Merge branches 'acpi-pm' and 'acpi-x86'

Merge additional ACPI quirks for x86 systems:

 - Drop a suspend-to-idle quirk for HP Elitebook G9 that is not needed
   any more after a firmware update (Mario Limonciello).

 - Add all Cezanne systems to the list for forcing StorageD3Enable,
   because they all need the same quirk (Mario Limonciello).

* acpi-pm:
  ACPI: x86: Drop quirk for HP Elitebook

* acpi-x86:
  ACPI: x86: utils: Add Cezanne to the list for forcing StorageD3Enable

Author: rafaeljw

drivers/acpi/x86/s2idle.c

@@ -384,29 +384,6 @@ static const struct acpi_device_id amd_hid_ids[] = {
 	{}
 };
 
-static int lps0_prefer_amd(const struct dmi_system_id *id)
-{
-	pr_debug("Using AMD GUID w/ _REV 2.\n");
-	rev_id = 2;
-	return 0;
-}
-static const struct dmi_system_id s2idle_dmi_table[] __initconst = {
-	{
-		/*
-		 * AMD Rembrandt based HP EliteBook 835/845/865 G9
-		 * Contains specialized AML in AMD/_REV 2 path to avoid
-		 * triggering a bug in Qualcomm WLAN firmware. This may be
-		 * removed in the future if that firmware is fixed.
-		 */
-		.callback = lps0_prefer_amd,
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "HP"),
-			DMI_MATCH(DMI_BOARD_NAME, "8990"),
-		},
-	},
-	{}
-};
-
 static int lps0_device_attach(struct acpi_device *adev,
 			      const struct acpi_device_id *not_used)
 {
@@ -586,7 +563,6 @@ static const struct platform_s2idle_ops acpi_s2idle_ops_lps0 = {
 
 void __init acpi_s2idle_setup(void)
 {
-	dmi_check_system(s2idle_dmi_table);
 	acpi_scan_add_handler(&lps0_handler);
 	s2idle_set_ops(&acpi_s2idle_ops_lps0);
 }

drivers/acpi/x86/utils.c

@@ -200,39 +200,28 @@ bool acpi_device_override_status(struct acpi_device *adev, unsigned long long *s
  * a hardcoded allowlist for D3 support, which was used for these platforms.
  *
  * This allows quirking on Linux in a similar fashion.
+ *
+ * Cezanne systems shouldn't *normally* need this as the BIOS includes
+ * StorageD3Enable.  But for two reasons we have added it.
+ * 1) The BIOS on a number of Dell systems have ambiguity
+ *    between the same value used for _ADR on ACPI nodes GPP1.DEV0 and GPP1.NVME.
+ *    GPP1.NVME is needed to get StorageD3Enable node set properly.
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=216440
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=216773
+ *    https://bugzilla.kernel.org/show_bug.cgi?id=217003
+ * 2) On at least one HP system StorageD3Enable is missing on the second NVME
+      disk in the system.
  */
 static const struct x86_cpu_id storage_d3_cpu_ids[] = {
 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 96, NULL),	/* Renoir */
 	X86_MATCH_VENDOR_FAM_MODEL(AMD, 23, 104, NULL),	/* Lucienne */
-	{}
-};
-
-static const struct dmi_system_id force_storage_d3_dmi[] = {
-	{
-		/*
-		 * _ADR is ambiguous between GPP1.DEV0 and GPP1.NVME
-		 * but .NVME is needed to get StorageD3Enable node
-		 * https://bugzilla.kernel.org/show_bug.cgi?id=216440
-		 */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 14 7425 2-in-1"),
-		}
-	},
-	{
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 16 5625"),
-		}
-	},
+	X86_MATCH_VENDOR_FAM_MODEL(AMD, 25, 80, NULL),	/* Cezanne */
 	{}
 };
 
 bool force_storage_d3(void)
 {
-	const struct dmi_system_id *dmi_id = dmi_first_match(force_storage_d3_dmi);
-
-	return dmi_id || x86_match_cpu(storage_d3_cpu_ids);
+	return x86_match_cpu(storage_d3_cpu_ids);
 }
 
 /*