Merge tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

Pull spi updates from Mark Brown:
 "Another quiet release for SPI, almost entirely driver specific changes
  with the diffstat dominated by two new drivers which are about two
  thirds of it in terms of lines of code:

   - new drivers for PIC32 standard and SQI controllers
   - the Cadence driver has had runtime PM support added and quite a few
     fixes and cleanups
   - flash-specific accelerated path support now has a feature query
     interface
   - the pxa2xx driver has been moved to use the core DMA mapping support"

* tag 'spi-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (48 commits)
  spi: pic32-sqi: Fix linker error, undefined reference to `bad_dma_ops'
  spi: dw-pci: Spelling s/paltforms/platforms/g
  spi: pic32-sqi: Remove pic32_sqi_setup and pic32_sqi_cleanup
  spi: Fix simple typo s/impelment/implement
  spi: rockchip: potential NULL dereference on error
  spi: zynqmp: disable clocks in error paths
  spi: Drop unnecessary dependencies on relaxed I/O accessors
  spi: qup: Add spi_master_put in remove function
  spi: qup: Handle clocks in pm_runtime suspend and resume
  spi: st-ssc4: Fix missing spi_master_put in spi_st_probe error paths
  spi: st-ssc4: Allow compile test build
  spi: omap2-mcspi: Use dma_request_chan() for requesting DMA channel
  spi: davinci: Use dma_request_chan() for requesting DMA channel
  spi: pic32: Fix checking return value of devm_ioremap_resource
  spi: spi-fsl-dspi: Update DT binding documentation
  spi: Drop duplicate code to set master->dev.parent
  spi: pic32: Set proper bits_per_word_mask
  spi: return error if kmap'd buffers passed to spi_map_buf()
  spi: core: add hook flash_read_supported to spi_master
  spi: pic32-sqi: silence array overflow warning
  ...

Author: torvalds

Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt

@@ -0,0 +1,34 @@
+Microchip PIC32 SPI Master controller
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-spi".
+- reg: Address and length of register space for the device.
+- interrupts: Should contain all three spi interrupts in sequence
+              of <fault-irq>, <receive-irq>, <transmit-irq>.
+- interrupt-names: Should be "fault", "rx", "tx" in order.
+- clocks: Phandle of the clock generating SPI clock on the bus.
+- clock-names: Should be "mck0".
+- cs-gpios: Specifies the gpio pins to be used for chipselects.
+            See: Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+- dmas: Two or more DMA channel specifiers following the convention outlined
+        in Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: Names for the dma channels. There must be at least one channel
+             named "spi-tx" for transmit and named "spi-rx" for receive.
+
+Example:
+
+spi1: spi@1f821000 {
+        compatible = "microchip,pic32mzda-spi";
+        reg = <0x1f821000 0x200>;
+        interrupts = <109 IRQ_TYPE_LEVEL_HIGH>,
+                     <110 IRQ_TYPE_LEVEL_HIGH>,
+                     <111 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "fault", "rx", "tx";
+        clocks = <&PBCLK2>;
+        clock-names = "mck0";
+        cs-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+        dmas = <&dma 134>, <&dma 135>;
+        dma-names = "spi-rx", "spi-tx";
+};

Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt

@@ -16,8 +16,7 @@ Required properties:
 
 Optional property:
 - big-endian: If present the dspi device's registers are implemented
-  in big endian mode, otherwise in native mode(same with CPU), for more
-  detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
+  in big endian mode.
 
 Optional SPI slave node properties:
 - fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip

Documentation/devicetree/bindings/spi/sqi-pic32.txt

@@ -0,0 +1,18 @@
+Microchip PIC32 Quad SPI controller
+-----------------------------------
+Required properties:
+- compatible: Should be "microchip,pic32mzda-sqi".
+- reg: Address and length of SQI controller register space.
+- interrupts: Should contain SQI interrupt.
+- clocks: Should contain phandle of two clocks in sequence, one that drives
+          clock on SPI bus and other that drives SQI controller.
+- clock-names: Should be "spi_ck" and "reg_ck" in order.
+
+Example:
+	sqi1: spi@1f8e2000 {
+		compatible = "microchip,pic32mzda-sqi";
+		reg = <0x1f8e2000 0x200>;
+		clocks = <&rootclk REF2CLK>, <&rootclk PB5CLK>;
+		clock-names = "spi_ck", "reg_ck";
+		interrupts = <169 IRQ_TYPE_LEVEL_HIGH>;
+	};

