Merge branch 'topic/pci-cleanup' into for-next

Author: tiwai

Documentation/devicetree/bindings/input/gpio-keys.txt

@@ -10,19 +10,23 @@ Optional properties:
 Each button (key) is represented as a sub-node of "gpio-keys":
 Subnode properties:
 
+	- gpios: OF device-tree gpio specification.
+	- interrupts: the interrupt line for that input.
 	- label: Descriptive name of the key.
 	- linux,code: Keycode to emit.
 
-Required mutual exclusive subnode-properties:
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input
+Note that either "interrupts" or "gpios" properties can be omitted, but not
+both at the same time. Specifying both properties is allowed.
 
 Optional subnode-properties:
 	- linux,input-type: Specify event type this button/key generates.
 	  If not specified defaults to <1> == EV_KEY.
 	- debounce-interval: Debouncing interval time in milliseconds.
 	  If not specified defaults to 5.
 	- gpio-key,wakeup: Boolean, button can wake-up the system.
+	- linux,can-disable: Boolean, indicates that button is connected
+	  to dedicated (not shared) interrupt which can be disabled to
+	  suppress events from the button.
 
 Example nodes:
 

Documentation/devicetree/bindings/input/stmpe-keypad.txt

@@ -8,6 +8,8 @@ Optional properties:
  - debounce-interval        : Debouncing interval time in milliseconds
  - st,scan-count            : Scanning cycles elapsed before key data is updated
  - st,no-autorepeat         : If specified device will not autorepeat
+ - keypad,num-rows          : See ./matrix-keymap.txt
+ - keypad,num-columns       : See ./matrix-keymap.txt
 
 Example:
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 19
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Diseased Newt
 
 # *DOCUMENTATION*

arch/arm/boot/dts/armada-370-db.dts

@@ -203,27 +203,3 @@
 		compatible = "linux,spdif-dir";
 	};
 };
-
-&pinctrl {
-	/*
-	 * These pins might be muxed as I2S by
-	 * the bootloader, but it conflicts
-	 * with the real I2S pins that are
-	 * muxed using i2s_pins. We must mux
-	 * those pins to a function other than
-	 * I2S.
-	 */
-	pinctrl-0 = <&hog_pins1 &hog_pins2>;
-	pinctrl-names = "default";
-
-	hog_pins1: hog-pins1 {
-		marvell,pins = "mpp6",  "mpp8", "mpp10",
-			       "mpp12", "mpp13";
-		marvell,function = "gpio";
-	};
-
-	hog_pins2: hog-pins2 {
-		marvell,pins = "mpp5", "mpp7", "mpp9";
-		marvell,function = "gpo";
-	};
-};

arch/arm/configs/multi_v7_defconfig

@@ -338,6 +338,7 @@ CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_MVEBU=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_EXYNOS=y
 CONFIG_USB_EHCI_TEGRA=y
 CONFIG_USB_EHCI_HCD_STI=y
 CONFIG_USB_EHCI_HCD_PLATFORM=y

arch/arm/kernel/setup.c

@@ -1046,6 +1046,15 @@ static int c_show(struct seq_file *m, void *v)
 		seq_printf(m, "model name\t: %s rev %d (%s)\n",
 			   cpu_name, cpuid & 15, elf_platform);
 
+#if defined(CONFIG_SMP)
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   per_cpu(cpu_data, i).loops_per_jiffy / (500000UL/HZ),
+			   (per_cpu(cpu_data, i).loops_per_jiffy / (5000UL/HZ)) % 100);
+#else
+		seq_printf(m, "BogoMIPS\t: %lu.%02lu\n",
+			   loops_per_jiffy / (500000/HZ),
+			   (loops_per_jiffy / (5000/HZ)) % 100);
+#endif
 		/* dump out the processor features */
 		seq_puts(m, "Features\t: ");
 

arch/arm/kernel/smp.c

@@ -387,6 +387,18 @@ asmlinkage void secondary_start_kernel(void)
 
 void __init smp_cpus_done(unsigned int max_cpus)
 {
+	int cpu;
+	unsigned long bogosum = 0;
+
+	for_each_online_cpu(cpu)
+		bogosum += per_cpu(cpu_data, cpu).loops_per_jiffy;
+
+	printk(KERN_INFO "SMP: Total of %d processors activated "
+	       "(%lu.%02lu BogoMIPS).\n",
+	       num_online_cpus(),
+	       bogosum / (500000/HZ),
+	       (bogosum / (5000/HZ)) % 100);
+
 	hyp_mode_check();
 }
 

