop-sections := .reginfo .mdebug .comment .note .pdr .options .MIPS.options
 strip-flags   := $(addprefix --remove-section=,$(drop-sections))
 
-hostprogs-y := elf2ecoff
+hostprogs := elf2ecoff
 
 suffix-y			:= bin
 suffix-$(CONFIG_KERNEL_BZIP2)	:= bz2

arch/mips/boot/compressed/Makefile

@@ -84,7 +84,7 @@ $(obj)/piggy.o: $(obj)/dummy.o $(obj)/vmlinux.bin.z FORCE
 HOSTCFLAGS_calc_vmlinuz_load_addr.o += $(LINUXINCLUDE)
 
 # Calculate the load address of the compressed kernel image
-hostprogs-y := calc_vmlinuz_load_addr
+hostprogs := calc_vmlinuz_load_addr
 
 ifneq ($(zload-y),)
 VMLINUZ_LOAD_ADDRESS := $(zload-y)
@@ -112,7 +112,7 @@ ifdef CONFIG_MACH_DECSTATION
 endif
 
 # elf2ecoff can only handle 32bit image
-hostprogs-y += ../elf2ecoff
+hostprogs += ../elf2ecoff
 
 ifdef CONFIG_32BIT
 	VMLINUZ = vmlinuz

arch/mips/boot/tools/Makefile

@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-hostprogs-y	+= relocs
+hostprogs	+= relocs
 relocs-objs	+= relocs_32.o
 relocs-objs	+= relocs_64.o
 relocs-objs	+= relocs_main.o

arch/mips/tools/Makefile

@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
-hostprogs-y := elf-entry
+hostprogs := elf-entry
 PHONY += elf-entry
 elf-entry: $(obj)/elf-entry
 	@:
 
-hostprogs-$(CONFIG_CPU_LOONGSON3_WORKAROUNDS) += loongson3-llsc-check
+hostprogs += loongson3-llsc-check
 PHONY += loongson3-llsc-check
 loongson3-llsc-check: $(obj)/loongson3-llsc-check
 	@:

arch/mips/vdso/Makefile

@@ -100,7 +100,7 @@ $(obj)/%.so.raw: OBJCOPYFLAGS := -S
 $(obj)/%.so.raw: $(obj)/%.so.dbg.raw FORCE
 	$(call if_changed,objcopy)
 
-hostprogs-y := genvdso
+hostprogs := genvdso
 
 quiet_cmd_genvdso = GENVDSO $@
 define cmd_genvdso

arch/powerpc/boot/Makefile

@@ -224,7 +224,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
 $(obj)/wrapper.a: $(obj-wlib) FORCE
 	$(call if_changed,bootar)
 
-hostprogs-y	:= addnote hack-coff mktree
+hostprogs	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
 extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
@@ -464,7 +464,7 @@ WRAPPER_BINDIR := /usr/sbin
 INSTALL := install
 
 extra-installed		:= $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
-hostprogs-installed	:= $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y))
+hostprogs-installed	:= $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs))
 wrapper-installed	:= $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
 dts-installed		:= $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
 

arch/s390/tools/Makefile

@@ -10,8 +10,8 @@ PHONY += kapi
 
 kapi:	$(kapi-hdrs-y)
 
-hostprogs-y		    += gen_facilities
-hostprogs-y		    += gen_opcode_table
+hostprogs		    += gen_facilities
+hostprogs		    += gen_opcode_table
 
 HOSTCFLAGS_gen_facilities.o += $(LINUXINCLUDE)
 

arch/sparc/boot/Makefile

@@ -7,7 +7,7 @@
 ROOT_IMG	:= /usr/src/root.img
 ELFTOAOUT	:= elftoaout
 
-hostprogs-y	:= piggyback
+hostprogs	:= piggyback
 targets		:= tftpboot.img image zImage vmlinux.aout
 clean-files	:= System.map
 

arch/sparc/vdso/Makefile

@@ -41,7 +41,7 @@ $(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE
 	$(call if_changed,vdso)
 
 HOST_EXTRACFLAGS += -I$(srctree)/tools/include
-hostprogs-y			+= vdso2c
+hostprogs += vdso2c
 
 quiet_cmd_vdso2c = VDSO2C  $@
       cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@

arch/x86/boot/Makefile

@@ -45,8 +45,8 @@ setup-y		+= video-vesa.o
 setup-y		+= video-bios.o
 
 targets		+= $(setup-y)
-hostprogs-y	:= tools/build
-hostprogs-$(CONFIG_X86_FEATURE_NAMES) += mkcpustr
+hostprogs	:= tools/build
+hostprogs	+= mkcpustr
 
