xhci: Fix front USB ports on ASUS PRIME B350M-A

When a USB device gets plugged on ASUS PRIME B350M-A's front ports, the
xHC stops working:
[  549.114587] xhci_hcd 0000:02:00.0: WARN: xHC CMD_RUN timeout
[  549.114608] suspend_common(): xhci_pci_suspend+0x0/0xc0 returns -110
[  549.114638] xhci_hcd 0000:02:00.0: can't suspend (hcd_pci_runtime_suspend returned -110)

Delay before running xHC command CMD_RUN can workaround the issue.

Use a new quirk to make the delay only targets to the affected xHC.

Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Mathias Nyman <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: khfeng

drivers/usb/host/xhci-pci.c

@@ -126,6 +126,9 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
 
+	if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x43bb)
+		xhci->quirks |= XHCI_SUSPEND_DELAY;
+
 	if (pdev->vendor == PCI_VENDOR_ID_AMD)
 		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 

drivers/usb/host/xhci.c

@@ -877,6 +877,9 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
 	clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
 	del_timer_sync(&xhci->shared_hcd->rh_timer);
 
+	if (xhci->quirks & XHCI_SUSPEND_DELAY)
+		usleep_range(1000, 1500);
+
 	spin_lock_irq(&xhci->lock);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);

drivers/usb/host/xhci.h

@@ -1826,6 +1826,7 @@ struct xhci_hcd {
 #define XHCI_U2_DISABLE_WAKE	(1 << 27)
 #define XHCI_ASMEDIA_MODIFY_FLOWCONTROL	(1 << 28)
 #define XHCI_HW_LPM_DISABLE	(1 << 29)
+#define XHCI_SUSPEND_DELAY	(1 << 30)
 
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;