Skip to content

Commit 41561f2

Browse files
vwoolJean Delvare
vwool
authored and
Jean Delvare
committed
i2c: New Philips PNX bus driver
New I2C bus driver for Philips ARM boards (Philips IP3204 I2C IP block). This I2C controller can be found on (at least) PNX010x, PNX52xx and PNX4008 Philips boards. Signed-off-by: Vitaly Wool <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
1 parent 51fd554 commit 41561f2

File tree

7 files changed

+1006
-1
lines changed

7 files changed

+1006
-1
lines changed

‎arch/arm/mach-pnx4008/Makefile

Lines changed: 1 addition & 1 deletion
Original file line numberDiff line numberDiff line change
@@ -2,7 +2,7 @@
22
# Makefile for the linux kernel.
33
#
44

5-
obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o
5+
obj-y := core.o irq.o time.o clock.o gpio.o serial.o dma.o i2c.o
66
obj-m :=
77
obj-n :=
88
obj- :=

‎arch/arm/mach-pnx4008/i2c.c

Lines changed: 167 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,167 @@
1+
/*
2+
* I2C initialization for PNX4008.
3+
*
4+
* Author: Vitaly Wool <[email protected]>
5+
*
6+
* 2005-2006 (c) MontaVista Software, Inc. This file is licensed under
7+
* the terms of the GNU General Public License version 2. This program
8+
* is licensed "as is" without any warranty of any kind, whether express
9+
* or implied.
10+
*/
11+
12+
#include <linux/clk.h>
13+
#include <linux/i2c.h>
14+
#include <linux/i2c-pnx.h>
15+
#include <linux/platform_device.h>
16+
#include <linux/err.h>
17+
#include <asm/arch/platform.h>
18+
#include <asm/arch/i2c.h>
19+
20+
static int set_clock_run(struct platform_device *pdev)
21+
{
22+
struct clk *clk;
23+
char name[10];
24+
int retval = 0;
25+
26+
snprintf(name, 10, "i2c%d_ck", pdev->id);
27+
clk = clk_get(&pdev->dev, name);
28+
if (!IS_ERR(clk)) {
29+
clk_set_rate(clk, 1);
30+
clk_put(clk);
31+
} else
32+
retval = -ENOENT;
33+
34+
return retval;
35+
}
36+
37+
static int set_clock_stop(struct platform_device *pdev)
38+
{
39+
struct clk *clk;
40+
char name[10];
41+
int retval = 0;
42+
43+
snprintf(name, 10, "i2c%d_ck", pdev->id);
44+
clk = clk_get(&pdev->dev, name);
45+
if (!IS_ERR(clk)) {
46+
clk_set_rate(clk, 0);
47+
clk_put(clk);
48+
} else
49+
retval = -ENOENT;
50+
51+
return retval;
52+
}
53+
54+
static int i2c_pnx_suspend(struct platform_device *pdev, pm_message_t state)
55+
{
56+
int retval = 0;
57+
#ifdef CONFIG_PM
58+
retval = set_clock_run(pdev);
59+
#endif
60+
return retval;
61+
}
62+
63+
static int i2c_pnx_resume(struct platform_device *pdev)
64+
{
65+
int retval = 0;
66+
#ifdef CONFIG_PM
67+
retval = set_clock_run(pdev);
68+
#endif
69+
return retval;
70+
}
71+
72+
static u32 calculate_input_freq(struct platform_device *pdev)
73+
{
74+
return HCLK_MHZ;
75+
}
76+
77+
78+
static struct i2c_pnx_algo_data pnx_algo_data0 = {
79+
.base = PNX4008_I2C1_BASE,
80+
.irq = I2C_1_INT,
81+
};
82+
83+
static struct i2c_pnx_algo_data pnx_algo_data1 = {
84+
.base = PNX4008_I2C2_BASE,
85+
.irq = I2C_2_INT,
86+
};
87+
88+
static struct i2c_pnx_algo_data pnx_algo_data2 = {
89+
.base = (PNX4008_USB_CONFIG_BASE + 0x300),
90+
.irq = USB_I2C_INT,
91+
};
92+
93+
static struct i2c_adapter pnx_adapter0 = {
94+
.name = I2C_CHIP_NAME "0",
95+
.algo_data = &pnx_algo_data0,
96+
};
97+
static struct i2c_adapter pnx_adapter1 = {
98+
.name = I2C_CHIP_NAME "1",
99+
