ixgbe: use new eth_get_headlen interface

Update ixgbe to drop the ixgbe_get_headlen function in favor of eth_get_headlen.

Signed-off-by: Alexander Duyck <[email protected]>
Acked-by: Jeff Kirsher <[email protected]>
Signed-off-by: David S. Miller <[email protected]>

Author: Alexander Duyck

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -1521,120 +1521,6 @@ void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count)
 		ixgbe_release_rx_desc(rx_ring, i);
 }
 
-/**
- * ixgbe_get_headlen - determine size of header for RSC/LRO/GRO/FCOE
- * @data: pointer to the start of the headers
- * @max_len: total length of section to find headers in
- *
- * This function is meant to determine the length of headers that will
- * be recognized by hardware for LRO, GRO, and RSC offloads.  The main
- * motivation of doing this is to only perform one pull for IPv4 TCP
- * packets so that we can do basic things like calculating the gso_size
- * based on the average data per packet.
- **/
-static unsigned int ixgbe_get_headlen(unsigned char *data,
-				      unsigned int max_len)
-{
-	union {
-		unsigned char *network;
-		/* l2 headers */
-		struct ethhdr *eth;
-		struct vlan_hdr *vlan;
-		/* l3 headers */
-		struct iphdr *ipv4;
-		struct ipv6hdr *ipv6;
-	} hdr;
-	__be16 protocol;
-	u8 nexthdr = 0;	/* default to not TCP */
-	u8 hlen;
-
-	/* this should never happen, but better safe than sorry */
-	if (max_len < ETH_HLEN)
-		return max_len;
-
-	/* initialize network frame pointer */
-	hdr.network = data;
-
-	/* set first protocol and move network header forward */
-	protocol = hdr.eth->h_proto;
-	hdr.network += ETH_HLEN;
-
-	/* handle any vlan tag if present */
-	if (protocol == htons(ETH_P_8021Q)) {
-		if ((hdr.network - data) > (max_len - VLAN_HLEN))
-			return max_len;
-
-		protocol = hdr.vlan->h_vlan_encapsulated_proto;
-		hdr.network += VLAN_HLEN;
-	}
-
-	/* handle L3 protocols */
-	if (protocol == htons(ETH_P_IP)) {
-		if ((hdr.network - data) > (max_len - sizeof(struct iphdr)))
-			return max_len;
-
-		/* access ihl as a u8 to avoid unaligned access on ia64 */
-		hlen = (hdr.network[0] & 0x0F) << 2;
-
-		/* verify hlen meets minimum size requirements */
-		if (hlen < sizeof(struct iphdr))
-			return hdr.network - data;
-
-		/* record next protocol if header is present */
-		if (!(hdr.ipv4->frag_off & htons(IP_OFFSET)))
-			nexthdr = hdr.ipv4->protocol;
-	} else if (protocol == htons(ETH_P_IPV6)) {
-		if ((hdr.network - data) > (max_len - sizeof(struct ipv6hdr)))
-			return max_len;
-
-		/* record next protocol */
-		nexthdr = hdr.ipv6->nexthdr;
-		hlen = sizeof(struct ipv6hdr);
-#ifdef IXGBE_FCOE
-	} else if (protocol == htons(ETH_P_FCOE)) {
-		if ((hdr.network - data) > (max_len - FCOE_HEADER_LEN))
-			return max_len;
-		hlen = FCOE_HEADER_LEN;
-#endif
-	} else {
-		return hdr.network - data;
-	}
-
-	/* relocate pointer to start of L4 header */
-	hdr.network += hlen;
-
-	/* finally sort out TCP/UDP */
-	if (nexthdr == IPPROTO_TCP) {
-		if ((hdr.network - data) > (max_len - sizeof(struct tcphdr)))
-			return max_len;
-
-		/* access doff as a u8 to avoid unaligned access on ia64 */
-		hlen = (hdr.network[12] & 0xF0) >> 2;
-
-		/* verify hlen meets minimum size requirements */
-		if (hlen < sizeof(struct tcphdr))
-			return hdr.network - data;
-
-		hdr.network += hlen;
-	} else if (nexthdr == IPPROTO_UDP) {
-		if ((hdr.network - data) > (max_len - sizeof(struct udphdr)))
-			return max_len;
-
-		hdr.network += sizeof(struct udphdr);
-	}
-
-	/*
-	 * If everything has gone correctly hdr.network should be the
-	 * data section of the packet and will be the end of the header.
-	 * If not then it probably represents the end of the last recognized
-	 * header.
-	 */
-	if ((hdr.network - data) < max_len)
-		return hdr.network - data;
-	else
-		return max_len;
-}
-
 static void ixgbe_set_rsc_gso_size(struct ixgbe_ring *ring,
 				   struct sk_buff *skb)
 {
@@ -1793,7 +1679,7 @@ static void ixgbe_pull_tail(struct ixgbe_ring *rx_ring,
 	 * we need the header to contain the greater of either ETH_HLEN or
 	 * 60 bytes if the skb->len is less than 60 for skb_pad.
 	 */
-	pull_len = ixgbe_get_headlen(va, IXGBE_RX_HDR_SIZE);
+	pull_len = eth_get_headlen(va, IXGBE_RX_HDR_SIZE);
 
 	/* align pull length to size of long to optimize memcpy performance */
 	skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long)));