Skip to content

Commit c0949b2

Browse files
takaswietiwai
takaswie
authored and
tiwai
committed
ALSA: firewire-tascam: add skeleton for TASCAM FireWire series
This commit adds a new driver for TASCAM FireWire series. In this commit, this driver just creates/removes card instance according to bus event. More functionalities will be added in following commits. TASCAM FireWire series consists of: * PDI 1394P23 for IEEE 1394 PHY layer * PDI 1394L40 for IEEE 1394 LINK layer and IEC 61883 interface * XILINX XC9536XL * XILINX Spartan-II XC2S100 * ATMEL AT91M42800A Ilya Zimnovich had investigated TASCAM FireWire series in 2011, and discover some features of his FW-1804. You can see a part of his research in FFADO project. http://subversion.ffado.org/wiki/Tascam A part of my work are based on Ilya's investigation, while this series doesn't support the FW-1804, because of a lack of config ROM information and its protocol detail, especially for PCM channels. I observed that FW-1884 and FW-1082 don't work properly with 1394 OHCI controller based on VT6315. The controller can actually communicate packets to these models, while these models generate no sounds. It may be due to the PHY/LINK layer issues. Using 1394 OHCI controller produced by the other vendors such as Texas Instruments may work. Or adding another node on the bus. Signed-off-by: Takashi Sakamoto <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
1 parent 44b7308 commit c0949b2

File tree

5 files changed

+202
-0
lines changed

5 files changed

+202
-0
lines changed

‎sound/firewire/Kconfig

Lines changed: 11 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -135,4 +135,15 @@ config SND_FIREWIRE_DIGI00X
135135
To compile this driver as a module, choose M here: the module
136136
will be called snd-firewire-digi00x.
137137

138+
config SND_FIREWIRE_TASCAM
139+
tristate "TASCAM FireWire series support"
140+
select SND_FIREWIRE_LIB
141+
help
142+
Say Y here to include support for TASCAM.
143+
* FW-1884
144+
* FW-1082
145+
146+
To compile this driver as a module, choose M here: the module
147+
will be called snd-firewire-tascam.
148+
138149
endif # SND_FIREWIRE

‎sound/firewire/Makefile

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -12,3 +12,4 @@ obj-$(CONFIG_SND_SCS1X) += snd-scs1x.o
1212
obj-$(CONFIG_SND_FIREWORKS) += fireworks/
1313
obj-$(CONFIG_SND_BEBOB) += bebob/
1414
obj-$(CONFIG_SND_FIREWIRE_DIGI00X) += digi00x/
15+
obj-$(CONFIG_SND_FIREWIRE_TASCAM) += tascam/

‎sound/firewire/tascam/Makefile

Lines changed: 2 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,2 @@
1+
snd-firewire-tascam-objs := tascam.o
2+
obj-$(CONFIG_SND_FIREWIRE_TASCAM) += snd-firewire-tascam.o

‎sound/firewire/tascam/tascam.c

Lines changed: 155 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,155 @@
1+
/*
2+
* tascam.c - a part of driver for TASCAM FireWire series
3+
*
4+
* Copyright (c) 2015 Takashi Sakamoto
5+
*
6+
* Licensed under the terms of the GNU General Public License, version 2.
7+
*/
8+
9+
#include "tascam.h"
10+
11+
MODULE_DESCRIPTION("TASCAM FireWire series Driver");
12+
MODULE_AUTHOR("Takashi Sakamoto <[email protected]>");
13+
MODULE_LICENSE("GPL v2");
14+
15+
static int check_name(struct snd_tscm *tscm)
16+
{
17+
struct fw_device *fw_dev = fw_parent_device(tscm->unit);
18+
char vendor[8];
19+
char model[8];
20+
__u32 data;
21+
22+
/* Retrieve model name. */
23+
data = be32_to_cpu(fw_dev->config_rom[28]);
24+
memcpy(model, &data, 4);
25+
data = be32_to_cpu(fw_dev->config_rom[29]);
26+
memcpy(model + 4, &data, 4);
27+
model[7] = '\0';
28+
29+
/* Retrieve vendor name. */
30+
data = be32_to_cpu(fw_dev->config_rom[23]);
31+
memcpy(vendor, &data, 4);
32+
data = be32_to_cpu(fw_dev->config_rom[24]);
33+
memcpy(vendor + 4, &data, 4);
34+
vendor[7] = '\0';
35+
36+
strcpy(tscm->card->driver, "FW-TASCAM");
37+
strcpy(tscm->card->shortname, model);
38+
strcpy(tscm->card->mixername, model);
39+
snprintf(tscm->card->longname, sizeof(tscm->card->longname),
40+
"%s %s, GUID %08x%08x at %s, S%d", vendor, model,
41+
cpu_to_be32(fw_dev->config_rom[3]),
42+
cpu_to_be32(fw_dev->config_rom[4]),
43+
dev_name(&tscm->unit->device), 100 << fw_dev->max_speed);
44+
45+
return 0;
46+
}
47+
48+
static void tscm_card_free(struct snd_card *card)
49+
{
50+
struct snd_tscm *tscm = card->private_data;
51+
52+
fw_unit_put(tscm->unit);
53+
54+
mutex_destroy(&tscm->mutex);
55+
}
56+
57+
static int snd_tscm_probe(struct fw_unit *unit,
58+
const struct ieee1394_device_id *entry)
59+
{
60+
struct snd_card *card;
61+
struct snd_tscm *tscm;
62+
int err;
63+
64+
/* create card */
65+
err = snd_card_new(&unit->device, -1, NULL, THIS_MODULE,
66+
sizeof(struct snd_tscm), &card);
67+
if (err < 0)
68+
return err;
69+
card->private_free = tscm_card_free;
70+
71+
/* initialize myself */
72+
tscm = card->private_data;
73+
tscm->card = card;
74+
tscm->unit = fw_unit_get(unit);
75+
76+
mutex_init(&tscm->mutex);
77+
78+
err = check_name(tscm);
79+
if (err < 0)
80+
goto error;
81+
82+
err = snd_card_register(card);
83+
if (err < 0)
84+
goto error;
85+
86+
dev_set_drvdata(&unit->device, tscm);
87+
88+
return err;
89+
error:
90+
snd_card_free(card);
91+
return err;
92+
}
93+
94+
static void snd_tscm_update(struct fw_unit *unit)
95+
{
96+
return;
97+
}
98+
99+
static void snd_tscm_remove(struct fw_unit *unit)
100+
{
101+
struct snd_tscm *tscm = dev_get_drvdata(&unit->device);
102+
103+
/* No need to wait for releasing card object in this context. */
104+
snd_card_free_when_closed(tscm->card);
105+
}
106+
107+
static const struct ieee1394_device_id snd_tscm_id_table[] = {
108+
/* FW-1082 */
109+
{
110+
.match_flags = IEEE1394_MATCH_VENDOR_ID |
111+
IEEE1394_MATCH_SPECIFIER_ID |
112+
IEEE1394_MATCH_VERSION,
113+
.vendor_id = 0x00022e,
114+
.specifier_id = 0x00022e,
115+
.version = 0x800003,
116+
},
117+
/* FW-1884 */
118+
{
119+
.match_flags = IEEE1394_MATCH_VENDOR_ID |
120+
IEEE1394_MATCH_SPECIFIER_ID |
121+
IEEE1394_MATCH_VERSION,
122+
.vendor_id = 0x00022e,
123+
.specifier_id = 0x00022e,
124+
.version = 0x800000,
125+
},
126+
/* FW-1804 mey be supported if IDs are clear. */
127+
/* FE-08 requires reverse-engineering because it just has faders. */
128+
{}
129+
};
130+
MODULE_DEVICE_TABLE(ieee1394, snd_tscm_id_table);
131+
132+
static struct fw_driver tscm_driver = {
133+
.driver = {
134+
.owner = THIS_MODULE,
135+
.name = "snd-firewire-tascam",
136+
.bus = &fw_bus_type,
137+
},
138+
.probe = snd_tscm_probe,
139+
.update = snd_tscm_update,
140+
.remove = snd_tscm_remove,
141+
.id_table = snd_tscm_id_table,
142+
};
143+
144+
static int __init snd_tscm_init(void)
145+
{
146+
return driver_register(&tscm_driver.driver);
147+
}
148+
149+
static void __exit snd_tscm_exit(void)
150+
{
151+
driver_unregister(&tscm_driver.driver);
152+
}
153+
154+
module_init(snd_tscm_init);
155+
module_exit(snd_tscm_exit);

‎sound/firewire/tascam/tascam.h

Lines changed: 33 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,33 @@
1+
/*
2+
* tascam.h - a part of driver for TASCAM FireWire series
3+
*
4+
* Copyright (c) 2015 Takashi Sakamoto
5+
*
6+
* Licensed under the terms of the GNU General Public License, version 2.
7+
*/
8+
9+
#ifndef SOUND_TASCAM_H_INCLUDED
10+
#define SOUND_TASCAM_H_INCLUDED
11+
12+
#include <linux/device.h>
13+
#include <linux/firewire.h>
14+
#include <linux/firewire-constants.h>
15+
#include <linux/module.h>
16+
#include <linux/mod_devicetable.h>
17+
#include <linux/mutex.h>
18+
#include <linux/slab.h>
19+
#include <linux/compat.h>
20+
21+
#include <sound/core.h>
22+
#include <sound/initval.h>
23+
24+
#include "../lib.h"
25+
26+
struct snd_tscm {
27+
struct snd_card *card;
28+
struct fw_unit *unit;
29+
30+
struct mutex mutex;
31+
};
32+
33+
#endif

0 commit comments

Comments
 (0)