Merge tag 'irqchip-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core

Pull irqchip updates for Linux 5.4 from Marc Zyngier:

 - Large GICv3 updates to support new PPI and SPI ranges
 - Conver all alloc_fwnode() users to use PAs instead of VAs
 - Add support for Marvell's MMP3 irqchip
 - Add support for Amlogic Meson SM1
 - Various cleanups and fixes

Author: KAGA-KOKO

Documentation/arm64/silicon-errata.rst

@@ -115,6 +115,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip0{6,7}       | #161010701      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip0{6,7}       | #161010803      | N/A                         |
++----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip07           | #161600802      | HISILICON_ERRATUM_161600802 |
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |

Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt

@@ -16,6 +16,7 @@ Required properties:
     "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
     "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
+    "amlogic,meson-sm1-gpio-intc" for SM1 SoCs (S905D3, S905X3, S905Y3)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an

Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml

@@ -44,11 +44,13 @@ properties:
       be at least 4.
 
       The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI
-      interrupts. Other values are reserved for future use.
+      interrupts, 2 for interrupts in the Extended SPI range, 3 for the
+      Extended PPI range. Other values are reserved for future use.
 
       The 2nd cell contains the interrupt number for the interrupt type.
       SPI interrupts are in the range [0-987]. PPI interrupts are in the
-      range [0-15].
+      range [0-15]. Extented SPI interrupts are in the range [0-1023].
+      Extended PPI interrupts are in the range [0-127].
 
       The 3rd cell is the flags, encoded as follows:
       bits[3:0] trigger type and level flags.

arch/arm/mach-mmp/regs-icu.h

@@ -11,6 +11,9 @@
 #define ICU_VIRT_BASE	(AXI_VIRT_BASE + 0x82000)
 #define ICU_REG(x)	(ICU_VIRT_BASE + (x))
 
+#define ICU2_VIRT_BASE	(AXI_VIRT_BASE + 0x84000)
+#define ICU2_REG(x)	(ICU2_VIRT_BASE + (x))
+
 #define ICU_INT_CONF(n)		ICU_REG((n) << 2)
 #define ICU_INT_CONF_MASK	(0xf)
 

drivers/gpio/gpio-ixp4xx.c

@@ -400,7 +400,7 @@ static int ixp4xx_gpio_probe(struct platform_device *pdev)
 		g->fwnode = of_node_to_fwnode(np);
 	} else {
 		parent = ixp4xx_get_irq_domain();
-		g->fwnode = irq_domain_alloc_fwnode(g->base);
+		g->fwnode = irq_domain_alloc_fwnode(&res->start);
 		if (!g->fwnode) {
 			dev_err(dev, "no domain base\n");
 			return -ENODEV;

drivers/irqchip/irq-gic-common.c

@@ -41,6 +41,8 @@ void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data)
 {
 	for (; quirks->desc; quirks++) {
+		if (quirks->compatible)
+			continue;
 		if (quirks->iidr != (quirks->mask & iidr))
 			continue;
 		if (quirks->init(data))
@@ -63,7 +65,7 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
 	 * for "irq", depending on "type".
 	 */
 	raw_spin_lock_irqsave(&irq_controller_lock, flags);
-	val = oldval = readl_relaxed(base + GIC_DIST_CONFIG + confoff);
+	val = oldval = readl_relaxed(base + confoff);
 	if (type & IRQ_TYPE_LEVEL_MASK)
 		val &= ~confmask;
 	else if (type & IRQ_TYPE_EDGE_BOTH)
@@ -83,14 +85,10 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
 	 * does not allow us to set the configuration or we are in a
 	 * non-secure mode, and hence it may not be catastrophic.
 	 */
-	writel_relaxed(val, base + GIC_DIST_CONFIG + confoff);
-	if (readl_relaxed(base + GIC_DIST_CONFIG + confoff) != val) {
-		if (WARN_ON(irq >= 32))
-			ret = -EINVAL;
-		else
-			pr_warn("GIC: PPI%d is secure or misconfigured\n",
-				irq - 16);
-	}
+	writel_relaxed(val, base + confoff);
+	if (readl_relaxed(base + confoff) != val)
+		ret = -EINVAL;
+
 	raw_spin_unlock_irqrestore(&irq_controller_lock, flags);
 
 	if (sync_access)
@@ -132,26 +130,31 @@ void gic_dist_config(void __iomem *base, int gic_irqs,
 		sync_access();
 }
 