.algo_data = &pnx_algo_data1,
100+
};
101+
102+
static struct i2c_adapter pnx_adapter2 = {
103+
.name = "USB-I2C",
104+
.algo_data = &pnx_algo_data2,
105+
};
106+
107+
static struct i2c_pnx_data i2c0_data = {
108+
.suspend = i2c_pnx_suspend,
109+
.resume = i2c_pnx_resume,
110+
.calculate_input_freq = calculate_input_freq,
111+
.set_clock_run = set_clock_run,
112+
.set_clock_stop = set_clock_stop,
113+
.adapter = &pnx_adapter0,
114+
};
115+
116+
static struct i2c_pnx_data i2c1_data = {
117+
.suspend = i2c_pnx_suspend,
118+
.resume = i2c_pnx_resume,
119+
.calculate_input_freq = calculate_input_freq,
120+
.set_clock_run = set_clock_run,
121+
.set_clock_stop = set_clock_stop,
122+
.adapter = &pnx_adapter1,
123+
};
124+
125+
static struct i2c_pnx_data i2c2_data = {
126+
.suspend = i2c_pnx_suspend,
127+
.resume = i2c_pnx_resume,
128+
.calculate_input_freq = calculate_input_freq,
129+
.set_clock_run = set_clock_run,
130+
.set_clock_stop = set_clock_stop,
131+
.adapter = &pnx_adapter2,
132+
};
133+
134+
static struct platform_device i2c0_device = {
135+
.name = "pnx-i2c",
136+
.id = 0,
137+
.dev = {
138+
.platform_data = &i2c0_data,
139+
},
140+
};
141+
142+
static struct platform_device i2c1_device = {
143+
.name = "pnx-i2c",
144+
.id = 1,
145+
.dev = {
146+
.platform_data = &i2c1_data,
147+
},
148+
};
149+
150+
static struct platform_device i2c2_device = {
151+
.name = "pnx-i2c",
152+
.id = 2,
153+
.dev = {
154+
.platform_data = &i2c2_data,
155+
},
156+
};
157+
158+
static struct platform_device *devices[] __initdata = {
159+
&i2c0_device,
160+
&i2c1_device,
161+
&i2c2_device,
162+
};
163+
164+
void __init pnx4008_register_i2c_devices(void)
165+
{
166+
platform_add_devices(devices, ARRAY_SIZE(devices));
167+
}

‎drivers/i2c/busses/Kconfig

Lines changed: 19 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -536,4 +536,23 @@ config I2C_MV64XXX
536536
This driver can also be built as a module. If so, the module
537537
will be called i2c-mv64xxx.
538538

539+
config I2C_PNX
540+
tristate "I2C bus support for Philips PNX targets"
541+
depends on ARCH_PNX4008 && I2C
542+
help
543+
This driver supports the Philips IP3204 I2C IP block master and/or
544+
slave controller
545+
546+
This driver can also be built as a module. If so, the module
547+
will be called i2c-pnx.
548+
549+
config I2C_PNX_EARLY
550+
bool "Early initialization for I2C on PNXxxxx"
551+
depends on I2C_PNX=y
552+
help
553+
Under certain circumstances one may need to make sure I2C on PNXxxxx
554+
is initialized earlier than some other driver that depends on it
555+
(for instance, that might be USB in case of PNX4008). With this
556+
option turned on you can guarantee that.
557+
539558
endmenu

‎drivers/i2c/busses/Makefile

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -28,6 +28,7 @@ obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
2828
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
2929
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
3030
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
31+
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
3132
obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
3233
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
3334
obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o

0 commit comments

Comments
 (0)