Merge branch 'sched/urgent' into sched/core, to pick up fixes before applying new changes

Signed-off-by: Ingo Molnar <[email protected]>

Author: Ingo Molnar

Documentation/devicetree/bindings/net/mediatek-net.txt

@@ -9,7 +9,8 @@ have dual GMAC each represented by a child node..
 Required properties:
 - compatible: Should be "mediatek,mt7623-eth"
 - reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
+- interrupts: Should contain the three frame engines interrupts in numeric
+	order. These are fe_int0, fe_int1 and fe_int2.
 - clocks: the clock used by the core
 - clock-names: the names of the clock listed in the clocks property. These are
 	"ethif", "esw", "gp2", "gp1"
@@ -42,7 +43,9 @@ eth: ethernet@1b100000 {
 		 <&ethsys CLK_ETHSYS_GP2>,
 		 <&ethsys CLK_ETHSYS_GP1>;
 	clock-names = "ethif", "esw", "gp2", "gp1";
-	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
+	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
+		      GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
+		      GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
 	resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
 	reset-names = "eth";

Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt

@@ -8,15 +8,19 @@ Required properties:
 	of memory mapped region.
 - clock-names: from common clock binding:
 	Required elements: "24m"
-- rockchip,grf: phandle to the syscon managing the "general register files"
 - #phy-cells : from the generic PHY bindings, must be 0;
 
 Example:
 
-edp_phy: edp-phy {
-	compatible = "rockchip,rk3288-dp-phy";
-	rockchip,grf = <&grf>;
-	clocks = <&cru SCLK_EDP_24M>;
-	clock-names = "24m";
-	#phy-cells = <0>;
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
+
+...
+
+	edp_phy: edp-phy {
+		compatible = "rockchip,rk3288-dp-phy";
+		clocks = <&cru SCLK_EDP_24M>;
+		clock-names = "24m";
+		#phy-cells = <0>;
+	};
 };

Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt

@@ -3,17 +3,23 @@ Rockchip EMMC PHY
 
 Required properties:
  - compatible: rockchip,rk3399-emmc-phy
- - rockchip,grf : phandle to the syscon managing the "general
-   register files"
  - #phy-cells: must be 0
- - reg: PHY configure reg address offset in "general
+ - reg: PHY register address offset and length in "general
    register files"
 
 Example:
 
-emmcphy: phy {
-	compatible = "rockchip,rk3399-emmc-phy";
-	rockchip,grf = <&grf>;
-	reg = <0xf780>;
-	#phy-cells = <0>;
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	emmcphy: phy@f780 {
+		compatible = "rockchip,rk3399-emmc-phy";
+		reg = <0xf780 0x20>;
+		#phy-cells = <0>;
+	};
 };

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

@@ -15,9 +15,10 @@ Required properties:
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
 - clocks: Must contain a list of phandle and clock specifier for the rtc
-          and source clocks.
-- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
-               same order as the clocks property.
+          clock and in the case of a s3c6410 compatible controller, also
+          a source clock.
+- clock-names: Must contain "rtc" and for a s3c6410 compatible controller,
+               a "rtc_src" sorted in the same order as the clocks property.
 
 Example:
 

Documentation/input/event-codes.txt

@@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings:
     proximity of the device and while the value of the BTN_TOUCH code is 0. If
     the input device may be used freely in three dimensions, consider ABS_Z
     instead.
+  - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
+    proximity and set to 0 when the tool leaves detectable proximity.
+    BTN_TOOL_<name> signals the type of tool that is currently detected by the
+    hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
 
 * ABS_MT_<name>:
   - Used to describe multitouch input events. Please see

Documentation/x86/x86_64/mm.txt

@@ -19,7 +19,7 @@ ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space
 ... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
-ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
+ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
 ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
 ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
 
@@ -31,8 +31,8 @@ vmalloc space is lazily synchronized into the different PML4 pages of
 the processes using the page fault handler, with init_level4_pgt as
 reference.
 
-Current X86-64 implementations only support 40 bits of address space,
-but we support up to 46 bits. This expands into MBZ space in the page tables.
+Current X86-64 implementations support up to 46 bits of address space (64 TB),
+which is our current limit. This expands into MBZ space in the page tables.
 
 We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
 memory window (this size is arbitrary, it can be raised later if needed).