arch/arm64/configs/defconfig

@@ -1,6 +1,7 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
@@ -13,14 +14,12 @@ CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_RESOURCE_COUNTERS=y
 CONFIG_MEMCG=y
 CONFIG_MEMCG_SWAP=y
 CONFIG_MEMCG_KMEM=y
 CONFIG_CGROUP_HUGETLB=y
 # CONFIG_UTS_NS is not set
 # CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_NET_NS is not set
 CONFIG_SCHED_AUTOGROUP=y
 CONFIG_BLK_DEV_INITRD=y
@@ -92,7 +91,6 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_VIRTIO_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
-# CONFIG_HMC_DRV is not set
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_PL061=y
@@ -133,6 +131,8 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT4_FS=y
 CONFIG_FANOTIFY=y
 CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=y
 CONFIG_CUSE=y
 CONFIG_VFAT_FS=y
@@ -152,14 +152,15 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOCKUP_DETECTOR=y
 # CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_FTRACE is not set
+CONFIG_KEYS=y
 CONFIG_SECURITY=y
 CONFIG_CRYPTO_ANSI_CPRNG=y
 CONFIG_ARM64_CRYPTO=y
 CONFIG_CRYPTO_SHA1_ARM64_CE=y
 CONFIG_CRYPTO_SHA2_ARM64_CE=y
 CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
 CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
 CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
 CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y

arch/arm64/include/asm/dma-mapping.h

@@ -52,13 +52,14 @@ static inline void set_dma_ops(struct device *dev, struct dma_map_ops *ops)
 	dev->archdata.dma_ops = ops;
 }
 
-static inline int set_arch_dma_coherent_ops(struct device *dev)
+static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
+				      struct iommu_ops *iommu, bool coherent)
 {
-	dev->archdata.dma_coherent = true;
-	set_dma_ops(dev, &coherent_swiotlb_dma_ops);
-	return 0;
+	dev->archdata.dma_coherent = coherent;
+	if (coherent)
+		set_dma_ops(dev, &coherent_swiotlb_dma_ops);
 }
-#define set_arch_dma_coherent_ops	set_arch_dma_coherent_ops
+#define arch_setup_dma_ops	arch_setup_dma_ops
 
 /* do not use this function in a driver */
 static inline bool is_device_dma_coherent(struct device *dev)

arch/arm64/include/asm/pgtable.h

@@ -298,7 +298,6 @@ void pmdp_splitting_flush(struct vm_area_struct *vma, unsigned long address,
 #define pfn_pmd(pfn,prot)	(__pmd(((phys_addr_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
 #define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
 
-#define pmd_page(pmd)           pfn_to_page(__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
 #define pud_write(pud)		pte_write(pud_pte(pud))
 #define pud_pfn(pud)		(((pud_val(pud) & PUD_MASK) & PHYS_MASK) >> PAGE_SHIFT)
 
@@ -401,7 +400,7 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
 	return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(addr);
 }
 
-#define pud_page(pud)           pmd_page(pud_pmd(pud))
+#define pud_page(pud)		pfn_to_page(__phys_to_pfn(pud_val(pud) & PHYS_MASK))
 
 #endif	/* CONFIG_ARM64_PGTABLE_LEVELS > 2 */
 
@@ -437,6 +436,8 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long addr)
 	return (pud_t *)pgd_page_vaddr(*pgd) + pud_index(addr);
 }
 
+#define pgd_page(pgd)		pfn_to_page(__phys_to_pfn(pgd_val(pgd) & PHYS_MASK))
+
 #endif  /* CONFIG_ARM64_PGTABLE_LEVELS > 3 */
 
 #define pgd_ERROR(pgd)		__pgd_error(__FILE__, __LINE__, pgd_val(pgd))

arch/arm64/kernel/suspend.c

@@ -5,6 +5,7 @@
 #include <asm/debug-monitors.h>
 #include <asm/pgtable.h>
 #include <asm/memory.h>
+#include <asm/mmu_context.h>
 #include <asm/smp_plat.h>
 #include <asm/suspend.h>
 #include <asm/tlbflush.h>
@@ -98,7 +99,18 @@ int __cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
 	 */
 	ret = __cpu_suspend_enter(arg, fn);
 	if (ret == 0) {
-		cpu_switch_mm(mm->pgd, mm);
+		/*
+		 * We are resuming from reset with TTBR0_EL1 set to the
+		 * idmap to enable the MMU; restore the active_mm mappings in
+		 * TTBR0_EL1 unless the active_mm == &init_mm, in which case
+		 * the thread entered __cpu_suspend with TTBR0_EL1 set to
+		 * reserved TTBR0 page tables and should be restored as such.
+		 */
+		if (mm == &init_mm)
+			cpu_set_reserved_ttbr0();
+		else
+			cpu_switch_mm(mm->pgd, mm);
+
 		flush_tlb_all();
 
 		/*

arch/ia64/include/asm/unistd.h

@@ -11,7 +11,7 @@
 
 
 
-#define NR_syscalls			318 /* length of syscall table */
+#define NR_syscalls			319 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about

arch/ia64/include/uapi/asm/unistd.h

@@ -331,5 +331,6 @@
 #define __NR_getrandom			1339
 #define __NR_memfd_create		1340
 #define __NR_bpf			1341
+#define __NR_execveat			1342
 
