16 bit SBC encoder write failed

[aqildad-create]

16 bit pcm write successful while 16 bit SBC encoder write failed

For sbc encoder i follow below example to write to SBCencoder ,

https://github.com/pschatzmann/arduino-audio-tools/blob/b85adbfe209680028ee6962725a1bb3bf0bf48e8/sandbox/wav_encode/wav_encode.ino

I write to pcm fle and encoderfle at same loop .( PCM write success WHILE sbc Not )

Pseudo code

SBCEncoder encoder(EncodedDataFile);
encoder.begin();
.

loop>> this is loop ..
.dataFile.write( (uint8_t *)samples , bytes_wrte ) ;// 16 bt pcm record/write successful
encoder.write(samples, bytes_wrte); // 16 bit encoder write not successful

.
.
.
.

below are logs of SBC AND MY CONCERNS

[E] CodecSBC.h : 330 - Invalid sample_rate: 0 -- DO WE NEED TO Define SEPERATE SAMPLNG RATE FOR SBC if yes were to define ???
[E] CodecSBC.h : 273 - inactive ---------------------------why this inactive ? what this means and how to correct ??

I] I2SConfig.h : 106 - rx/tx mode: RX_MODE
[I] I2SConfig.h : 107 - port_no: 0
[I] I2SConfig.h : 108 - is_master: Master
[I] I2SConfig.h : 109 - sample rate: 44100
[I] I2SConfig.h : 110 - bits per sample: 32 ------ this is 2s 32 bit but later in code converted to 16 bit ..conversion is success
[I] I2SConfig.h : 111 - number of channels: 1
[I] I2SConfig.h : 112 - i2s_format: I2S_STD_FORMAT
[I] I2SConfig.h : 114 - auto_clear: false
[I] I2SConfig.h : 121 - buffer_count:6
[I] I2SConfig.h : 122 - buffer_size:512
[I] I2SConfig.h : 126 - pin_bck: 14
[I] I2SConfig.h : 128 - pin_ws: 15
[I] I2SConfig.h : 130 - pin_data: 32
[I] CodecSBC.h : 247 - virtual void audio_tools::SBCEncoder::begin()
[E] CodecSBC.h : 330 - Invalid sample_rate: 0
[E] CodecSBC.h : 273 - inactive
[E] CodecSBC.h : 273 - inactive
[E] CodecSBC.h : 273 - inactive
[E] CodecSBC.h : 273 - inactive
[E] CodecSBC.h : 273 - inactive
[E] CodecSBC.h : 273 - inactive
[E] CodecSBC.h : 273 - inactive