Merge branch 'i2c/for-current-fixed' into i2c/for-5.8

Author: wsakernel

.clang-format

@@ -142,10 +142,13 @@ ForEachMacros:
   - 'for_each_card_auxs'
   - 'for_each_card_auxs_safe'
   - 'for_each_card_components'
+  - 'for_each_card_dapms'
   - 'for_each_card_pre_auxs'
   - 'for_each_card_prelinks'
   - 'for_each_card_rtds'
   - 'for_each_card_rtds_safe'
+  - 'for_each_card_widgets'
+  - 'for_each_card_widgets_safe'
   - 'for_each_cgroup_storage_type'
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
@@ -160,6 +163,7 @@ ForEachMacros:
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
+  - 'for_each_dapm_widgets'
   - 'for_each_dev_addr'
   - 'for_each_dev_scope'
   - 'for_each_displayid_db'
@@ -170,7 +174,6 @@ ForEachMacros:
   - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
-  - 'for_each_efi_handle'
   - 'for_each_efi_memory_desc'
   - 'for_each_efi_memory_desc_in_map'
   - 'for_each_element'
@@ -191,6 +194,7 @@ ForEachMacros:
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
   - 'for_each_link_codecs'
+  - 'for_each_link_cpus'
   - 'for_each_link_platforms'
   - 'for_each_lru'
   - 'for_each_matching_node'
@@ -250,6 +254,7 @@ ForEachMacros:
   - 'for_each_pci_bridge'
   - 'for_each_pci_dev'
   - 'for_each_pci_msi_entry'
+  - 'for_each_pcm_streams'
   - 'for_each_populated_zone'
   - 'for_each_possible_cpu'
   - 'for_each_present_cpu'
@@ -260,9 +265,12 @@ ForEachMacros:
   - 'for_each_property_of_node'
   - 'for_each_registered_fb'
   - 'for_each_reserved_mem_region'
-  - 'for_each_rtd_codec_dai'
-  - 'for_each_rtd_codec_dai_rollback'
+  - 'for_each_rtd_codec_dais'
+  - 'for_each_rtd_codec_dais_rollback'
   - 'for_each_rtd_components'
+  - 'for_each_rtd_cpu_dais'
+  - 'for_each_rtd_cpu_dais_rollback'
+  - 'for_each_rtd_dais'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
   - 'for_each_set_clump8'
@@ -334,6 +342,7 @@ ForEachMacros:
   - 'klp_for_each_object'
   - 'klp_for_each_object_safe'
   - 'klp_for_each_object_static'
+  - 'kunit_suite_for_each_test_case'
   - 'kvm_for_each_memslot'
   - 'kvm_for_each_vcpu'
   - 'list_for_each'
@@ -387,6 +396,7 @@ ForEachMacros:
   - 'of_property_for_each_string'
   - 'of_property_for_each_u32'
   - 'pci_bus_for_each_resource'
+  - 'pcm_for_each_format'
   - 'ping_portaddr_for_each_entry'
   - 'plist_for_each'
   - 'plist_for_each_continue'
@@ -482,7 +492,7 @@ KeepEmptyLinesAtTheStartOfBlocks: false
 MacroBlockBegin: ''
 MacroBlockEnd: ''
 MaxEmptyLinesToKeep: 1
-NamespaceIndentation: Inner
+NamespaceIndentation: None
 #ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
 ObjCBlockIndentWidth: 8
 ObjCSpaceAfterProperty: true

.mailmap

@@ -288,6 +288,8 @@ Vladimir Davydov <[email protected]> <[email protected]>
 Vladimir Davydov <[email protected]> <[email protected]>
 Takashi YOSHII <[email protected]>
 Will Deacon <[email protected]> <[email protected]>
+Wolfram Sang <[email protected]> <[email protected]>
+Wolfram Sang <[email protected]> <[email protected]>
 Yakir Yang <[email protected]> <[email protected]>
 Yusuke Goda <[email protected]>
 Gustavo Padovan <[email protected]>

Documentation/admin-guide/device-mapper/dm-integrity.rst

@@ -182,12 +182,15 @@ fix_padding
 	space-efficient. If this option is not present, large padding is
 	used - that is for compatibility with older kernels.
 
-
-The journal mode (D/J), buffer_sectors, journal_watermark, commit_time can
-be changed when reloading the target (load an inactive table and swap the
-tables with suspend and resume). The other arguments should not be changed
-when reloading the target because the layout of disk data depend on them
-and the reloaded target would be non-functional.
+allow_discards
+	Allow block discard requests (a.k.a. TRIM) for the integrity device.
+	Discards are only allowed to devices using internal hash.
+
+The journal mode (D/J), buffer_sectors, journal_watermark, commit_time and
+allow_discards can be changed when reloading the target (load an inactive
+table and swap the tables with suspend and resume). The other arguments
+should not be changed when reloading the target because the layout of disk
+data depend on them and the reloaded target would be non-functional.
 