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*
@@ -1008,7 +1008,8 @@ prepare0: archprepare FORCE
 prepare: prepare0 prepare-objtool
 
 ifdef CONFIG_STACK_VALIDATION
-  has_libelf := $(shell echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf - &> /dev/null && echo 1 || echo 0)
+  has_libelf := $(call try-run,\
+		echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf -,1,0)
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else

arch/arm/include/asm/cputype.h

@@ -276,7 +276,7 @@ static inline int __attribute_const__ cpuid_feature_extract_field(u32 features,
 	int feature = (features >> field) & 15;
 
 	/* feature registers are signed values */
-	if (feature > 8)
+	if (feature > 7)
 		feature -= 16;
 
 	return feature;

arch/arm/kernel/setup.c

@@ -512,7 +512,7 @@ static void __init elf_hwcap_fixup(void)
 	 */
 	if (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) > 1 ||
 	    (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) == 1 &&
-	     cpuid_feature_extract(CPUID_EXT_ISAR3, 20) >= 3))
+	     cpuid_feature_extract(CPUID_EXT_ISAR4, 20) >= 3))
 		elf_hwcap &= ~HWCAP_SWP;
 }
 

arch/arm/mm/dma-mapping.c

@@ -762,7 +762,8 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	if (!mask)
 		return NULL;
 
-	buf = kzalloc(sizeof(*buf), gfp);
+	buf = kzalloc(sizeof(*buf),
+		      gfp & ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM));
 	if (!buf)
 		return NULL;
 

arch/arm64/kernel/head.S

@@ -588,6 +588,15 @@ set_hcr:
 	msr	vpidr_el2, x0
 	msr	vmpidr_el2, x1
 
+	/*
+	 * When VHE is not in use, early init of EL2 and EL1 needs to be
+	 * done here.
+	 * When VHE _is_ in use, EL1 will not be used in the host and
+	 * requires no configuration, and all non-hyp-specific EL2 setup
+	 * will be done via the _EL1 system register aliases in __cpu_setup.
+	 */
+	cbnz	x2, 1f
+
 	/* sctlr_el1 */
 	mov	x0, #0x0800			// Set/clear RES{1,0} bits
 CPU_BE(	movk	x0, #0x33d0, lsl #16	)	// Set EE and E0E on BE systems
@@ -597,6 +606,7 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 	/* Coprocessor traps. */
 	mov	x0, #0x33ff
 	msr	cptr_el2, x0			// Disable copro. traps to EL2
+1:
 
 #ifdef CONFIG_COMPAT
 	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
@@ -734,7 +744,8 @@ ENDPROC(__secondary_switched)
 
 	.macro	update_early_cpu_boot_status status, tmp1, tmp2
 	mov	\tmp2, #\status
-	str_l	\tmp2, __early_cpu_boot_status, \tmp1
+	adr_l	\tmp1, __early_cpu_boot_status
+	str	\tmp2, [\tmp1]
 	dmb	sy
 	dc	ivac, \tmp1			// Invalidate potentially stale cache line
 	.endm

arch/arm64/kernel/smp_spin_table.c

@@ -52,6 +52,7 @@ static void write_pen_release(u64 val)
 static int smp_spin_table_cpu_init(unsigned int cpu)
 {
 	struct device_node *dn;
+	int ret;
 
 	dn = of_get_cpu_node(cpu, NULL);
 	if (!dn)
@@ -60,15 +61,15 @@ static int smp_spin_table_cpu_init(unsigned int cpu)
 	/*
 	 * Determine the address from which the CPU is polling.
 	 */
-	if (of_property_read_u64(dn, "cpu-release-addr",
-				 &cpu_release_addr[cpu])) {
+	ret = of_property_read_u64(dn, "cpu-release-addr",
+				   &cpu_release_addr[cpu]);
+	if (ret)
 		pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
 		       cpu);
 
-		return -1;
-	}
+	of_node_put(dn);
 
-	return 0;
+	return ret;
 }
 
 static int smp_spin_table_cpu_prepare(unsigned int cpu)

arch/powerpc/include/uapi/asm/cputable.h

@@ -31,6 +31,7 @@
 #define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
 					0x00000040
 
+/* Reserved - do not use		0x00000004 */
 #define PPC_FEATURE_TRUE_LE		0x00000002
 #define PPC_FEATURE_PPC_LE		0x00000001
 

