linux/dim: Move implementation to .c files

Moved all logic from dim.h and net_dim.h to dim.c and net_dim.c.
This is both more structurally appealing and would allow to only
expose externally used functions.

Signed-off-by: Tal Gilboa <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>

Author: talgimellanox

MAINTAINERS

@@ -5588,8 +5588,8 @@ F:	include/linux/dynamic_debug.h
 DYNAMIC INTERRUPT MODERATION
 M:	Tal Gilboa <[email protected]>
 S:	Maintained
-F:	include/linux/net_dim.h
 F:	include/linux/dim.h
+F:	lib/dim/
 
 DZ DECSTATION DZ11 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <[email protected]>

drivers/net/ethernet/broadcom/Kconfig

@@ -8,6 +8,7 @@ config NET_VENDOR_BROADCOM
 	default y
 	depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
 		   SIBYTE_SB1xxx_SOC
+	select DIMLIB
 	---help---
 	  If you have a network (Ethernet) chipset belonging to this class,
 	  say Y.

drivers/net/ethernet/broadcom/bcmsysport.h

@@ -14,7 +14,7 @@
 #include <linux/bitmap.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 /* Receive/transmit descriptor format */
 #define DESC_ADDR_HI_STATUS_LEN	0x00

drivers/net/ethernet/broadcom/bnxt/bnxt.h

@@ -23,7 +23,7 @@
 #include <net/devlink.h>
 #include <net/dst_metadata.h>
 #include <net/xdp.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 struct tx_bd {
 	__le32 tx_bd_len_flags_type;

drivers/net/ethernet/broadcom/bnxt/bnxt_debugfs.c

@@ -11,7 +11,7 @@
 #include <linux/module.h>
 #include <linux/pci.h>
 #include "bnxt_hsi.h"
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 #include "bnxt.h"
 #include "bnxt_debugfs.h"
 

drivers/net/ethernet/broadcom/bnxt/bnxt_dim.c

@@ -7,7 +7,7 @@
  * the Free Software Foundation.
  */
 
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 #include "bnxt_hsi.h"
 #include "bnxt.h"
 

drivers/net/ethernet/broadcom/genet/bcmgenet.h

@@ -16,7 +16,7 @@
 #include <linux/mii.h>
 #include <linux/if_vlan.h>
 #include <linux/phy.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 /* total number of Buffer Descriptors, same for Rx/Tx */
 #define TOTAL_DESC				256

drivers/net/ethernet/mellanox/mlx5/core/Kconfig

@@ -34,6 +34,7 @@ config MLX5_CORE_EN
 	depends on NETDEVICES && ETHERNET && INET && PCI && MLX5_CORE
 	depends on IPV6=y || IPV6=n || MLX5_CORE=m
 	select PAGE_POOL
+	select DIMLIB
 	default n
 	---help---
 	  Ethernet support in Mellanox Technologies ConnectX-4 NIC.

drivers/net/ethernet/mellanox/mlx5/core/en.h

@@ -48,7 +48,7 @@
 #include <linux/rhashtable.h>
 #include <net/switchdev.h>
 #include <net/xdp.h>
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 #include <linux/bits.h>
 #include "wq.h"
 #include "mlx5_core.h"

drivers/net/ethernet/mellanox/mlx5/core/en_dim.c

@@ -30,7 +30,7 @@
  * SOFTWARE.
  */
 
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 #include "en.h"
 
 static void