drivers/net: remove orphaned references to micro channel

We threw away the microchannel support, but the removal wasn't
completely trivial since there was namespace overlap with the
machine check support, and hence some orphaned dependencies
survived the deletion.  This attempts to sweep those up and
send them to the bit-bucket.

Signed-off-by: Paul Gortmaker <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Author: Paul Gortmaker

drivers/net/ethernet/3com/Kconfig

@@ -5,7 +5,7 @@
 config NET_VENDOR_3COM
 	bool "3Com devices"
 	default y
-	depends on ISA || EISA || MCA || PCI || PCMCIA
+	depends on ISA || EISA || PCI || PCMCIA
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -33,8 +33,8 @@ config EL1
 	  will be called 3c501.
 
 config EL3
-	tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
-	depends on (ISA || EISA || MCA)
+	tristate "3c509/3c579 \"EtherLink III\" support"
+	depends on (ISA || EISA)
 	---help---
 	  If you have a network (Ethernet) card belonging to the 3Com
 	  EtherLinkIII series, say Y and read the Ethernet-HOWTO, available

drivers/net/ethernet/8390/Kconfig

@@ -6,8 +6,8 @@ config NET_VENDOR_8390
 	bool "National Semi-conductor 8390 devices"
 	default y
 	depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
-		   ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
-		   MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \
+		   ISA || EISA || MAC || M32R || MACH_TX49XX || \
+		   H8300 || ARM || MIPS || ZORRO || PCMCIA || \
 		   EXPERIMENTAL)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
@@ -188,10 +188,7 @@ config NE2000
 
 	  If you have a PCI NE2000 card however, say N here and Y to "PCI
 	  NE2000 and clone support" under "EISA, VLB, PCI and on board
-	  controllers" below. If you have a NE2000 card and are running on
-	  an MCA system (a bus system used on some IBM PS/2 computers and
-	  laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
-	  below.
+	  controllers" below.
 
 	  To compile this driver as a module, choose M here. The module
 	  will be called ne.

drivers/net/ethernet/8390/Makefile

@@ -16,7 +16,6 @@ obj-$(CONFIG_HYDRA) += hydra.o 8390.o
 obj-$(CONFIG_LNE390) += lne390.o 8390.o
 obj-$(CONFIG_MCF8390) += mcf8390.o 8390.o
 obj-$(CONFIG_NE2000) += ne.o 8390p.o
-obj-$(CONFIG_NE2_MCA) += ne2.o 8390p.o
 obj-$(CONFIG_NE2K_PCI) += ne2k-pci.o 8390.o
 obj-$(CONFIG_NE3210) += ne3210.o 8390.o
 obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o

drivers/net/ethernet/amd/Kconfig

@@ -7,7 +7,7 @@ config NET_VENDOR_AMD
 	default y
 	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
 		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
-		   (ARM && ARCH_EBSA110) || ISA || EISA || MCA || PCMCIA
+		   (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA
 	---help---
 	  If you have a network (Ethernet) chipset belonging to this class,
 	  say Y.
@@ -107,7 +107,7 @@ config DECLANCE
 
 config DEPCA
 	tristate "DEPCA, DE10x, DE200, DE201, DE202, DE422 support"
-	depends on (ISA || EISA || MCA)
+	depends on (ISA || EISA)
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read

drivers/net/ethernet/fujitsu/Kconfig

@@ -5,7 +5,7 @@
 config NET_VENDOR_FUJITSU
 	bool "Fujitsu devices"
 	default y
-	depends on ISA || PCMCIA || ((ISA || MCA_LEGACY) && EXPERIMENTAL)
+	depends on ISA || PCMCIA || (ISA && EXPERIMENTAL)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y
 	  and read the Ethernet-HOWTO, available from
@@ -19,7 +19,7 @@ if NET_VENDOR_FUJITSU
 
 config AT1700
 	tristate "AT1700/1720 support (EXPERIMENTAL)"
-	depends on (ISA || MCA_LEGACY) && EXPERIMENTAL
+	depends on ISA && EXPERIMENTAL
 	select CRC32
 	---help---
 	  If you have a network (Ethernet) card of this type, say Y and read

drivers/net/ethernet/i825xx/Kconfig

@@ -6,7 +6,7 @@ config NET_VENDOR_I825XX
 	bool "Intel (82586/82593/82596) devices"
 	default y
 	depends on NET_VENDOR_INTEL && (ISA || ISA_DMA_API || ARM || \
-		   ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
+		   ARCH_ACORN || SNI_RM || SUN3 || \
 		   GSC || BVME6000 || MVME16x || EXPERIMENTAL)
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y

drivers/net/ethernet/intel/Kconfig

@@ -6,7 +6,7 @@ config NET_VENDOR_INTEL
 	bool "Intel devices"
 	default y
 	depends on PCI || PCI_MSI || ISA || ISA_DMA_API || ARM || \
-		   ARCH_ACORN || MCA || MCA_LEGACY || SNI_RM || SUN3 || \
+		   ARCH_ACORN || SNI_RM || SUN3 || \
 		   GSC || BVME6000 || MVME16x || \
 		   (ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR) || \
 		   EXPERIMENTAL