 
 The layout of the formatted block device:

Documentation/admin-guide/kernel-parameters.txt

@@ -5187,8 +5187,7 @@
 
 	usbcore.old_scheme_first=
 			[USB] Start with the old device initialization
-			scheme,  applies only to low and full-speed devices
-			 (default 0 = off).
+			scheme (default 0 = off).
 
 	usbcore.usbfs_memory_mb=
 			[USB] Memory limit (in MB) for buffers allocated by

Documentation/admin-guide/sysctl/kernel.rst

@@ -390,20 +390,33 @@ When ``kptr_restrict`` is set to 2, kernel pointers printed using
 modprobe
 ========
 
-This gives the full path of the modprobe command which the kernel will
-use to load modules. This can be used to debug module loading
-requests::
+The full path to the usermode helper for autoloading kernel modules,
+by default "/sbin/modprobe".  This binary is executed when the kernel
+requests a module.  For example, if userspace passes an unknown
+filesystem type to mount(), then the kernel will automatically request
+the corresponding filesystem module by executing this usermode helper.
+This usermode helper should insert the needed module into the kernel.
+
+This sysctl only affects module autoloading.  It has no effect on the
+ability to explicitly insert modules.
+
+This sysctl can be used to debug module loading requests::
 
     echo '#! /bin/sh' > /tmp/modprobe
     echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe
     echo 'exec /sbin/modprobe "$@"' >> /tmp/modprobe
     chmod a+x /tmp/modprobe
     echo /tmp/modprobe > /proc/sys/kernel/modprobe
 
-This only applies when the *kernel* is requesting that the module be
-loaded; it won't have any effect if the module is being loaded
-explicitly using ``modprobe`` from userspace.
+Alternatively, if this sysctl is set to the empty string, then module
+autoloading is completely disabled.  The kernel will not try to
+execute a usermode helper at all, nor will it call the
+kernel_module_request LSM hook.
 
+If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
+then the configured static usermode helper overrides this sysctl,
+except that the empty string is still accepted to completely disable
+module autoloading as described above.
 
 modules_disabled
 ================
@@ -446,28 +459,6 @@ Notes:
      successful IPC object allocation. If an IPC object allocation syscall
      fails, it is undefined if the value remains unmodified or is reset to -1.
 
-modprobe:
-=========
-
-The path to the usermode helper for autoloading kernel modules, by
-default "/sbin/modprobe".  This binary is executed when the kernel
-requests a module.  For example, if userspace passes an unknown
-filesystem type to mount(), then the kernel will automatically request
-the corresponding filesystem module by executing this usermode helper.
-This usermode helper should insert the needed module into the kernel.
-
-This sysctl only affects module autoloading.  It has no effect on the
-ability to explicitly insert modules.
-
-If this sysctl is set to the empty string, then module autoloading is
-completely disabled.  The kernel will not try to execute a usermode
-helper at all, nor will it call the kernel_module_request LSM hook.
-
-If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
-then the configured static usermode helper overrides this sysctl,
-except that the empty string is still accepted to completely disable
-module autoloading as described above.
-
 nmi_watchdog
 ============
 

Documentation/arm64/amu.rst

@@ -23,13 +23,14 @@ optional external memory-mapped interface.
 
 Version 1 of the Activity Monitors architecture implements a counter group
 of four fixed and architecturally defined 64-bit event counters.
-  - CPU cycle counter: increments at the frequency of the CPU.
-  - Constant counter: increments at the fixed frequency of the system
-    clock.
-  - Instructions retired: increments with every architecturally executed
-    instruction.
-  - Memory stall cycles: counts instruction dispatch stall cycles caused by
-    misses in the last level cache within the clock domain.
+
+- CPU cycle counter: increments at the frequency of the CPU.
+- Constant counter: increments at the fixed frequency of the system
+  clock.
+- Instructions retired: increments with every architecturally executed
+  instruction.
+- Memory stall cycles: counts instruction dispatch stall cycles caused by
+  misses in the last level cache within the clock domain.
 
 When in WFI or WFE these counters do not increment.
 
@@ -57,11 +58,12 @@ counters, only the presence of the extension.
 
 Firmware (code running at higher exception levels, e.g. arm-tf) support is
 needed to:
- - Enable access for lower exception levels (EL2 and EL1) to the AMU
-   registers.
- - Enable the counters. If not enabled these will read as 0.
- - Save/restore the counters before/after the CPU is being put/brought up
-   from the 'off' power state.
+
+- Enable access for lower exception levels (EL2 and EL1) to the AMU
+  registers.
+- Enable the counters. If not enabled these will read as 0.
+- Save/restore the counters before/after the CPU is being put/brought up
+  from the 'off' power state.
 
 When using kernels that have this feature enabled but boot with broken
 firmware the user may experience panics or lockups when accessing the
@@ -78,10 +80,11 @@ are not trapped in EL2/EL3.
 