 HOST_EXTRACFLAGS += -I$(srctree)/tools/include \
 		    -include include/generated/autoconf.h \

arch/x86/boot/compressed/Makefile

@@ -58,7 +58,7 @@ KBUILD_LDFLAGS += $(shell $(LD) --help 2>&1 | grep -q "\-z noreloc-overflow" \
 endif
 LDFLAGS_vmlinux := -T
 
-hostprogs-y	:= mkpiggy
+hostprogs	:= mkpiggy
 HOST_EXTRACFLAGS += -I$(srctree)/tools/include
 
 sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABCDGRSTVW] \(_text\|__bss_start\|_end\)$$/\#define VO_\2 _AC(0x\1,UL)/p'

arch/x86/entry/vdso/Makefile

@@ -59,7 +59,7 @@ $(obj)/vdso64.so.dbg: $(obj)/vdso.lds $(vobjs) FORCE
 	$(call if_changed,vdso_and_check)
 
 HOST_EXTRACFLAGS += -I$(srctree)/tools/include -I$(srctree)/include/uapi -I$(srctree)/arch/$(SUBARCH)/include/uapi
-hostprogs-y			+= vdso2c
+hostprogs += vdso2c
 
 quiet_cmd_vdso2c = VDSO2C  $@
       cmd_vdso2c = $(obj)/vdso2c $< $(<:%.dbg=%) $@

arch/x86/realmode/rm/Makefile

@@ -12,7 +12,7 @@ OBJECT_FILES_NON_STANDARD	:= y
 # Prevents link failures: __sanitizer_cov_trace_pc() is not linked in.
 KCOV_INSTRUMENT		:= n
 
-always := realmode.bin realmode.relocs
+always-y := realmode.bin realmode.relocs
 
 wakeup-objs	:= wakeup_asm.o wakemain.o video-mode.o
 wakeup-objs	+= copy.o bioscall.o regs.o

arch/x86/tools/Makefile

@@ -26,7 +26,7 @@ posttest: $(obj)/insn_decoder_test vmlinux $(obj)/insn_sanity
 	$(call cmd,posttest)
 	$(call cmd,sanitytest)
 
-hostprogs-y	+= insn_decoder_test insn_sanity
+hostprogs += insn_decoder_test insn_sanity
 
 # -I needed for generated C source and C source which in the kernel tree.
 HOSTCFLAGS_insn_decoder_test.o := -Wall -I$(objtree)/arch/x86/lib/ -I$(srctree)/arch/x86/include/uapi/ -I$(srctree)/arch/x86/include/ -I$(srctree)/arch/x86/lib/ -I$(srctree)/include/uapi/
@@ -39,7 +39,7 @@ $(obj)/insn_decoder_test.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/l
 $(obj)/insn_sanity.o: $(srctree)/arch/x86/lib/insn.c $(srctree)/arch/x86/lib/inat.c $(srctree)/arch/x86/include/asm/inat_types.h $(srctree)/arch/x86/include/asm/inat.h $(srctree)/arch/x86/include/asm/insn.h $(objtree)/arch/x86/lib/inat-tables.c
 
 HOST_EXTRACFLAGS += -I$(srctree)/tools/include
-hostprogs-y	+= relocs
+hostprogs	+= relocs
 relocs-objs     := relocs_32.o relocs_64.o relocs_common.o
 PHONY += relocs
 relocs: $(obj)/relocs

drivers/gpu/drm/radeon/Makefile

@@ -5,7 +5,7 @@
 
 ccflags-y := -Idrivers/gpu/drm/amd/include
 
-hostprogs-y := mkregtable
+hostprogs := mkregtable
 clean-files := rn50_reg_safe.h r100_reg_safe.h r200_reg_safe.h rv515_reg_safe.h r300_reg_safe.h r420_reg_safe.h rs600_reg_safe.h r600_reg_safe.h evergreen_reg_safe.h cayman_reg_safe.h
 
 quiet_cmd_mkregtable = MKREGTABLE $@

drivers/tty/vt/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_HW_CONSOLE)		+= vt.o defkeymap.o
 # Files generated that shall be removed upon make clean
 clean-files := consolemap_deftbl.c defkeymap.c
 
-hostprogs-y += conmakehash
+hostprogs += conmakehash
 
 quiet_cmd_conmk = CONMK   $@
       cmd_conmk = $(obj)/conmakehash $< > $@