 #endif /* _UAPI_ASM_IA64_UNISTD_H */

arch/ia64/kernel/entry.S

@@ -1779,6 +1779,7 @@ sys_call_table:
 	data8 sys_getrandom
 	data8 sys_memfd_create			// 1340
 	data8 sys_bpf
+	data8 sys_execveat
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */

arch/nios2/kernel/cpuinfo.c

@@ -72,6 +72,7 @@ void __init setup_cpuinfo(void)
 	cpuinfo.has_div = fcpu_has(cpu, "altr,has-div");
 	cpuinfo.has_mul = fcpu_has(cpu, "altr,has-mul");
 	cpuinfo.has_mulx = fcpu_has(cpu, "altr,has-mulx");
+	cpuinfo.mmu = fcpu_has(cpu, "altr,has-mmu");
 
 	if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
 		err_cpu("DIV");

arch/nios2/kernel/entry.S

@@ -365,30 +365,14 @@ ENTRY(ret_from_interrupt)
 	GET_THREAD_INFO	r1
 	ldw	r4, TI_PREEMPT_COUNT(r1)
 	bne	r4, r0, restore_all
-
-need_resched:
 	ldw	r4, TI_FLAGS(r1)		/* ? Need resched set */
 	BTBZ	r10, r4, TIF_NEED_RESCHED, restore_all
 	ldw	r4, PT_ESTATUS(sp)	/* ? Interrupts off */
 	andi	r10, r4, ESTATUS_EPIE
 	beq	r10, r0, restore_all
-	movia	r4, PREEMPT_ACTIVE
-	stw	r4, TI_PREEMPT_COUNT(r1)
-	rdctl	r10, status		/* enable intrs again */
-	ori	r10, r10 ,STATUS_PIE
-	wrctl	status, r10
-	PUSH	r1
-	call	schedule
-	POP	r1
-	mov	r4, r0
-	stw	r4, TI_PREEMPT_COUNT(r1)
-	rdctl	r10, status		/* disable intrs */
-	andi	r10, r10, %lo(~STATUS_PIE)
-	wrctl	status, r10
-	br	need_resched
-#else
-	br	restore_all
+	call	preempt_schedule_irq
 #endif
+	br	restore_all
 
 /***********************************************************************
  * A few syscall wrappers

arch/parisc/include/asm/ldcw.h

@@ -33,11 +33,18 @@
 
 #endif /*!CONFIG_PA20*/
 
-/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
+/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.
+   We don't explicitly expose that "*a" may be written as reload
+   fails to find a register in class R1_REGS when "a" needs to be
+   reloaded when generating 64-bit PIC code.  Instead, we clobber
+   memory to indicate to the compiler that the assembly code reads
+   or writes to items other than those listed in the input and output
+   operands.  This may pessimize the code somewhat but __ldcw is
+   usually used within code blocks surrounded by memory barriors.  */
 #define __ldcw(a) ({						\
 	unsigned __ret;						\
-	__asm__ __volatile__(__LDCW " 0(%2),%0"			\
-		: "=r" (__ret), "+m" (*(a)) : "r" (a));		\
+	__asm__ __volatile__(__LDCW " 0(%1),%0"			\
+		: "=r" (__ret) : "r" (a) : "memory");		\
 	__ret;							\
 })
 

arch/powerpc/include/asm/kexec.h

@@ -86,6 +86,11 @@ extern int overlaps_crashkernel(unsigned long start, unsigned long size);
 extern void reserve_crashkernel(void);
 extern void machine_kexec_mask_interrupts(void);
 
+static inline bool kdump_in_progress(void)
+{
+	return crashing_cpu >= 0;
+}
+
 #else /* !CONFIG_KEXEC */
 static inline void crash_kexec_secondary(struct pt_regs *regs) { }
 
@@ -106,6 +111,11 @@ static inline int crash_shutdown_unregister(crash_shutdown_t handler)
 	return 0;
 }
 
+static inline bool kdump_in_progress(void)
+{
+	return false;
+}
+
 #endif /* CONFIG_KEXEC */
 #endif /* ! __ASSEMBLY__ */
 #endif /* __KERNEL__ */

arch/powerpc/include/asm/systbl.h

@@ -366,3 +366,4 @@ SYSCALL_SPU(seccomp)
 SYSCALL_SPU(getrandom)
 SYSCALL_SPU(memfd_create)
 SYSCALL_SPU(bpf)
+COMPAT_SYS(execveat)

arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define __NR_syscalls		362
+#define __NR_syscalls		363
 
 #define __NR__exit __NR_exit
 #define NR_syscalls	__NR_syscalls

arch/powerpc/include/uapi/asm/unistd.h

@@ -384,5 +384,6 @@
 #define __NR_getrandom		359
 #define __NR_memfd_create	360
 #define __NR_bpf		361
+#define __NR_execveat		362
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kernel/machine_kexec_64.c

@@ -330,7 +330,7 @@ void default_machine_kexec(struct kimage *image)
         * using debugger IPI.
         */
 
-	if (crashing_cpu == -1)
+	if (!kdump_in_progress())
 		kexec_prepare_cpus();
 
 	pr_debug("kexec: Starting switchover sequence.\n");