drivers/spi/Kconfig

@@ -410,7 +410,6 @@ config SPI_OMAP_UWIRE
 config SPI_OMAP24XX
 	tristate "McSPI driver for OMAP"
 	depends on HAS_DMA
-	depends on ARM || ARM64 || AVR32 || HEXAGON || MIPS || SUPERH
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	help
 	  SPI master controller for OMAP24XX and later Multichannel SPI
@@ -432,10 +431,23 @@ config SPI_OMAP_100K
 
 config SPI_ORION
 	tristate "Orion SPI master"
-	depends on PLAT_ORION || COMPILE_TEST
+	depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST
 	help
 	  This enables using the SPI master controller on the Orion chips.
 
+config SPI_PIC32
+	tristate "Microchip PIC32 series SPI"
+	depends on MACH_PIC32 || COMPILE_TEST
+	help
+	  SPI driver for Microchip PIC32 SPI master controller.
+
+config SPI_PIC32_SQI
+	tristate "Microchip PIC32 Quad SPI driver"
+	depends on MACH_PIC32 || COMPILE_TEST
+	depends on HAS_DMA
+	help
+	  SPI driver for PIC32 Quad SPI controller.
+
 config SPI_PL022
 	tristate "ARM AMBA PL022 SSP controller"
 	depends on ARM_AMBA
@@ -469,7 +481,6 @@ config SPI_PXA2XX_PCI
 
 config SPI_ROCKCHIP
 	tristate "Rockchip SPI controller driver"
-	depends on ARM || ARM64 || AVR32 || HEXAGON || MIPS || SUPERH
 	help
 	  This selects a driver for Rockchip SPI controller.
 
@@ -569,7 +580,7 @@ config SPI_SIRF
 
 config SPI_ST_SSC4
 	tristate "STMicroelectronics SPI SSC-based driver"
-	depends on ARCH_STI
+	depends on ARCH_STI || COMPILE_TEST
 	help
 	  STMicroelectronics SoCs support for SPI. If you say yes to
 	  this option, support will be included for the SSC driven SPI.
@@ -656,7 +667,7 @@ config SPI_XILINX
 
 config SPI_XLP
 	tristate "Netlogic XLP SPI controller driver"
-	depends on CPU_XLP || COMPILE_TEST
+	depends on CPU_XLP || ARCH_VULCAN || COMPILE_TEST
 	help
 	  Enable support for the SPI controller on the Netlogic XLP SoCs.
 	  Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, XLP9XX

drivers/spi/Makefile

@@ -62,6 +62,8 @@ obj-$(CONFIG_SPI_OMAP_100K)		+= spi-omap-100k.o
 obj-$(CONFIG_SPI_OMAP24XX)		+= spi-omap2-mcspi.o
 obj-$(CONFIG_SPI_TI_QSPI)		+= spi-ti-qspi.o
 obj-$(CONFIG_SPI_ORION)			+= spi-orion.o
+obj-$(CONFIG_SPI_PIC32)			+= spi-pic32.o
+obj-$(CONFIG_SPI_PIC32_SQI)		+= spi-pic32-sqi.o
 obj-$(CONFIG_SPI_PL022)			+= spi-pl022.o
 obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.o
 spi-pxa2xx-platform-objs		:= spi-pxa2xx.o spi-pxa2xx-dma.o

drivers/spi/spi-axi-spi-engine.c

@@ -525,7 +525,6 @@ static int spi_engine_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_ref_clk_disable;
 
-	master->dev.parent = &pdev->dev;
 	master->dev.of_node = pdev->dev.of_node;
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_3WIRE;
 	master->bits_per_word_mask = SPI_BPW_MASK(8);

drivers/spi/spi-bcm53xx.c

@@ -10,15 +10,18 @@
 #include "spi-bcm53xx.h"
 
 #define BCM53XXSPI_MAX_SPI_BAUD	13500000	/* 216 MHz? */
+#define BCM53XXSPI_FLASH_WINDOW	SZ_32M
 
 /* The longest observed required wait was 19 ms */
 #define BCM53XXSPI_SPE_TIMEOUT_MS	80
 
 struct bcm53xxspi {
 	struct bcma_device *core;
 	struct spi_master *master;
+	void __iomem *mmio_base;
 
 	size_t read_offset;
+	bool bspi;				/* Boot SPI mode with memory mapping */
 };
 
 static inline u32 bcm53xxspi_read(struct bcm53xxspi *b53spi, u16 offset)
@@ -32,6 +35,50 @@ static inline void bcm53xxspi_write(struct bcm53xxspi *b53spi, u16 offset,
 	bcma_write32(b53spi->core, offset, value);
 }
 