arch/powerpc/kernel/prom.c

@@ -148,23 +148,25 @@ static struct ibm_pa_feature {
 	unsigned long	cpu_features;	/* CPU_FTR_xxx bit */
 	unsigned long	mmu_features;	/* MMU_FTR_xxx bit */
 	unsigned int	cpu_user_ftrs;	/* PPC_FEATURE_xxx bit */
+	unsigned int	cpu_user_ftrs2;	/* PPC_FEATURE2_xxx bit */
 	unsigned char	pabyte;		/* byte number in ibm,pa-features */
 	unsigned char	pabit;		/* bit number (big-endian) */
 	unsigned char	invert;		/* if 1, pa bit set => clear feature */
 } ibm_pa_features[] __initdata = {
-	{0, 0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
-	{0, 0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
-	{CPU_FTR_CTRL, 0, 0,		0, 3, 0},
-	{CPU_FTR_NOEXECUTE, 0, 0,	0, 6, 0},
-	{CPU_FTR_NODSISRALIGN, 0, 0,	1, 1, 1},
-	{0, MMU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
-	{CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
+	{0, 0, PPC_FEATURE_HAS_MMU, 0,		0, 0, 0},
+	{0, 0, PPC_FEATURE_HAS_FPU, 0,		0, 1, 0},
+	{CPU_FTR_CTRL, 0, 0, 0,			0, 3, 0},
+	{CPU_FTR_NOEXECUTE, 0, 0, 0,		0, 6, 0},
+	{CPU_FTR_NODSISRALIGN, 0, 0, 0,		1, 1, 1},
+	{0, MMU_FTR_CI_LARGE_PAGE, 0, 0,		1, 2, 0},
+	{CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 0, 5, 0, 0},
 	/*
-	 * If the kernel doesn't support TM (ie. CONFIG_PPC_TRANSACTIONAL_MEM=n),
-	 * we don't want to turn on CPU_FTR_TM here, so we use CPU_FTR_TM_COMP
-	 * which is 0 if the kernel doesn't support TM.
+	 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
+	 * we don't want to turn on TM here, so we use the *_COMP versions
+	 * which are 0 if the kernel doesn't support TM.
 	 */
-	{CPU_FTR_TM_COMP, 0, 0,		22, 0, 0},
+	{CPU_FTR_TM_COMP, 0, 0,
+	 PPC_FEATURE2_HTM_COMP|PPC_FEATURE2_HTM_NOSC_COMP, 22, 0, 0},
 };
 
 static void __init scan_features(unsigned long node, const unsigned char *ftrs,
@@ -195,10 +197,12 @@ static void __init scan_features(unsigned long node, const unsigned char *ftrs,
 		if (bit ^ fp->invert) {
 			cur_cpu_spec->cpu_features |= fp->cpu_features;
 			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+			cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
 			cur_cpu_spec->mmu_features |= fp->mmu_features;
 		} else {
 			cur_cpu_spec->cpu_features &= ~fp->cpu_features;
 			cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+			cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
 			cur_cpu_spec->mmu_features &= ~fp->mmu_features;
 		}
 	}

arch/s390/Kconfig

@@ -4,6 +4,9 @@ config MMU
 config ZONE_DMA
 	def_bool y
 
+config CPU_BIG_ENDIAN
+	def_bool y
+
 config LOCKDEP_SUPPORT
 	def_bool y
 

arch/s390/include/asm/pci.h

@@ -44,7 +44,8 @@ struct zpci_fmb {
 	u64 rpcit_ops;
 	u64 dma_rbytes;
 	u64 dma_wbytes;
-} __packed __aligned(64);
+	u64 pad[2];
+} __packed __aligned(128);
 
 enum zpci_state {
 	ZPCI_FN_STATE_RESERVED,

arch/s390/include/asm/seccomp.h

@@ -13,4 +13,6 @@
 #define __NR_seccomp_exit_32	__NR_exit
 #define __NR_seccomp_sigreturn_32 __NR_sigreturn
 
+#include <asm-generic/seccomp.h>
+
 #endif	/* _ASM_S390_SECCOMP_H */

arch/s390/lib/spinlock.c

@@ -105,6 +105,7 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags)
 			if (_raw_compare_and_swap(&lp->lock, 0, cpu))
 				return;
 			local_irq_restore(flags);
+			continue;
 		}
 		/* Check if the lock owner is running. */
 		if (first_diag && cpu_is_preempted(~owner)) {

arch/x86/crypto/sha-mb/sha1_mb.c

@@ -453,10 +453,10 @@ static int sha_complete_job(struct mcryptd_hash_request_ctx *rctx,
 
 			req = cast_mcryptd_ctx_to_req(req_ctx);
 			if (irqs_disabled())
-				rctx->complete(&req->base, ret);
+				req_ctx->complete(&req->base, ret);
 			else {
 				local_bh_disable();
-				rctx->complete(&req->base, ret);
+				req_ctx->complete(&req->base, ret);
 				local_bh_enable();
 			}
 		}

arch/x86/include/asm/hugetlb.h

@@ -4,6 +4,7 @@
 #include <asm/page.h>
 #include <asm-generic/hugetlb.h>
 
+#define hugepages_supported() cpu_has_pse
 
 static inline int is_hugepage_only_range(struct mm_struct *mm,
 					 unsigned long addr,

arch/x86/kernel/cpu/mshyperv.c

@@ -152,6 +152,11 @@ static struct clocksource hyperv_cs = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+static unsigned char hv_get_nmi_reason(void)
+{
+	return 0;
+}
+
 static void __init ms_hyperv_init_platform(void)
 {
 	/*
@@ -191,6 +196,13 @@ static void __init ms_hyperv_init_platform(void)
 	machine_ops.crash_shutdown = hv_machine_crash_shutdown;
 #endif
 	mark_tsc_unstable("running on Hyper-V");
+
+	/*
+	 * Generation 2 instances don't support reading the NMI status from
+	 * 0x61 port.
+	 */
+	if (efi_enabled(EFI_BOOT))
+		x86_platform.get_nmi_reason = hv_get_nmi_reason;
 }
 
 const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {