Merge tag 'mlx5-fixes-2019-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-04-19

This series introduces some fixes to mlx5 driver.

Please pull and let me know if there is any problem.

For -stable v4.7:
  ('net/mlx5e: ethtool, Remove unsupported SFP EEPROM high pages query')

For -stable v4.19:
  ('net/mlx5e: Fix the max MTU check in case of XDP')

For -stable v5.0:
  ('net/mlx5e: Fix use-after-free after xdp_return_frame')
====================

Signed-off-by: David S. Miller <[email protected]>

Author: davem330

drivers/net/ethernet/mellanox/mlx5/core/en/xdp.c

@@ -33,6 +33,26 @@
 #include <linux/bpf_trace.h>
 #include "en/xdp.h"
 
+int mlx5e_xdp_max_mtu(struct mlx5e_params *params)
+{
+	int hr = NET_IP_ALIGN + XDP_PACKET_HEADROOM;
+
+	/* Let S := SKB_DATA_ALIGN(sizeof(struct skb_shared_info)).
+	 * The condition checked in mlx5e_rx_is_linear_skb is:
+	 *   SKB_DATA_ALIGN(sw_mtu + hard_mtu + hr) + S <= PAGE_SIZE         (1)
+	 *   (Note that hw_mtu == sw_mtu + hard_mtu.)
+	 * What is returned from this function is:
+	 *   max_mtu = PAGE_SIZE - S - hr - hard_mtu                         (2)
+	 * After assigning sw_mtu := max_mtu, the left side of (1) turns to
+	 * SKB_DATA_ALIGN(PAGE_SIZE - S) + S, which is equal to PAGE_SIZE,
+	 * because both PAGE_SIZE and S are already aligned. Any number greater
+	 * than max_mtu would make the left side of (1) greater than PAGE_SIZE,
+	 * so max_mtu is the maximum MTU allowed.
+	 */
+
+	return MLX5E_HW2SW_MTU(params, SKB_MAX_HEAD(hr));
+}
+
 static inline bool
 mlx5e_xmit_xdp_buff(struct mlx5e_xdpsq *sq, struct mlx5e_dma_info *di,
 		    struct xdp_buff *xdp)
@@ -304,9 +324,9 @@ bool mlx5e_poll_xdpsq_cq(struct mlx5e_cq *cq, struct mlx5e_rq *rq)
 					mlx5e_xdpi_fifo_pop(xdpi_fifo);
 
 				if (is_redirect) {
-					xdp_return_frame(xdpi.xdpf);
 					dma_unmap_single(sq->pdev, xdpi.dma_addr,
 							 xdpi.xdpf->len, DMA_TO_DEVICE);
+					xdp_return_frame(xdpi.xdpf);
 				} else {
 					/* Recycle RX page */
 					mlx5e_page_release(rq, &xdpi.di, true);
@@ -345,9 +365,9 @@ void mlx5e_free_xdpsq_descs(struct mlx5e_xdpsq *sq, struct mlx5e_rq *rq)
 				mlx5e_xdpi_fifo_pop(xdpi_fifo);
 
 			if (is_redirect) {
-				xdp_return_frame(xdpi.xdpf);
 				dma_unmap_single(sq->pdev, xdpi.dma_addr,
 						 xdpi.xdpf->len, DMA_TO_DEVICE);
+				xdp_return_frame(xdpi.xdpf);
 			} else {
 				/* Recycle RX page */
 				mlx5e_page_release(rq, &xdpi.di, false);

drivers/net/ethernet/mellanox/mlx5/core/en/xdp.h

@@ -34,13 +34,12 @@
 
 #include "en.h"
 
-#define MLX5E_XDP_MAX_MTU ((int)(PAGE_SIZE - \
-				 MLX5_SKB_FRAG_SZ(XDP_PACKET_HEADROOM)))
 #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN)
 #define MLX5E_XDP_TX_EMPTY_DS_COUNT \
 	(sizeof(struct mlx5e_tx_wqe) / MLX5_SEND_WQE_DS)
 #define MLX5E_XDP_TX_DS_COUNT (MLX5E_XDP_TX_EMPTY_DS_COUNT + 1 /* SG DS */)
 
+int mlx5e_xdp_max_mtu(struct mlx5e_params *params);
 bool mlx5e_xdp_handle(struct mlx5e_rq *rq, struct mlx5e_dma_info *di,
 		      void *va, u16 *rx_headroom, u32 *len);
 bool mlx5e_poll_xdpsq_cq(struct mlx5e_cq *cq, struct mlx5e_rq *rq);

drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c

@@ -1586,7 +1586,7 @@ static int mlx5e_get_module_info(struct net_device *netdev,
 		break;
 	case MLX5_MODULE_ID_SFP:
 		modinfo->type       = ETH_MODULE_SFF_8472;
-		modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+		modinfo->eeprom_len = MLX5_EEPROM_PAGE_LENGTH;
 		break;
 	default:
 		netdev_err(priv->netdev, "%s: cable type not recognized:0x%x\n",

drivers/net/ethernet/mellanox/mlx5/core/en_main.c

@@ -3777,7 +3777,7 @@ int mlx5e_change_mtu(struct net_device *netdev, int new_mtu,
 	if (params->xdp_prog &&
 	    !mlx5e_rx_is_linear_skb(priv->mdev, &new_channels.params)) {
 		netdev_err(netdev, "MTU(%d) > %d is not allowed while XDP enabled\n",
-			   new_mtu, MLX5E_XDP_MAX_MTU);
+			   new_mtu, mlx5e_xdp_max_mtu(params));
 		err = -EINVAL;
 		goto out;
 	}
@@ -4212,7 +4212,8 @@ static int mlx5e_xdp_allowed(struct mlx5e_priv *priv, struct bpf_prog *prog)
 
 	if (!mlx5e_rx_is_linear_skb(priv->mdev, &new_channels.params)) {
 		netdev_warn(netdev, "XDP is not allowed with MTU(%d) > %d\n",
-			    new_channels.params.sw_mtu, MLX5E_XDP_MAX_MTU);
+			    new_channels.params.sw_mtu,
+			    mlx5e_xdp_max_mtu(&new_channels.params));
 		return -EINVAL;
 	}
 

drivers/net/ethernet/mellanox/mlx5/core/port.c

@@ -317,10 +317,6 @@ int mlx5_query_module_eeprom(struct mlx5_core_dev *dev,
 		size -= offset + size - MLX5_EEPROM_PAGE_LENGTH;
 
 	i2c_addr = MLX5_I2C_ADDR_LOW;
-	if (offset >= MLX5_EEPROM_PAGE_LENGTH) {
-		i2c_addr = MLX5_I2C_ADDR_HIGH;
-		offset -= MLX5_EEPROM_PAGE_LENGTH;
-	}
 
 	MLX5_SET(mcia_reg, in, l, 0);
 	MLX5_SET(mcia_reg, in, module, module_num);