+static void bcm53xxspi_disable_bspi(struct bcm53xxspi *b53spi)
+{
+	struct device *dev = &b53spi->core->dev;
+	unsigned long deadline;
+	u32 tmp;
+
+	if (!b53spi->bspi)
+		return;
+
+	tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL);
+	if (tmp & 0x1)
+		return;
+
+	deadline = jiffies + usecs_to_jiffies(200);
+	do {
+		tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_BUSY_STATUS);
+		if (!(tmp & 0x1)) {
+			bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL,
+					 0x1);
+			ndelay(200);
+			b53spi->bspi = false;
+			return;
+		}
+		udelay(1);
+	} while (!time_after_eq(jiffies, deadline));
+
+	dev_warn(dev, "Timeout disabling BSPI\n");
+}
+
+static void bcm53xxspi_enable_bspi(struct bcm53xxspi *b53spi)
+{
+	u32 tmp;
+
+	if (b53spi->bspi)
+		return;
+
+	tmp = bcm53xxspi_read(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL);
+	if (!(tmp & 0x1))
+		return;
+
+	bcm53xxspi_write(b53spi, B53SPI_BSPI_MAST_N_BOOT_CTRL, 0x0);
+	b53spi->bspi = true;
+}
+
 static inline unsigned int bcm53xxspi_calc_timeout(size_t len)
 {
 	/* Do some magic calculation based on length and buad. Add 10% and 1. */
@@ -176,6 +223,8 @@ static int bcm53xxspi_transfer_one(struct spi_master *master,
 	u8 *buf;
 	size_t left;
 
+	bcm53xxspi_disable_bspi(b53spi);
+
 	if (t->tx_buf) {
 		buf = (u8 *)t->tx_buf;
 		left = t->len;
@@ -206,6 +255,22 @@ static int bcm53xxspi_transfer_one(struct spi_master *master,
 	return 0;
 }
 
+static int bcm53xxspi_flash_read(struct spi_device *spi,
+				 struct spi_flash_read_message *msg)
+{
+	struct bcm53xxspi *b53spi = spi_master_get_devdata(spi->master);
+	int ret = 0;
+
+	if (msg->from + msg->len > BCM53XXSPI_FLASH_WINDOW)
+		return -EINVAL;
+
+	bcm53xxspi_enable_bspi(b53spi);
+	memcpy_fromio(msg->buf, b53spi->mmio_base + msg->from, msg->len);
+	msg->retlen = msg->len;
+
+	return ret;
+}
+
 /**************************************************
  * BCMA
  **************************************************/
@@ -222,6 +287,7 @@ MODULE_DEVICE_TABLE(bcma, bcm53xxspi_bcma_tbl);
 
 static int bcm53xxspi_bcma_probe(struct bcma_device *core)
 {
+	struct device *dev = &core->dev;
 	struct bcm53xxspi *b53spi;
 	struct spi_master *master;
 	int err;
@@ -231,19 +297,27 @@ static int bcm53xxspi_bcma_probe(struct bcma_device *core)
 		return -ENOTSUPP;
 	}
 
-	master = spi_alloc_master(&core->dev, sizeof(*b53spi));
+	master = spi_alloc_master(dev, sizeof(*b53spi));
 	if (!master)
 		return -ENOMEM;
 
 	b53spi = spi_master_get_devdata(master);
 	b53spi->master = master;
 	b53spi->core = core;
 
+	if (core->addr_s[0])
+		b53spi->mmio_base = devm_ioremap(dev, core->addr_s[0],
+						 BCM53XXSPI_FLASH_WINDOW);
+	b53spi->bspi = true;
+	bcm53xxspi_disable_bspi(b53spi);
+
 	master->transfer_one = bcm53xxspi_transfer_one;
+	if (b53spi->mmio_base)
+		master->spi_flash_read = bcm53xxspi_flash_read;
 
 	bcma_set_drvdata(core, b53spi);
 
-	err = devm_spi_register_master(&core->dev, master);
+	err = devm_spi_register_master(dev, master);
 	if (err) {
 		spi_master_put(master);
 		bcma_set_drvdata(core, NULL);