-
Notifications
You must be signed in to change notification settings - Fork 79
Commit a26fdf3
usb: storage: Ignore UAS driver for SanDisk 3.2 Gen2 storage device
commit a541acceedf4f639f928f41fbb676b75946dc295 upstream.
SanDisk 3.2 Gen2 storage device(0781:55e8) doesn't work well with UAS.
Log says,
[ 6.507865][ 3] [ T159] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 6.540314][ 3] [ T159] usb 2-1.4: New USB device found, idVendor=0781, idProduct=55e8, bcdDevice= 0.01
[ 6.576304][ 3] [ T159] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.584727][ 3] [ T159] usb 2-1.4: Product: SanDisk 3.2 Gen2
[ 6.590459][ 3] [ T159] usb 2-1.4: Manufacturer: SanDisk
[ 6.595845][ 3] [ T159] usb 2-1.4: SerialNumber: 03021707022525140940
[ 7.230852][ 0] [ T265] usbcore: registered new interface driver usb-storage
[ 7.251247][ 0] [ T265] scsi host3: uas
[ 7.255280][ 0] [ T265] usbcore: registered new interface driver uas
[ 7.270498][ 1] [ T192] scsi 3:0:0:0: Direct-Access SanDisk Extreme Pro DDE1 0110 PQ: 0 ANSI: 6
[ 7.299588][ 3] [ T192] scsi 3:0:0:1: Enclosure SanDisk SES Device 0110 PQ: 0 ANSI: 6
[ 7.321681][ 3] [ T192] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 7.328185][ 3] [ T192] scsi 3:0:0:1: Attached scsi generic sg2 type 13
[ 7.328804][ 0] [ T191] sd 3:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 7.343486][ 0] [ T191] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 7.364611][ 0] [ T191] sd 3:0:0:0: [sda] Write Protect is off
[ 7.370524][ 0] [ T191] sd 3:0:0:0: [sda] Mode Sense: 3d 00 10 00
[ 7.390655][ 0] [ T191] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 7.401363][ 0] [ T191] sd 3:0:0:0: [sda] Optimal transfer size 1048576 bytes
[ 7.436010][ 0] [ T191] sda: sda1
[ 7.450850][ 0] [ T191] sd 3:0:0:0: [sda] Attached SCSI disk
[ 7.470218][ 4] [ T262] scsi 3:0:0:1: Failed to get diagnostic page 0x1
[ 7.474869][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 data cmplt err -75 uas-tag 2 inflight: CMD
[ 7.476911][ 4] [ T262] scsi 3:0:0:1: Failed to bind enclosure -19
[ 7.485330][ 0] [ C0] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00
[ 7.491593][ 4] [ T262] ses 3:0:0:1: Attached Enclosure device
[ 38.066980][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD IN
[ 38.076012][ 4] [ T192] sd 3:0:0:0: [sda] tag#4 CDB: Read(10) 28 00 00 00 01 08 00 00 f8 00
[ 38.086485][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 38.095515][ 4] [ T192] sd 3:0:0:0: [sda] tag#3 CDB: Read(10) 28 00 00 00 00 10 00 00 08 00
[ 38.104122][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD IN
[ 38.113152][ 4] [ T192] sd 3:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 00 00 00 88 00 00 78 00
[ 38.121761][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
[ 38.130791][ 4] [ T192] sd 3:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 00 00 00 48 00 00 30 00
[ 38.139401][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD
[ 38.148170][ 4] [ T192] sd 3:0:0:0: [sda] tag#0 CDB: Read(10) 28 00 00 00 00 28 00 00 10 00
[ 38.178980][ 2] [ T304] scsi host3: uas_eh_device_reset_handler start
[ 38.901540][ 2] [ T304] usb 2-1.4: reset SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[ 38.936791][ 2] [ T304] scsi host3: uas_eh_device_reset_handler success
Device decriptor is below,
Bus 002 Device 006: ID 0781:55e8 SanDisk Corp. SanDisk 3.2 Gen2
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.20
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x0781 SanDisk Corp.
idProduct 0x55e8
bcdDevice 0.01
iManufacturer 1 SanDisk
iProduct 2 SanDisk 3.2 Gen2
iSerial 3 03021707022525140940
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x0079
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 896mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 32
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 0x002a
bNumDeviceCaps 3
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x0000f41e
BESL Link Power Management (LPM) Supported
BESL value 1024 us
Deep BESL value 61440 us
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
SuperSpeedPlus USB Device Capability:
bLength 20
bDescriptorType 16
bDevCapabilityType 10
bmAttributes 0x00000001
Sublink Speed Attribute count 1
Sublink Speed ID count 0
wFunctionalitySupport 0x1100
bmSublinkSpeedAttr[0] 0x000a4030
Speed Attribute ID: 0 10Gb/s Symmetric RX SuperSpeedPlus
bmSublinkSpeedAttr[1] 0x000a40b0
Speed Attribute ID: 0 10Gb/s Symmetric TX SuperSpeedPlus
Device Status: 0x0000
(Bus Powered)
So ignore UAS driver for this device.
Signed-off-by: Hongyu Xie <[email protected]>
Cc: stable <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
(cherry picked from commit 393ad978388ee83911eaef389dcc4e1183bef7bf)
Signed-off-by: Jack Vogel <[email protected]>1 parent 2ec8903 commit a26fdf3Copy full SHA for a26fdf3
File tree
Expand file treeCollapse file tree
1 file changed
+7
-0
lines changedFilter options
- drivers/usb/storage
Expand file treeCollapse file tree
1 file changed
+7
-0
lines changeddrivers/usb/storage/unusual_uas.h
Copy file name to clipboardExpand all lines: drivers/usb/storage/unusual_uas.h+7Lines changed: 7 additions & 0 deletions
Original file line number | Diff line number | Diff line change | |
---|---|---|---|
| |||
52 | 52 |
| |
53 | 53 |
| |
54 | 54 |
| |
| 55 | + | |
| 56 | + | |
| 57 | + | |
| 58 | + | |
| 59 | + | |
| 60 | + | |
| 61 | + | |
55 | 62 |
| |
56 | 63 |
| |
57 | 64 |
| |
|
0 commit comments