HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub report

Commit b0f847e ("HID: hid-sensor-hub: Force logical minimum to 1 for
power and report state") not only replaced the descriptor fixup done for
devices with the HID_SENSOR_HUB_ENUM_QUIRK with a generic fix, but also
accidentally removed the unrelated descriptor fixup for the Lenovo ThinkPad
Helix 2 sensor hub. This commit restores this fixup.

Restoring this fixup not only fixes the Lenovo ThinkPad Helix 2's sensors,
but also the Lenovo ThinkPad 8's sensors.

Fixes: b0f847e ("HID: hid-sensor-hub: Force logical minimum ...")
Cc: Srinivas Pandruvada <[email protected]>
Cc: Fernando D S Lima <[email protected]>
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

Author: jwrdegoede

drivers/hid/hid-sensor-hub.c

@@ -579,6 +579,28 @@ void sensor_hub_device_close(struct hid_sensor_hub_device *hsdev)
 }
 EXPORT_SYMBOL_GPL(sensor_hub_device_close);
 
+static __u8 *sensor_hub_report_fixup(struct hid_device *hdev, __u8 *rdesc,
+		unsigned int *rsize)
+{
+	/*
+	 * Checks if the report descriptor of Thinkpad Helix 2 has a logical
+	 * minimum for magnetic flux axis greater than the maximum.
+	 */
+	if (hdev->product == USB_DEVICE_ID_TEXAS_INSTRUMENTS_LENOVO_YOGA &&
+		*rsize == 2558 && rdesc[913] == 0x17 && rdesc[914] == 0x40 &&
+		rdesc[915] == 0x81 && rdesc[916] == 0x08 &&
+		rdesc[917] == 0x00 && rdesc[918] == 0x27 &&
+		rdesc[921] == 0x07 && rdesc[922] == 0x00) {
+		/* Sets negative logical minimum for mag x, y and z */
+		rdesc[914] = rdesc[935] = rdesc[956] = 0xc0;
+		rdesc[915] = rdesc[936] = rdesc[957] = 0x7e;
+		rdesc[916] = rdesc[937] = rdesc[958] = 0xf7;
+		rdesc[917] = rdesc[938] = rdesc[959] = 0xff;
+	}
+
+	return rdesc;
+}
+
 static int sensor_hub_probe(struct hid_device *hdev,
 				const struct hid_device_id *id)
 {
@@ -743,6 +765,7 @@ static struct hid_driver sensor_hub_driver = {
 	.probe = sensor_hub_probe,
 	.remove = sensor_hub_remove,
 	.raw_event = sensor_hub_raw_event,
+	.report_fixup = sensor_hub_report_fixup,
 #ifdef CONFIG_PM
 	.suspend = sensor_hub_suspend,
 	.resume = sensor_hub_resume,