 The fixed counters of AMUv1 are accessible though the following system
 register definitions:
- - SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+- SYS_AMEVCNTR0_CORE_EL0
+- SYS_AMEVCNTR0_CONST_EL0
+- SYS_AMEVCNTR0_INST_RET_EL0
+- SYS_AMEVCNTR0_MEM_STALL_EL0
 
 Auxiliary platform specific counters can be accessed using
 SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
@@ -93,9 +96,10 @@ Userspace access
 ----------------
 
 Currently, access from userspace to the AMU registers is disabled due to:
- - Security reasons: they might expose information about code executed in
-   secure mode.
- - Purpose: AMU counters are intended for system management use.
+
+- Security reasons: they might expose information about code executed in
+  secure mode.
+- Purpose: AMU counters are intended for system management use.
 
 Also, the presence of the feature is not visible to userspace.
 
@@ -105,8 +109,9 @@ Virtualization
 
 Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
 guest side is disabled due to:
- - Security reasons: they might expose information about code executed
-   by other guests or the host.
+
+- Security reasons: they might expose information about code executed
+  by other guests or the host.
 
 Any attempt to access the AMU registers will result in an UNDEFINED
 exception being injected into the guest.

Documentation/core-api/timekeeping.rst

@@ -154,9 +154,9 @@ architectures. These are the recommended replacements:
 
 	Use ktime_get() or ktime_get_ts64() instead.
 
-.. c:function:: struct timeval do_gettimeofday( void )
-		struct timespec getnstimeofday( void )
-		struct timespec64 getnstimeofday64( void )
+.. c:function:: void do_gettimeofday( struct timeval * )
+		void getnstimeofday( struct timespec * )
+		void getnstimeofday64( struct timespec64 * )
 		void ktime_get_real_ts( struct timespec * )
 
 	ktime_get_real_ts64() is a direct replacement, but consider using

Documentation/devicetree/bindings/Makefile

@@ -2,6 +2,7 @@
 DT_DOC_CHECKER ?= dt-doc-validate
 DT_EXTRACT_EX ?= dt-extract-example
 DT_MK_SCHEMA ?= dt-mk-schema
+DT_MK_SCHEMA_USERONLY_FLAG := $(if $(DT_SCHEMA_FILES), -u)
 
 quiet_cmd_chk_binding = CHKDT   $(patsubst $(srctree)/%,%,$<)
       cmd_chk_binding = $(DT_DOC_CHECKER) -u $(srctree)/$(src) $< ; \
@@ -13,16 +14,18 @@ $(obj)/%.example.dts: $(src)/%.yaml FORCE
 # Use full schemas when checking %.example.dts
 DT_TMP_SCHEMA := $(obj)/processed-schema-examples.yaml
 
+find_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \
+		-name 'processed-schema*' ! \
+		-name '*.example.dt.yaml' \)
+
 quiet_cmd_mk_schema = SCHEMA  $@
-      cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(real-prereqs)
+      cmd_mk_schema = rm -f $@ ; \
+                      $(if $(DT_MK_SCHEMA_FLAGS), \
+                           echo $(real-prereqs), \
+                           $(find_cmd)) | \
+                      xargs $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) >> $@
 
-DT_DOCS = $(addprefix $(src)/, \
-	$(shell \
-	cd $(srctree)/$(src) && \
-	find * \( -name '*.yaml' ! \
-		-name 'processed-schema*' ! \
-		-name '*.example.dt.yaml' \) \
-	))
+DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||')
 
 DT_SCHEMA_FILES ?= $(DT_DOCS)
 
@@ -37,7 +40,7 @@ override DTC_FLAGS := \
 $(obj)/processed-schema-examples.yaml: $(DT_DOCS) FORCE
 	$(call if_changed,mk_schema)
 
-$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := -u
+$(obj)/processed-schema.yaml: DT_MK_SCHEMA_FLAGS := $(DT_MK_SCHEMA_USERONLY_FLAG)
 $(obj)/processed-schema.yaml: $(DT_SCHEMA_FILES) FORCE
 	$(call if_changed,mk_schema)
 

Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml

@@ -42,6 +42,10 @@ properties:
     description:
       See section 2.3.9 of the DeviceTree Specification.
 
+  '#address-cells': true
+
+  '#size-cells': true
+
 required:
   - "#interconnect-cells"
   - compatible
@@ -59,6 +63,8 @@ examples:
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
+        #address-cells = <1>;
+        #size-cells = <1>;
         dma-ranges = <0x00000000 0x40000000 0x20000000>;
         #interconnect-cells = <1>;
     };

Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml

@@ -91,7 +91,7 @@ required:
 
 examples:
   - |
-    vco1: clock@00 {
+    vco1: clock {
       compatible = "arm,impd1-vco1";
       #clock-cells = <0>;
       lock-offset = <0x08>;

Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt

@@ -1,5 +1,5 @@
-Analog Device ADV7123 Video DAC
--------------------------------
+Analog Devices ADV7123 Video DAC
+--------------------------------
 
 The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
 parallel video input.

Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt

@@ -1,5 +1,5 @@
-Analog Device ADV7511(W)/13/33/35 HDMI Encoders
------------------------------------------
+Analog Devices ADV7511(W)/13/33/35 HDMI Encoders
+------------------------------------------------
 
 The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
 transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space

Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml

@@ -37,7 +37,6 @@ examples:
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "leadtek,ltk500hd1829";