-void gic_cpu_config(void __iomem *base, void (*sync_access)(void))
+void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void))
 {
 	int i;
 
 	/*
 	 * Deal with the banked PPI and SGI interrupts - disable all
-	 * PPI interrupts, ensure all SGI interrupts are enabled.
-	 * Make sure everything is deactivated.
+	 * private interrupts. Make sure everything is deactivated.
 	 */
-	writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR);
-	writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR);
-	writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
+	for (i = 0; i < nr; i += 32) {
+		writel_relaxed(GICD_INT_EN_CLR_X32,
+			       base + GIC_DIST_ACTIVE_CLEAR + i / 8);
+		writel_relaxed(GICD_INT_EN_CLR_X32,
+			       base + GIC_DIST_ENABLE_CLEAR + i / 8);
+	}
 
 	/*
 	 * Set priority on PPI and SGI interrupts
 	 */
-	for (i = 0; i < 32; i += 4)
+	for (i = 0; i < nr; i += 4)
 		writel_relaxed(GICD_INT_DEF_PRI_X4,
 					base + GIC_DIST_PRI + i * 4 / 4);
 
+	/* Ensure all SGI interrupts are now enabled */
+	writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);
+
 	if (sync_access)
 		sync_access();
 }

drivers/irqchip/irq-gic-common.h

@@ -22,7 +22,7 @@ int gic_configure_irq(unsigned int irq, unsigned int type,
                        void __iomem *base, void (*sync_access)(void));
 void gic_dist_config(void __iomem *base, int gic_irqs,
 		     void (*sync_access)(void));
-void gic_cpu_config(void __iomem *base, void (*sync_access)(void));
+void gic_cpu_config(void __iomem *base, int nr, void (*sync_access)(void));
 void gic_enable_quirks(u32 iidr, const struct gic_quirk *quirks,
 		void *data);
 void gic_enable_of_quirks(const struct device_node *np,

drivers/irqchip/irq-gic-v2m.c

@@ -525,7 +525,7 @@ acpi_parse_madt_msi(union acpi_subtable_headers *header,
 			spi_start, nr_spis);
 	}
 
-	fwnode = irq_domain_alloc_fwnode((void *)m->base_address);
+	fwnode = irq_domain_alloc_fwnode(&res.start);
 	if (!fwnode) {
 		pr_err("Unable to allocate GICv2m domain token\n");
 		return -EINVAL;

drivers/irqchip/irq-gic-v3-its.c

@@ -2464,14 +2464,14 @@ static int its_alloc_device_irq(struct its_device *dev, int nvecs, irq_hw_number
 {
 	int idx;
 
+	/* Find a free LPI region in lpi_map and allocate them. */
 	idx = bitmap_find_free_region(dev->event_map.lpi_map,
 				      dev->event_map.nr_lpis,
 				      get_count_order(nvecs));
 	if (idx < 0)
 		return -ENOSPC;
 
 	*hwirq = dev->event_map.lpi_base + idx;
-	set_bit(idx, dev->event_map.lpi_map);
 
 	return 0;
 }
@@ -2641,14 +2641,13 @@ static void its_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 	struct its_node *its = its_dev->its;
 	int i;
 
+	bitmap_release_region(its_dev->event_map.lpi_map,
+			      its_get_event_id(irq_domain_get_irq_data(domain, virq)),
+			      get_count_order(nr_irqs));
+
 	for (i = 0; i < nr_irqs; i++) {
 		struct irq_data *data = irq_domain_get_irq_data(domain,
 								virq + i);
-		u32 event = its_get_event_id(data);
-
-		/* Mark interrupt index as unused */
-		clear_bit(event, its_dev->event_map.lpi_map);
-
 		/* Nuke the entry in the domain */
 		irq_domain_reset_irq_data(data);
 	}
@@ -3921,7 +3920,7 @@ static int __init gic_acpi_parse_madt_its(union acpi_subtable_headers *header,
 	res.end = its_entry->base_address + ACPI_GICV3_ITS_MEM_SIZE - 1;
 	res.flags = IORESOURCE_MEM;
 
-	dom_handle = irq_domain_alloc_fwnode((void *)its_entry->base_address);
+	dom_handle = irq_domain_alloc_fwnode(&res.start);
 	if (!dom_handle) {
 		pr_err("ITS@%pa: Unable to allocate GICv3 ITS domain token\n",
 		       &res.start);